TMS320F28033

ACTIVO

MCU C2000™ de 32 bits para automoción con 60 MHz, Flash de 64 KB, ADC de 4.6 MSPS y CLA

Detalles del producto

CPU 1 C28 Frequency (MHz) 60 Flash memory (kByte) 64 RAM (kByte) 20 ADC type 1 12-bit SAR Total processing (MIPS) 120 Features 32-bit CPU timers, Single zone code security, Watchdog timer UART 1 CAN (#) 1 Sigma-delta filter 0 PWM (Ch) 8, 12, 14 TI functional safety category Functional Safety Quality-Managed Number of ADC channels 13, 14, 16 Direct memory access (Ch) 0 SPI 1, 2 QEP 1 USB No Hardware accelerators Control law accelerator Edge AI enabled Yes Operating temperature range (°C) -40 to 125 Rating Catalog Communication interface CAN, I2C, SPI, UART Operating system FreeRTOS Nonvolatile memory (kByte) 64 Number of GPIOs 45 Number of I2Cs 1 Security Secure storage
CPU 1 C28 Frequency (MHz) 60 Flash memory (kByte) 64 RAM (kByte) 20 ADC type 1 12-bit SAR Total processing (MIPS) 120 Features 32-bit CPU timers, Single zone code security, Watchdog timer UART 1 CAN (#) 1 Sigma-delta filter 0 PWM (Ch) 8, 12, 14 TI functional safety category Functional Safety Quality-Managed Number of ADC channels 13, 14, 16 Direct memory access (Ch) 0 SPI 1, 2 QEP 1 USB No Hardware accelerators Control law accelerator Edge AI enabled Yes Operating temperature range (°C) -40 to 125 Rating Catalog Communication interface CAN, I2C, SPI, UART Operating system FreeRTOS Nonvolatile memory (kByte) 64 Number of GPIOs 45 Number of I2Cs 1 Security Secure storage
LQFP (PN) 80 196 mm² 14 x 14 TQFP (PAG) 64 144 mm² 12 x 12 VQFN (RSH) 56 49 mm² 7 x 7
  • High-efficiency 32-bit CPU (TMS320C28x)
    • 60MHz (16.67ns cycle time)
    • 16 × 16 and 32 × 32 MAC operations
    • 16 × 16 dual MAC
    • Harvard bus architecture
    • Atomic operations
    • Fast interrupt response and processing
    • Unified memory programming model
    • Code-efficient (in C/C++ and Assembly)
  • Programmable Control Law Accelerator (CLA)
    • 32-bit floating-point math accelerator
    • Executes code independently of the main CPU
  • Endianness: Little endian
  • JTAG boundary scan support
    • IEEE Standard 1149.1-1990 Standard Test Access Port and Boundary Scan Architecture
  • Low cost for both device and system:
    • Single 3.3V supply
    • No power sequencing requirement
    • Integrated power-on reset and brown-out reset
    • Low power
    • No analog support pins
  • Clocking:
    • Two internal zero-pin oscillators
    • On-chip crystal oscillator and external clock input
    • Watchdog timer module
    • Missing clock detection circuitry
  • Up to 45 individually programmable, multiplexed GPIO pins with input filtering
  • Peripheral Interrupt Expansion (PIE) block that supports all peripheral interrupts
  • Three 32-bit CPU timers
  • Independent 16-bit timer in each Enhanced Pulse Width Modulator (ePWM)
  • On-chip memory
    • Flash, SARAM, OTP, Boot ROM available
  • Code-security module
  • 128-bit security key and lock
    • Protects secure memory blocks
    • Prevents firmware reverse engineering
  • Serial port peripherals
    • One Serial Communications Interface (SCI) Universal Asynchronous Receiver/Transmitter (UART) module
    • Two Serial Peripheral Interface (SPI) modules
    • One Inter-Integrated-Circuit (I2C) module
    • One Local Interconnect Network (LIN) module
    • One Enhanced Controller Area Network (eCAN) module
  • Enhanced control peripherals
    • ePWM
    • High-Resolution PWM (HRPWM)
    • Enhanced Capture (eCAP) module
    • High-Resolution Input Capture (HRCAP) module
    • Enhanced Quadrature Encoder Pulse (eQEP) module
    • Analog-to-Digital Converter (ADC)
    • On-chip temperature sensor
    • Comparator
  • Advanced emulation features
    • Analysis and breakpoint functions
    • Real-time debug through hardware
  • Package options
    • 56-Pin RSH Very Thin Quad Flatpack (No lead) (VQFN)
    • 64-Pin PAG Thin Quad Flatpack (TQFP)
    • 80-Pin PN Low-Profile Quad Flatpack (LQFP)
  • Temperature options
    • T: –40°C to 105°C
    • S: –40°C to 125°C
    • Q: –40°C to 125°C (AEC Q100 qualification for automotive applications)
  • High-efficiency 32-bit CPU (TMS320C28x)
    • 60MHz (16.67ns cycle time)
    • 16 × 16 and 32 × 32 MAC operations
    • 16 × 16 dual MAC
    • Harvard bus architecture
    • Atomic operations
    • Fast interrupt response and processing
    • Unified memory programming model
    • Code-efficient (in C/C++ and Assembly)
  • Programmable Control Law Accelerator (CLA)
    • 32-bit floating-point math accelerator
    • Executes code independently of the main CPU
  • Endianness: Little endian
  • JTAG boundary scan support
    • IEEE Standard 1149.1-1990 Standard Test Access Port and Boundary Scan Architecture
  • Low cost for both device and system:
    • Single 3.3V supply
    • No power sequencing requirement
    • Integrated power-on reset and brown-out reset
    • Low power
    • No analog support pins
  • Clocking:
    • Two internal zero-pin oscillators
    • On-chip crystal oscillator and external clock input
    • Watchdog timer module
    • Missing clock detection circuitry
  • Up to 45 individually programmable, multiplexed GPIO pins with input filtering
  • Peripheral Interrupt Expansion (PIE) block that supports all peripheral interrupts
  • Three 32-bit CPU timers
  • Independent 16-bit timer in each Enhanced Pulse Width Modulator (ePWM)
  • On-chip memory
    • Flash, SARAM, OTP, Boot ROM available
  • Code-security module
  • 128-bit security key and lock
    • Protects secure memory blocks
    • Prevents firmware reverse engineering
  • Serial port peripherals
    • One Serial Communications Interface (SCI) Universal Asynchronous Receiver/Transmitter (UART) module
    • Two Serial Peripheral Interface (SPI) modules
    • One Inter-Integrated-Circuit (I2C) module
    • One Local Interconnect Network (LIN) module
    • One Enhanced Controller Area Network (eCAN) module
  • Enhanced control peripherals
    • ePWM
    • High-Resolution PWM (HRPWM)
    • Enhanced Capture (eCAP) module
    • High-Resolution Input Capture (HRCAP) module
    • Enhanced Quadrature Encoder Pulse (eQEP) module
    • Analog-to-Digital Converter (ADC)
    • On-chip temperature sensor
    • Comparator
  • Advanced emulation features
    • Analysis and breakpoint functions
    • Real-time debug through hardware
  • Package options
    • 56-Pin RSH Very Thin Quad Flatpack (No lead) (VQFN)
    • 64-Pin PAG Thin Quad Flatpack (TQFP)
    • 80-Pin PN Low-Profile Quad Flatpack (LQFP)
  • Temperature options
    • T: –40°C to 105°C
    • S: –40°C to 125°C
    • Q: –40°C to 125°C (AEC Q100 qualification for automotive applications)

C2000™ 32-bit microcontrollers are optimized for processing, sensing, and actuation to improve closed-loop performance in real-time control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; motor control; and sensing and signal processing. The C2000 line includes the Premium performance MCUs and the Entry performance MCUs.

The F2803x family of microcontrollers provides the power of the C28x core and Control Law Accelerator (CLA) coupled with highly integrated control peripherals in low pin-count devices. This family is code-compatible with previous C28x-based code, and also provides a high level of analog integration.

An internal voltage regulator allows for single-rail operation. Enhancements have been made to the HRPWM to allow for dual-edge control (frequency modulation). Analog comparators with internal 10-bit references have been added and can be routed directly to control the PWM outputs. The ADC converts from 0 to 3.3V fixed full-scale range and supports ratio-metric VREFHI/VREFLO references. The ADC interface has been optimized for low overhead and latency.

To learn more about the C2000 MCUs, visit the C2000™ real-time control MCUs page.

C2000™ 32-bit microcontrollers are optimized for processing, sensing, and actuation to improve closed-loop performance in real-time control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; motor control; and sensing and signal processing. The C2000 line includes the Premium performance MCUs and the Entry performance MCUs.

The F2803x family of microcontrollers provides the power of the C28x core and Control Law Accelerator (CLA) coupled with highly integrated control peripherals in low pin-count devices. This family is code-compatible with previous C28x-based code, and also provides a high level of analog integration.

An internal voltage regulator allows for single-rail operation. Enhancements have been made to the HRPWM to allow for dual-edge control (frequency modulation). Analog comparators with internal 10-bit references have been added and can be routed directly to control the PWM outputs. The ADC converts from 0 to 3.3V fixed full-scale range and supports ratio-metric VREFHI/VREFLO references. The ADC interface has been optimized for low overhead and latency.

To learn more about the C2000 MCUs, visit the C2000™ real-time control MCUs page.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TMS320F280049 ACTIVO MCU C2000™ de 32 bits con 100 MHz, FPU, TMU, Flash de 256 KB, CLA, PGA y SDFM This product is from the latest generation of real-time controllers with similar attributes.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 64
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet TMS320F2803x Real-Time Microcontrollers datasheet (Rev. Q) PDF | HTML 31 ene 2024
* Errata TMS320F2803x Piccolo™ MCUs Silicon Errata (Rev. Q) PDF | HTML 08 ene 2019
* User guide TMS320F2803x Microcontrollers Technical Reference Manual (Rev. A) 03 jun 2022
Technical article How to improve the power factor of a PFC PDF | HTML 02 sep 2025
Application note Serial Flash Programming of C2000 Microcontrollers (Rev. I) PDF | HTML 14 ago 2025
User guide Migration Between TMS320F2802x, TMS320F2803x and F28E12x Guide PDF | HTML 06 ago 2025
User guide C2000 Real-Time Control Peripheral Reference Guide (Rev. U) PDF | HTML 11 jul 2025
Product overview Safety Package for Automotive and Industrial Real-Time Microcontrollers (Rev. E) PDF | HTML 23 jun 2025
Application note C2000™ MCU JTAG Connectivity Debug (Rev. C) PDF | HTML 12 ago 2024
Application note Development Tool Versions for C2000™ Support (Rev. A) PDF | HTML 26 jun 2024
Application note Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 25 mar 2024
Technical article For efficiencies’ sake – how to integrate bidirectional power flow into your UPS design (part 1) PDF | HTML 11 ene 2024
Product overview C2000™ Safety Mechanisms (Rev. B) 09 nov 2023
Application note Migrating Software From 8-Bit (Byte) Addressable CPU’s to C28x CPU (Rev. A) PDF | HTML 19 abr 2023
Application note Software Examples to Showcase Unique Capabilities of TI’s C2000™ CLA (Rev. A) PDF | HTML 17 nov 2022
Application note Enhancing the Computational Performance of the C2000™ Microcontroller Family (Rev. C) PDF | HTML 14 dic 2021
Application note C2000™ Unique Device Number (Rev. B) PDF | HTML 17 sep 2020
Application note EEPROM Emulation for Gen 2 C2000 Real-Time MCUs (Rev. A) 23 jul 2020
White paper Taking charge of electric vehicles – both in the vehicle and on the grid (Rev. A) 17 jun 2020
User guide SYS/BIOS (TI-RTOS Kernel) User's Guide (Rev. V) 01 jun 2020
Application note Migrating From TMS320F2802x/2803x to TMS320F2806x (Rev. A) 17 mar 2020
Application note TMS320F2802x/TMS320F2803x to TMS320F28002x Migration Overview 13 ene 2020
Application note Configurable Error Generator for Controller Area Network PDF | HTML 19 dic 2019
Application note C2000 ADC (Type-3) Performance Versus ACQPS PDF | HTML 07 oct 2019
Application note Calculating Useful Lifetimes of Embedded Processors (Rev. B) PDF | HTML 07 may 2019
Functional safety information C2000™ MCU SafeTI™ control solutions: An introduction to ASIL decomposition 10 abr 2019
Application note MSL Ratings and Reflow Profiles (Rev. A) 13 dic 2018
White paper Exploring the evolution and optimization of wireless power transfer 27 jul 2018
Certificate Certificate of Compliance 06 jul 2018
Certificate Certificate of Compliance E352502-20130316 06 jul 2018
Functional safety information IEC60730 Safety Library for TMS320F2802x 06 jul 2018
Functional safety information IEC60730 Safety Library for TMS320F2803x 06 jul 2018
Functional safety information VDE Safety Certification Document 22 jun 2018
Application note The TMS320F28004x MCU: A Comparison to the TMS320F2806x and TMS320F2803x MCUs (Rev. A) 17 ene 2018
Technical article For efficiencies’ sake – how to integrate bidirectional power flow (part 2) PDF | HTML 19 sep 2017
Application note Programming Examples for the TMS320x28xx eCAN (Rev. B) PDF | HTML 12 sep 2017
Application note Calculator for CAN Bit Timing Parameters PDF | HTML 22 mar 2016
More literature 2-Phased Interleaved PFC (ILPFC) EVM Specification Quick Start Guide 09 feb 2016
Application note Sensorless Trapezoidal Control of BLDC Motors (Rev. A) 14 sep 2015
Application note Migrating from TMS320F280x to TMS320F2802x/TMS320F2803x (Rev. C) 11 ago 2015
Application note Using the CAN Piccolo Bootloader at High Temperature 29 jun 2015
User guide TMS320C28x DSP CPU and Instruction Set (Rev. F) 10 abr 2015
Application note Calculating FIT for a Mission Profile 24 mar 2015
More literature controlSUITE Getting Started Guide (Rev. C) 09 feb 2015
Application note Sensorless Field Oriented Control of 3-Phase Induction Motors 29 oct 2013
Application note Sensorless Field Oriented Control of 3-Phase Induction Motors Using CLA 29 oct 2013
Application note LED Lighting & DC/DC Conversion Control Integrated on One C2000 Microcontroller 17 sep 2013
Functional safety information Safety Manual for C2000 MCUs in IEC60730 Safety Applications (Rev. A) 21 ago 2013
Application note Digital Control of Two Phase Interleaved PFC and Motor Drive Using MCU With CLA 01 jul 2013
Application note Scalar (V/f) Control of 3-Phase Induction Motors 01 jul 2013
Application note Sensored Field Oriented Control of 3-Phase Induction Motors 01 jul 2013
Application note Sensored Field Oriented Control of 3-Phase Permanent Magnet Synchronous Motors 01 jul 2013
Application note Sensorless Field Oriented Control:3-Phase Perm.Magnet Synch. Motors With CLA 01 jul 2013
Application note Sensorless Field Oriented Ctrl of 3-Phase Perm. Magnet Synch. Motors-HVDMC Kit 01 jul 2013
Application note Trapezoidal Control of BLDC Motors Using Hall Effect Sensors 01 jul 2013
Application note PSFB Control Using C2000 Microcontrollers 22 may 2013
White paper Developing a multi-channel wireless inductive charger 24 ago 2012
White paper Implementing Arc Detection in Solar Applications 03 ago 2012
Application note Digitally Controlled HV Solar MPPT DC-DC Converter Using C2000 Piccolo MCU 29 may 2012
Application note Digital Peak Current Mode Control With Slope Compensation Using the TMS320F2803x (Rev. A) 17 abr 2012
Application note InstaSPIN(tm) BLDC Lab 15 nov 2011
Application note Software Implementation of PMBus over I2C for TMS320F2803x 14 mar 2011
Application note Oscillator Compensation Guide (Rev. A) 18 jun 2010
Application note Programming External Nonvolatile Memory Using SDFlash for TMS320C28x Devices 16 nov 2009

