IWRL6432WMOD
Módulo de radar mmWave para detección de movimiento y presencia
IWRL6432WMOD
- Ease of Use
- Integrated IWRL6432W mmWave sensor
- Small module size: 31mm x 15mm
- Quad Flat Module (QFM) - 4 x 9 LGA Grid
- Easy to mount 30-pad Land Grid Array (LGA)
- Easy to integrate - 18 signals interface
- Simple Configurable APIs (via SPI) to configure Range, Motion Sensitivity, Update rate via external MCU
- Motion and Presence detection indication via GPIO
- Integrated 3 receive channels and 2 transmit antennas etched on PCB
- Integrated power distribution network
- Integrated 40MHz XTAL
- FMCW Transceiver
- On-chip integrated PLL, transmitter, receiver, baseband and ADC
- Frequency Modulated Continuous Wave operation
- 5MHz IF bandwidth, real-only Rx channels
- Ultra-accurate chirp engine based on fractional-N PLL
- Antenna
- Field of View (FoV): ± 60° (Azimuth); ± 60° (Elevation)
- 57GHz - 61.5GHz antenna coverage with 4.5GHz continuous bandwidth
- Certifications
- Targeted modular certification with FCC, RED, TELEC certifications
- Performance
- Human Presence Detection Range typically up to:
- At 0°: 15m
- At edge of FoV: 8m
- Built-in low power modes for power saving
- Human Presence Detection Range typically up to:
- Power management
- 3.3V VCC and VIO operation
- Built-in 1.8V regulator on module
- Built-in on-chip LDO network for enhanced PSRR
- BOM-Optimized mode
- Host Interface
- SPI
- Host PC interface using TI mmWave uDFP
- Interfaces with external MCU
- SPI
- Other interfaces
- Presence Indication
- Wake Up Request
- Temperature operating range
- Industrial grade temperature range: –40°C to 85°C
Texas Instruments introduces the IWRL6432WMOD, the radar module presenting a significant advancement in low-power industrial radar technology. This compact 31mm × 15mm module integrates a 60GHz patch antenna, on-board power management, flash memory, passives and crystal, eliminating the need for specialized mmWave system design expertise while providing simple software configuration options for range, sensitivity, and regions of interest. The module is distinguished by its comprehensive targeted certification with FCC, RED, TELEC that eliminates cost and effort for certification at the end product. Additionally the module provides either SPI based point cloud data outputs or GPIO based presence indication which aids flexible implementation. By addressing customer readiness challenges and enabling autonomous operation across applications such as motion sensing, occupancy detection, and smart home devices, this TI-designed, supported, and distributed device significantly reduces development complexity and accelerates time-to-market for customers seeking to embed mmWave radar sensor capabilities in their products.
Documentación técnica
| Documentación principal | Tipo | Título | Opciones de formato | Fecha |
|---|---|---|---|---|
| * | Data sheet | IWRL6432WMOD mmWave Radar Module For Motion and Presence Detection datasheet | PDF | HTML | 01 dic 2025 |
Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
BP-IWRL6432WMOD — Placa de evaluación IWRL6432WMOD
La BP-IWRL6432WMOD de Texas Instruments es una placa de evaluación basada en FR4, fácil de usar y de bajo costo, para el módulo sensor integrado IWRL6432W de 60 GHz mmWave. Este módulo de evaluación (EVM) contiene todo lo necesario para evaluar y comenzar a desarrollar software para el módulo de (...)
MMWAVE-UDFP-APPSW — uDFP Package for Low Power mmWave Radar Modules and Front End Device
The mmWave low-power software development kit (SDK) is a collection of software packages that enable application evaluation and development on our low-power mmWave sensors. This tool includes MMWAVE-L-SDK and MMWAVE-L-SDK-6 companion packages to support customer design needs.
MMWAVE-L-SDK and (...)
Productos y hardware compatibles
MMWAVE-SENSING-ESTIMATOR-CLOUD — mmWave sensing estimator cloud development on TI Resource Explorer
Productos y hardware compatibles
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
Productos y hardware compatibles
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development tool ecosystem. It is an integrated development environment (IDE) for TI's microcontrollers, processors, wireless connectivity devices and radar sensors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize (...)
Productos y hardware compatibles
EDGE-AI-STUDIO — Edge AI Studio
Edge AI Studio is part of the CCStudio™ development tool ecosystem. Edge AI Studio is a collection of graphical and command line tools designed to accelerate edge AI development on TI processors, microcontrollers, connectivity devices and radar sensors. It supports both AI-accelerated (...)
Productos y hardware compatibles
EDGE-AI-STUDIO-MCU — Edge AI Studio for Microcontrollers
Edge AI Studio is part of the CCStudio™ development tool ecosystem. Edge AI Studio is a collection of graphical and command line tools designed to accelerate edge AI development on TI processors, microcontrollers, connectivity devices and radar sensors. It supports both AI-accelerated (...)
Productos y hardware compatibles
RADAR-ACADEMY — mmWave Radar Academy
Productos y hardware compatibles
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
Productos y hardware compatibles
RADAR-TOOLBOX — Radar evaluation and development support package with example projects, documentation and tools
Productos y hardware compatibles
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| QFM (MBB) | 30 | Ultra Librarian |
Pedidos y calidad
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
- Lugar de fabricación
- Lugar de ensamblaje
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI.