首頁 數據轉換器 類比轉數位轉換器 (ADC) 高速 ADC (≥10 MSPS)
首頁
數據轉換器
類比轉數位轉換器 (ADC)
高速 ADC (≥10 MSPS)

ADS54J42

現行

雙通道、14 位元、625-MSPS 類比轉數位轉換器 (ADC)

立即訂購
產品規格表

ADS54J42

現行
產品規格表 立即訂購

產品詳細資料

Sample rate (max) (Msps) 625 Resolution (Bits) 14 Number of input channels 2 Interface type JESD204B Analog input BW (MHz) 1200 Features High Performance Rating Catalog Peak-to-peak input voltage range (V) 1.9 Power consumption (typ) (mW) 1940 Architecture Pipeline SNR (dB) 71.8 ENOB (Bits) 11.6 SFDR (dB) 93 Operating temperature range (°C) -40 to 85 Input buffer Yes
Sample rate (max) (Msps) 625 Resolution (Bits) 14 Number of input channels 2 Interface type JESD204B Analog input BW (MHz) 1200 Features High Performance Rating Catalog Peak-to-peak input voltage range (V) 1.9 Power consumption (typ) (mW) 1940 Architecture Pipeline SNR (dB) 71.8 ENOB (Bits) 11.6 SFDR (dB) 93 Operating temperature range (°C) -40 to 85 Input buffer Yes
VQFNP (RMP) 72 100 mm² 10 x 10
  • 14-Bit Resolution, Dual-Chanel, 625-MSPS ADC
  • Noise Floor: –157 dBFS/Hz
  • Spectral Performance (fIN = 170 MHz at –1 dBFS):
    • SNR: 71.0 dBFS
    • NSD: –155.9 dBFS/Hz
    • SFDR: 85 dBc
    • SFDR: 93 dBc (Except HD2, HD3, and Interleaving Tones)
  • Spectral Performance (fIN = 350 MHz at –1 dBFS):
    • SNR: 69 dBFS
    • NSD: –153.9 dBFS/Hz
    • SFDR: 76 dBc
    • SFDR: 90 dBc (Except HD2, HD3, and Interleaving Tones)
  • Channel Isolation: 100 dBc at fIN = 170 MHz
  • Input Full-Scale: 1.9 VPP
  • Input Bandwidth (3 dB): 1.2 GHz
  • On-Chip Dither
  • Integrated Wideband DDC Block
  • JESD204B Interface with Subclass 1 Support:
    • 2 Lanes per ADC at 6.25 Gbps
    • 4 Lanes per ADC at 3.125 Gbps
    • Support for Multi-Chip Synchronization
  • Power Dissipation: 970 mW/Ch at 625 MSPS
  • Package: 72-Pin VQFNP (10 mm × 10 mm)
  • 14-Bit Resolution, Dual-Chanel, 625-MSPS ADC
  • Noise Floor: –157 dBFS/Hz
  • Spectral Performance (fIN = 170 MHz at –1 dBFS):
    • SNR: 71.0 dBFS
    • NSD: –155.9 dBFS/Hz
    • SFDR: 85 dBc
    • SFDR: 93 dBc (Except HD2, HD3, and Interleaving Tones)
  • Spectral Performance (fIN = 350 MHz at –1 dBFS):
    • SNR: 69 dBFS
    • NSD: –153.9 dBFS/Hz
    • SFDR: 76 dBc
    • SFDR: 90 dBc (Except HD2, HD3, and Interleaving Tones)
  • Channel Isolation: 100 dBc at fIN = 170 MHz
  • Input Full-Scale: 1.9 VPP
  • Input Bandwidth (3 dB): 1.2 GHz
  • On-Chip Dither
  • Integrated Wideband DDC Block
  • JESD204B Interface with Subclass 1 Support:
    • 2 Lanes per ADC at 6.25 Gbps
    • 4 Lanes per ADC at 3.125 Gbps
    • Support for Multi-Chip Synchronization
  • Power Dissipation: 970 mW/Ch at 625 MSPS
  • Package: 72-Pin VQFNP (10 mm × 10 mm)

The ADS54J42 is a low-power, wide-bandwidth, 14-bit, 625-MSPS, dual-channel, analog-to-digital converter (ADC). Designed for high signal-to-noise ratio (SNR), the device delivers a noise floor of –157 dBFS/Hz for applications aiming for highest dynamic range over a wide instantaneous bandwidth. The device supports the JESD204B serial interface with data rates up to 6.25 Gbps. The buffered analog input provides uniform input impedance across a wide frequency range and minimizes sample-and-hold glitch energy. Each ADC channel optionally can be connected to a wideband digital down-converter (DDC) block. The ADS54J42 provides excellent spurious-free dynamic range (SFDR) over a large input frequency range with very low power consumption.

The JESD204B interface reduces the number of interface lines, allowing high system integration density. An internal phase-locked loop (PLL) multiplies the ADC sampling clock to derive the bit clock that is used to serialize the 14-bit data from each channel.

The ADS54J42 is a low-power, wide-bandwidth, 14-bit, 625-MSPS, dual-channel, analog-to-digital converter (ADC). Designed for high signal-to-noise ratio (SNR), the device delivers a noise floor of –157 dBFS/Hz for applications aiming for highest dynamic range over a wide instantaneous bandwidth. The device supports the JESD204B serial interface with data rates up to 6.25 Gbps. The buffered analog input provides uniform input impedance across a wide frequency range and minimizes sample-and-hold glitch energy. Each ADC channel optionally can be connected to a wideband digital down-converter (DDC) block. The ADS54J42 provides excellent spurious-free dynamic range (SFDR) over a large input frequency range with very low power consumption.

The JESD204B interface reduces the number of interface lines, allowing high system integration density. An internal phase-locked loop (PLL) multiplies the ADC sampling clock to derive the bit clock that is used to serialize the 14-bit data from each channel.
filter 尋找其它 高速 ADC (≥10 MSPS)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 日期
* Data sheet ADS54J42 Dual-Channel, 14-Bit, 625-MSPS, Analog-to-Digital Converter datasheet (Rev. A) PDF | HTML 2016年 3月 31日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

韌體

TI204C-IP — Request for JESD204 rapid design IP

The JESD204 rapid design IP has been designed to enable FPGA engineers to achieve an accelerated path to a working JESD204 system. The IP has been architected in a way that downstream digital processing and other application logic are isolated from most of the performance- and timing-critical (...)

支援產品和硬體

支援產品和硬體
要求
開發模組 (EVM) 的 GUI

DATACONVERTERPRO-SW — High Speed Data Converter Pro GUI Installer, v5.31

This high-speed data converter pro GUI is a PC (Windows® XP/7/10 compatible) program designed to aid in evaluation of most TI high-speed data converter [analog-to-digital converter (ADC) and digital-to-analog converter (DAC)] and analog front-end (AFE) platforms. Designed to support the entire (...)

支援產品和硬體

支援產品和硬體
下載
模擬型號

ADS54J42 IBIS Model

SBAM263.ZIP (46 KB) - IBIS Model
下載
模擬型號

ADS54J42 IBIS-AMI Model

SBAM323.ZIP (6613 KB) - IBIS-AMI Model
下載
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFNP (RMP) 72 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片