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TMDSDOCK28035 — Kit experimental F28035 Piccolo

TMDSDOCK28035 is a DIMM100 controlCARD based evaluation and development tool for the Piccolo F2803x series. The Docking Station provides power and JTAG debug for the controlCARD. Key device signals are accessible through header pins. Perforated areas on the baseboard are included for prototyping.

Placa de evaluación

TMDSHVBLPFCKIT — Kit de desarrollo PFC sin puente HV

CAUTION: This equipment operates at high voltages and currents which can result in hazardous electrical shock. Please make sure you understand and follow all necessary safety precautions prior to purchasing and operating.

TMDSHVBLPFCKIT is a DIMM100 controlCARD based motherboard evaluation module (...)

Placa de evaluación

XDS110ISO-EVM — Módulo de evaluación de complemento aislado XDS110 para los controlSOM de C2000 y Sitara™

La placa de complemento aislada XDS110 es un módulo de evaluación de depuración y programación flash en tiempo real para los controlSOM de C2000 y Sitara. Se puede conectar a los controlSOM de C2000 y Sitara a través de un conector no aislado de 120 pines o a través de un conector de 16 pines (...)
Guía del usuario: PDF | HTML
Placa de evaluación

ALGO-3P-UISP1-TI — Programador Algocraft μISP1 para dispositivos Texas Instruments

μISP puede funcionar conectado a un PC host (conexiones RS-232, USB y LAN integradas) o en modo independiente.

La ejecución del ciclo de programación en modo independiente puede ocurrir simplemente pulsando el botón de START o a través de algunas líneas de control TTL.

Su tamaño compacto y (...)

Desde: Algocraft
Tarjeta secundaria

TMDSCNCD28035 — Piccolo controlCARD F28035

TMDSCNCD28035 is a DIMM100 controlCARD based evaluation and development tool for the F2803x series. controlCARDs are complete board-level modules that utilize one of two standard form factors (100-pin DIMM or 180-pin HSEC) to provide a low-profile single-board controller solution.

For first (...)

Tarjeta secundaria

TMDSCNCD28035ISO — controlCARD aislada Piccolo TMS320F28035

TMDSCNCD28035ISO is a DIMM100 controlCARD based evaluation and development tool for the F2803x series. controlCARDs are complete board-level modules that utilize one of two standard form factors (100-pin DIMM or 180-pin HSEC) to provide a low-profile single-board controller solution.

For first (...)

Sonda de depuración

TMDSEMU200-U — Sonda de depuración XDS200 USB

El XDS200 es una sonda de depuración (emulador) que se utiliza para depurar dispositivos integrados de TI. Para la mayoría de los dispositivos, se recomienda utilizar el XDS110 (www.ti.com/tool/TMDSEMU110-U), que es más nuevo y de menor costo. El XDS200 es compatible con una amplia variedad de (...)

