AFE5808

現行

適用超音波且具被動 CW 混波器的 8 通道低雜訊類比前端

產品詳細資料

Device type Receiver Number of input channels 8 Active supply current (typ) (mA) 133 Supply voltage (max) (V) 3.6 Operating temperature range (°C) 0 to 70 Interface type Serial LVDS Features Analog Front End (AFE) Rating Catalog
Device type Receiver Number of input channels 8 Active supply current (typ) (mA) 133 Supply voltage (max) (V) 3.6 Operating temperature range (°C) 0 to 70 Interface type Serial LVDS Features Analog Front End (AFE) Rating Catalog
NFBGA (ZCF) 135 135 mm² 9 x 15
  • 8-Channel Complete Analog Front-End
    • LNA, VCAT, PGA, LPF,
      ADC, and CW Mixer
  • Programmable Gain Low-Noise Amplifier (LNA)
    • 24/18/12 dB Gain
    • 0.25/0.5/1 VPP Linear Input Range
    • 0.63/0.7/0.9 nV/rtHz Input Referred Noise
    • Programmable Active Termination
  • 40 dB Low Noise Voltage Controlled Attenuator (VCAT)
  • 24/30 dB Programmable Gain Amplifier (PGA)
  • 3rd Order Linear Phase Low-Pass Filter (LPF)
    • 10, 15, 20, 30 MHz
  • 14-bit Analog to Digital Converter (ADC)
    • 77 dBFS SNR at 65 MSPS
    • LVDS Outputs
  • Noise/Power Optimizations (Full Chain)
    • 153 mW/CH at 0.75 nV/rtHz, 65 MSPS
    • 98 mW/CH at 1.1 nV/rtHz, 40 MSPS
    • 80 mW/CH at CW Mode
  • Excellent Device-to-Device Gain Matching
    • ±0.5 dB (typical) and ±0.9 dB (max)
  • Low Harmonic Distortion
  • Fast and Consistent Overload Recovery
  • Passive Mixer for Continuous Wave Doppler (CWD)
    • Low Close-in Phase Noise –156 dBc/Hz
      at 1 KHz off 2.5 MHz Carrier
    • Phase Resolution of 1/16λ
    • Support 16X, 8X, 4X and 1X CW Clocks
    • 12-dB Suppression on 3rd and 5th Harmonics
    • Flexible Input Clocks
  • Small Package: 15 mm × 9 mm, 135-BGA
  • APPLICATIONS
    • Medical Ultrasound Imaging
    • Nondestructive Evaluation Equipments
    • 8-Channel Complete Analog Front-End
      • LNA, VCAT, PGA, LPF,
        ADC, and CW Mixer
    • Programmable Gain Low-Noise Amplifier (LNA)
      • 24/18/12 dB Gain
      • 0.25/0.5/1 VPP Linear Input Range
      • 0.63/0.7/0.9 nV/rtHz Input Referred Noise
      • Programmable Active Termination
    • 40 dB Low Noise Voltage Controlled Attenuator (VCAT)
    • 24/30 dB Programmable Gain Amplifier (PGA)
    • 3rd Order Linear Phase Low-Pass Filter (LPF)
      • 10, 15, 20, 30 MHz
    • 14-bit Analog to Digital Converter (ADC)
      • 77 dBFS SNR at 65 MSPS
      • LVDS Outputs
    • Noise/Power Optimizations (Full Chain)
      • 153 mW/CH at 0.75 nV/rtHz, 65 MSPS
      • 98 mW/CH at 1.1 nV/rtHz, 40 MSPS
      • 80 mW/CH at CW Mode
    • Excellent Device-to-Device Gain Matching
      • ±0.5 dB (typical) and ±0.9 dB (max)
    • Low Harmonic Distortion
    • Fast and Consistent Overload Recovery
    • Passive Mixer for Continuous Wave Doppler (CWD)
      • Low Close-in Phase Noise –156 dBc/Hz
        at 1 KHz off 2.5 MHz Carrier
      • Phase Resolution of 1/16λ
      • Support 16X, 8X, 4X and 1X CW Clocks
      • 12-dB Suppression on 3rd and 5th Harmonics
      • Flexible Input Clocks
    • Small Package: 15 mm × 9 mm, 135-BGA
  • APPLICATIONS
    • Medical Ultrasound Imaging
    • Nondestructive Evaluation Equipments
  • The AFE5808 is a highly integrated analog front-end (AFE) solution specifically designed for ultrasound systems in which high performance and small size are required. The AFE5808 integrates a complete time-gain-control (TGC) imaging path and a continuous wave Doppler (CWD) path. It also enables users to select one of various power/noise combinations to optimize system performance. Therefore, the AFE5808 is a suitable ultrasound analog front end solution not only for high-end systems, but also for portable ones.

    The AFE5808 contains eight channels of voltage controlled amplifier (VCA), 14/12-bit Analog-to-Digital Converter (ADC), and CW mixer. The VCA includes Low noise Amplifier(LNA), Voltage controlled Attenuator(VCAT), Programmable Gain Amplifier(PGA), and Low-Pass Filter (LPF). The LNA gain is programmable to support 250 mVPP to 1 VPP input signals. Programmable active termination is also supported by the LNA. The ultra-low noise VCAT provides an attenuation control range of 40 dB and improves overall low gain SNR which benefits harmonic imaging and near field imaging. The PGA provides gain options of 24 dB and 30 dB. Before the ADC, a LPF can be configured as 10, 15, 20, or 30 MHz to support ultrasound applications with different frequencies. The high-performance 14 bit/65 MSPS ADC in the AFE5808 achieves 77 dBFS SNR. It ensures excellent SNR at low chain gain. The ADC’s LVDS outputs enable flexible system integration desired for miniaturized systems.

    The AFE5808 also integrates a low power passive mixer and a low noise summing amplifier to accomplish on-chip CWD beamformer. 16 selectable phase-delays can be applied to each analog input signal. Meanwhile a unique 3rd and 5th order harmonic suppression filter is implemented to enhance CW sensitivity.

    The AFE5808 is available in a 15-mm × 9-mm, 135-pin BGA package and it is specified for operation from 0°C to 85°C. It is also pin-to-pin compatible to the AFE5807, AFE5803, and AFE5808A.

    The AFE5808 is a highly integrated analog front-end (AFE) solution specifically designed for ultrasound systems in which high performance and small size are required. The AFE5808 integrates a complete time-gain-control (TGC) imaging path and a continuous wave Doppler (CWD) path. It also enables users to select one of various power/noise combinations to optimize system performance. Therefore, the AFE5808 is a suitable ultrasound analog front end solution not only for high-end systems, but also for portable ones.

    The AFE5808 contains eight channels of voltage controlled amplifier (VCA), 14/12-bit Analog-to-Digital Converter (ADC), and CW mixer. The VCA includes Low noise Amplifier(LNA), Voltage controlled Attenuator(VCAT), Programmable Gain Amplifier(PGA), and Low-Pass Filter (LPF). The LNA gain is programmable to support 250 mVPP to 1 VPP input signals. Programmable active termination is also supported by the LNA. The ultra-low noise VCAT provides an attenuation control range of 40 dB and improves overall low gain SNR which benefits harmonic imaging and near field imaging. The PGA provides gain options of 24 dB and 30 dB. Before the ADC, a LPF can be configured as 10, 15, 20, or 30 MHz to support ultrasound applications with different frequencies. The high-performance 14 bit/65 MSPS ADC in the AFE5808 achieves 77 dBFS SNR. It ensures excellent SNR at low chain gain. The ADC’s LVDS outputs enable flexible system integration desired for miniaturized systems.

    The AFE5808 also integrates a low power passive mixer and a low noise summing amplifier to accomplish on-chip CWD beamformer. 16 selectable phase-delays can be applied to each analog input signal. Meanwhile a unique 3rd and 5th order harmonic suppression filter is implemented to enhance CW sensitivity.

    The AFE5808 is available in a 15-mm × 9-mm, 135-pin BGA package and it is specified for operation from 0°C to 85°C. It is also pin-to-pin compatible to the AFE5807, AFE5803, and AFE5808A.

    下載 觀看有字幕稿的影片 影片

    技術文件

    star =TI 所選的此產品重要文件
    找不到結果。請清除您的搜尋條件,然後再試一次。
    檢視所有 4
    重要文件 類型 標題 格式選項 日期
    * Data sheet Fully Integrated, 8-Channel Ultrasound Analog Front End for Ultrasound with Pass datasheet (Rev. D) 2014年 1月 31日
    Application note Understanding Serial LVDS Capture in High-Speed ADCs 2013年 7月 10日
    More literature Ultrasound flyer (Rev. A) 2011年 9月 22日
    User guide AFE5807/08EVM (Rev D) Users Manual 2010年 12月 14日

    設計與開發

    如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

    開發模組 (EVM) 的 GUI

    DATACONVERTERPRO-SW High Speed Data Converter Pro GUI Installer, v5.31

    This high-speed data converter pro GUI is a PC (Windows® XP/7/10 compatible) program designed to aid in evaluation of most TI high-speed data converter [analog-to-digital converter (ADC) and digital-to-analog converter (DAC)] and analog front-end (AFE) platforms. Designed to support the entire (...)

    支援產品和硬體

    支援產品和硬體

    開發模組 (EVM) 的 GUI

    SLOC230 AFE5808/08A EVM GUI Installer

    支援產品和硬體

    支援產品和硬體

    下載選項
    支援軟體

    SLOC231 TSW1250EVM Software

    支援產品和硬體

    支援產品和硬體

    模擬型號

    AFE5808 IBIS Models

    SLOC232.ZIP (110 KB) - IBIS Model
    模擬型號

    AFE5808 PSpice Model (Rev. A)

    SLOM246A.ZIP (74 KB) - PSpice Model
    模擬型號

    AFE5808 PSpice Transient Model

    SLOM282.ZIP (43 KB) - PSpice Model
    模擬型號

    AFE5808 TINA-TI Reference Design

    SLOM283.TSC (106 KB) - TINA-TI Reference Design
    模擬型號

    AFE5808 TINA-TI Spice Model

    SLOM284.ZIP (63 KB) - TINA-TI Spice Model
    模擬型號

    AFE5808 TINA-TI Transient Reference Design

    SLOM285.TSC (63 KB) - TINA-TI Reference Design
    模擬型號

    AFE5808 TINA-TI Transient Spice Model

    SLOM286.ZIP (35 KB) - TINA-TI Spice Model
    模擬工具

    PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

    PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一,涵蓋我們的類比和電源產品組合,以及特定類比行為模型,且使用無需支付費用。

    PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前,建立完整的終端設備設計和解決方案原型,進而縮短上市時間並降低開發成本。 

    在 PSpice for TI 設計與模擬工具中,您可以搜尋 TI (...)
    封裝 針腳 CAD 符號、佔位空間與 3D 模型
    NFBGA (ZCF) 135 Ultra Librarian

    訂購與品質

    內含資訊:
    • RoHS
    • REACH
    • 產品標記
    • 鉛塗層/球物料
    • MSL 等級/回焊峰值
    • MTBF/FIT 估算值
    • 材料內容
    • 認證摘要
    • 進行中的可靠性監測
    內含資訊:
    • 晶圓廠位置
    • 組裝地點

    建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

    支援與培訓

    內含 TI 工程師技術支援的 TI E2E™ 論壇

    內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

    若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

    影片