AFE7950
- Request full data sheet
- Quad RF sampling 12GSPS transmit DACs
- Quad RF sampling 3GSPS receive ADCs
- Dual RF sampling 3GSPS feedback (auxilliary RX) ADCs
- Maximum RF signal bandwidth:
- 4TX or 2FB: 1200MHz or 2TX: 2400MHz
- RX: 1200MHz (no FB), 600MHz (with FB)
- RF frequency range:
- TX: 600MHz - 12GHz
- RX/FB: 600MHz -12GHz
- Digital step attenuators (DSA):
- TX: 40dB range, 0.125dB steps
- RX or FB: 25dB range, 0.5dB steps
- Single or dual-band DUC or DDCs for TX and RX
- 16x NCOs per TX or RX and FB
- Optional Internal PLL or VCO for DAC or ADC clocks or external clock at DAC or ADC sample rate
- SerDes data interface:
- JESD204B and JESD204C compatible
- 8 SerDes transceivers up to 29.5Gbps
- Subclass 1 multi-device synchronization
- Package: 17mm × 17mm FCBGA, 0.8mm pitch
The AFE7950 is a high performance, wide bandwidth multi-channel transceiver, integrating four RF sampling transmitter chains, four RF sampling receiver chains and two RF sampling feedback chains (six RF sampling ADCs total). With operation up to 12 GHz, this device enables direct RF sampling in the L, S, C and X-band frequency ranges without the need for additional frequency conversions stages. This improvement in density and flexibility enables high-channel-count, multi-mission systems.
The TX signal paths support interpolation and digital up conversion options that deliver up to 1200MHz of signal bandwidth for four TX or 2400MHz for two TX. The output of the DUCs drives a 12GSPS DAC (digital to analog converter) with a mixed mode output option to enhance 2nd Nyquist operation. The DAC output includes a variable gain amplifier (TX DSA) with 40-dB range and 1dB analog and 0.125dB digital steps.
Each receiver chain includes a 25dB range DSA (Digital Step Attenuator), followed by a 3GSPS ADC (analog-to-digital converter). Each receiver channel has an analog peak power detector and various digital power detectors to assist an external or internal autonomous automatic gain controller, and RF overload detectors for device reliability protection. Flexible decimation options provide optimization of data bandwidth up to 1200MHz for four RX without FB paths or 600MHz with two FB paths (1200MHz BW each).
您可能會感興趣的類似產品
具備升級功能,可直接投入使用替代所比較的裝置。
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | AFE7950 4T6R RF Sampling AFE with 12GSPS DACs and 3GSPS ADCs datasheet (Rev. E) | PDF | HTML | 2025/5/2 | ||
| 應用說明 | AFE79xx Bringup Using HDL Module Without Microcontroller | PDF | HTML | 2025/8/14 | |||
| 應用說明 | AFE79XX as a Chirp Signal Generator | PDF | HTML | 2024/7/10 | |||
| 應用說明 | Debugging AFE7950 for Run Time and Post Bring-Up Failure | PDF | HTML | 2024/6/28 | |||
| 使用指南 | AFE79xx SPI Bringup Guide With Xilinx FPGAs (Rev. A) | PDF | HTML | 2024/5/5 | |||
| 應用說明 | AFE79xx as Single Chip Wideband Repeater Solution (Rev. A) | PDF | HTML | 2023/5/30 | |||
| 應用說明 | Determining Optimal Receive Buffer Delay in JESD204B and JESD204C Receivers | PDF | HTML | 2022/7/7 | |||
| 應用說明 | Getting the Most of Your Data Converter Clocking System Using LMX1204 | PDF | HTML | 2022/6/23 | |||
| 應用說明 | AFE7950 Super-Heterodyne Solution for K-Band | PDF | HTML | 2022/2/15 | |||
| 應用說明 | Powering the AFE7920 with the TPS62913 Low-Ripple and Low-Noise Buck Converter (Rev. A) | PDF | HTML | 2021/12/13 | |||
| 應用說明 | How to Achieve Frequency Hopping with the AFE79xx | 2020/7/2 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
AFE7950EVM — 適用於四傳輸、六接收、X 頻段、射頻取樣 AFE 的 AFE7950 評估模組
AFE7950 系列評估模組 (EVM) 是靈活的射頻取樣收發器平台,可配置為支援最多同時四個發射、四個接收與兩個回饋 (4T4R+2FB) 通道。此 EVM 設計可介接以下所示 TI 模式/擷取卡解決方案 (分開販售) 以及許多符合 FPGA FMC 標準的開發套件。
TRF-LSC-AFE7950EVM — 適用於 4T4R+2FB 射頻取樣 AFE 的 TRF1208、TRF1108、AFE7950 評估模組
TRF-LSC-AFE7950EVM 評估模組用於評估 TI AFE79xx 系列整合式 RF 取樣收發器的性能,其 RX 配置 TI TRF1208 單端轉差分放大器,TX 配置 TI TRF1108 差分轉單端放大器。AFE79xx 裝置支援最多四發射通道、四接收通道及兩回饋通道 (4T4R2F),並整合用於產生資料轉換器時鐘的鎖相迴路 (PLL) 及電壓控制振盪器 (VCO)。AFE79xx 整合八個 JESD204B 及 JESD204C 相容的串聯器或解串器 (SerDes) 收發器。這些收發器可透過板載 FPGA 夾層介面卡 (FMC) 連接器,以最高 29.5 Gbps (...)
TRF-X-AFE7950EVM — TRF1213 和 AFE7950 評估模組
AFE79XX-HSC-DESIGN — AFE79xx family high-speed transceiver design & support files
TI204C-IP — Request for JESD204 rapid design IP
JESD204 快速設計 IP 被設計用於幫助 FPGA 工程師快速實現可運作的 JESD204 系統,從而加速開發過程。該 IP 的架構設計使得下游數位處理和其他應用邏輯能夠隔離於 JESD204 通訊協定的大多數性能和時序關鍵約束之外。該 IP 能夠幫助設計人員減少韌體開發時間並簡化 FPGA 的整合。
JESD204 快速設計 IP 無需權利金,用於 TI 高速資料轉換器。TI 將協助使用者配置初始連結,針對特定 FPGA 平台與 TI 資料轉換器 JMODE 之間的使用進行自訂。TI 將在 IP 測試完成並準備部署後,透過安全下載連結提供 IP。
JESD204 快速設計 IP 支援下列 (...)
DATACONVERTERPRO-SW — 高速資料轉換器 Pro GUI 安裝程式,v5.31
這款高速資料轉換器專業 GUI 是一款 PC(與 Windows® XP/7/10 相容)程式,旨在協助評估大多數 TI 高速資料轉換器 [類比轉數位轉換器 (ADC) 和數位轉類比轉換器 (DAC)] 和類比前端 (AFE) 平台。DATACONVERTERPRO-SW 旨在支援整個 TSW14xxx 系列資料擷取和模式產生卡,為時域和頻域中的資料轉換器分析提供強大且快速的解決方案,並支援單音、多音和調變訊號。此 GUI 也與 TI 模式產生 GUI 相容,可快速合成單音、多音和調變訊號。
使用者可以向 DATACONVERTERPRO-SW 提供自訂模式,以載入到 TI DAC。支援從 (...)
TIDA-010230 — 適用雷達和 EW 應用的多通道射頻收發器、低雜訊時脈參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| FCBGA (ALK) | 400 | Ultra Librarian |
| FCBGA (ABJ) | 400 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。