Sonda de depuración

TMDSEMU560V2STM-U — Sonda de depuración USB de seguimiento del sistema XDS560v2

The XDS560v2 is the highest performance of the XDS560™ family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7).  Note that it does not support serial wire debug (SWD).

All XDS debug probes support Core and System Trace in all ARM and DSP processors (...)

Sonda de depuración

TMDSEMU560V2STM-UE — Sonda de depuración USB y ethernet de seguimiento del sistema XDS560v2

The XDS560v2 is the highest performance of the XDS560™ family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7). Note that it does not support serial wire debug (SWD).

All XDS debug probes support Core and System Trace in all ARM and DSP processors (...)

Herramienta de programación de hardware

C2000-GANG — Programador C2000 Gang

De Elprotronics, Inc. - El programador C2000 Gang es un programador de dispositivo C2000 que puede programar hasta ocho dispositivos C2000 idénticos al mismo tiempo. El programador C2000 Gang se conecta a una PC host mediante una conexión RS-232 o USB estándar y proporciona opciones de programación (...)

Guía del usuario: PDF
Herramienta de programación de hardware

ALGO-3P-WRITENOW — Algocraft WriteNow! Programador

¡WriteNow! La serie de programadores en sistema supone un gran avance en el sector de la programación. Los programadores son compatibles con un gran número de dispositivos (microcontroladores, memorias, CPLD y otros dispositivos programables) de diversos fabricantes y tienen un tamaño compacto que (...)

Desde: Algocraft
Kit de desarrollo de software (SDK)

C2000WARE C2000Ware for C2000 Microcontrollers

C2000Ware is a cohesive set of software and documentation created to minimize development time. It includes device-specific drivers, libraries, and peripheral examples.

  • Hardware design schematics, BOM, gerber files, and documentation for C2000 controlCARDS, Experimenter Kits, and LaunchPads.
  • (...)
Productos y hardware compatibles

Productos y hardware compatibles

Examinar Opciones de descarga
Software de aplicación y estructura

INSTASPIN-BLDC — Solución InstaSPIN™-BLDC

In keeping with TI’s philosophy of making motor control more accessible and easier to use by design engineers, TI is proud to announce the release of its newest motor control technology, InstaSPIN-BLDC. Targeted at low cost BLDC applications, InstaSPIN-BLDC is a sensorless control technique based (...)
Controlador o biblioteca

C2000-DIGITAL-CONTROL-LIBRARY — Biblioteca de control digital para C2000

La biblioteca de control digital (DCL) C2000 proporciona un conjunto de funciones de software sólidas para desarrolladores de aplicaciones de control digital que utilizan la plataforma MCU C2000 de Texas Instruments. Todas las funciones de la biblioteca se suministran en forma de código fuente C o (...)
Controlador o biblioteca

CONTROLSUITE — Paquete de software control SUITE™: Herramientas de software y desarrollo para microcontroladores C2

controlSUITE™ para microcontroladores C2000™ es un conjunto cohesivo de infraestructura de software, herramientas y documentación diseñado para minimizar el tiempo de desarrollo del sistema. Desde conductores específicos de dispositivos y software de soporte hasta ejemplos completos en sofisticadas (...)
Controlador o biblioteca

IEC60730SWPACKAGES — Paquetes de software SafeTI™ 60730 C2000

The C2000 MCU SafeTI-60730 Software package includes UL-certified, as recognized components, SafeTI™ software packages that help make designing for functional safety consumer applications with C2000™ real-time control microcontrollers (MCUs) easier and faster. The software in these SafeTI software (...)
Controlador o biblioteca

SFRA — Herramienta de analizador de respuesta de frecuencia de software de fuente de alimentación digital p

The Software Frequency Response Analyzer (SFRA) is one of several tools included in the powerSUITE Digital Power Supply Design Software Tools for C2000™ Microcontrollers.  The SFRA includes a software library that enables developers to quickly measure the frequency response of their digital (...)
Guía del usuario: PDF | HTML
Primeros pasos

TI-DEVELOPER-ZONE Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
Productos y hardware compatibles

Productos y hardware compatibles

IDE, configuración, compilador o depurador

C2000_CLA_SAFETI_CQKIT_RV C2000™ and CLA safety compiler qualification kit (leverages compiler release validations)

The Safety Compiler Qualification Kit was developed to assist customers in qualifying their use of the TI ARM, C6000, C7000 or C2000/CLA C/C++ Compiler to functional safety standards such as IEC 61508 and ISO 26262.

The Safety Compiler Qualification Kit:

  • is free of charge for TI customers
  • does (...)
Productos y hardware compatibles

Productos y hardware compatibles

Opciones de descarga
IDE, configuración, compilador o depurador

CCSTUDIO Code Composer Studio™ integrated development environment (IDE)

Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.

(...)

Productos y hardware compatibles

Productos y hardware compatibles

Iniciar Opciones de descarga
IDE, configuración, compilador o depurador

SOLUTION_ADAPTER — Herramienta de adaptador de solución de fuente de alimentación digital powerSUITE para MCU C2000&tra

The Solution Adapter is one of several tools included in the powerSUITE Digital Power Supply Design Software Tools for C2000™ Microcontrollers.  The Solution Adapter allows you to modify existing code examples from TI digital power kits and configure them to run on a custom digital power (...)
Sistema operativo (SO)

WHIS-3P-SAFERTOS — RTOS de seguridad precertificado SAFERTOS de WITTENSTEIN

SAFERTOS® es un sistema operativo único en tiempo real diseñado para procesadores integrados. Está precertificado según las normas IEC 61508 SIL3 e ISO 26262 ASILD por TÜV SÜD. SAFERTOS® se diseñó específicamente para la seguridad por el equipo de expertos de WHIS y se usa globalmente en (...)
Herramienta de programación de software

UNIFLASH UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.

UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)

Productos y hardware compatibles

Productos y hardware compatibles

Iniciar Opciones de descarga
Modelo de simulación

F28030, F28031, F28032, F28033, F28034, F28035 PAG IBIS Model

SPRM396.ZIP (214 KB) - IBIS Model
Modelo de simulación

F28030, F28031, F28032, F28033, F28034, F28035 PN IBIS Model

SPRM397.ZIP (214 KB) - IBIS Model
Modelo de simulación

F28030, F28031, F28032, F28033, F28034, F28035 RSH BSDL Model

SPRM654.ZIP (3 KB) - BSDL Model
Modelo de simulación

F28030, F28031, F28032, F28033, F28034, F28035 RSH IBIS Model

SPRM738.ZIP (184 KB) - IBIS Model
Modelo de simulación

F28032, F28033, F28034, F28035 PAG BSDL Model

SPRM395.ZIP (3 KB) - BSDL Model
Modelo de simulación

F28032, F28033, F28034, F28035 PN BSDL Model

SPRM394.ZIP (3 KB) - BSDL Model
Herramienta de diseño

C2000-3P-SEARCH — Herramienta de búsqueda de terceros de C2000

TI has partnered with multiple companies to offer a wide range of solutions and services for TI C2000 devices. These companies can accelerate your path to production using C2000 devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your (...)
Diseños de referencia

TIDA-01281 — Diseño de referencia del módulo de comunicación para la transmisión funcional y aislada de datos RS-

El diseño de referencia TIDA-01281 es una solución de módulo de comunicación RS-485, I2C y CAN aislado de bajo costo y alta eficiencia diseñada para su uso en sistemas industriales como fuentes de alimentación ininterrumpidas (UPS) y bancos de almacenamiento de energía que requieren comunicación (...)
Design guide: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
LQFP (PN) 80 Ultra Librarian
TQFP (PAG) 64 Ultra Librarian
VQFN (RSH) 56 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos