Produktdetails

CPU 1 Arm Cortex-A53, 2 Arm Cortex-A53 Frequency (MHz) 1250 Display type 1 DSI, MIPI DPI Protocols Ethernet, TSN Hardware accelerators CPU only Features General purpose Operating system Linux Security Secure boot Rating Catalog Power supply solution TPS65214 Operating temperature range (°C) -40 to 125 Edge AI enabled Yes
CPU 1 Arm Cortex-A53, 2 Arm Cortex-A53 Frequency (MHz) 1250 Display type 1 DSI, MIPI DPI Protocols Ethernet, TSN Hardware accelerators CPU only Features General purpose Operating system Linux Security Secure boot Rating Catalog Power supply solution TPS65214 Operating temperature range (°C) -40 to 125 Edge AI enabled Yes
FCCSP (ANB) 373 141.6 mm² (11.8 mm × 12 mm)

Processor Cores:

  • Dual 64-bit Arm Cortex-A53 microprocessor subsystem up to 1.25GHz
    • Dual-core Cortex-A53 with 256KB L2 Cache
    • Each A53 core has 32KB L1 DCache and 32KB L1 ICache

Memory Subsystem:

  • 160KB of Shared On-Chip SRAM (OCSRAM)
  • DDR Subsystem (DDRSS)
    • Supports LPDDR4, DDR4 memory types
    • 16-bit data bus
    • Supports speeds up to 1600MT/s
    • Max DDR4 addressing range of 4GB
    • Max LPDDR4 addressing range of 2GB

Multimedia:

  • Display Subsystem
    • Single display support
    • Up to 1920x1080 @ 60fps
    • Supported with independent PLL
    • MIPI DSI (4 lanes DPHY) or DPI (24-bit RGB LVCMOS)

Security:

  • Secure boot supported
    • Hardware-enforced Root-of-Trust (RoT)
    • Support to switch RoT via backup key
    • Support for takeover protection, IP protection, and anti-roll back protection
  • Trusted Execution Environment (TEE) supported
    • Arm TrustZone based TEE
    • Extensive firewall support for isolation
    • Secure watchdog/timer/IPC
    • Secure storage support
    • Replay Protected Memory Block (RPMB) support
  • Dedicated Security Controller and dedicated security DMA & IPC subsystem for isolated processing
  • Cryptographic acceleration supported
    • Session-aware cryptographic engine with ability to auto-switch key-material based on incoming data stream
    • Supports cryptographic cores
      • AES – 128-/192-/256-bit key sizes
      • SHA2 – 224-/256-/384-/512-bit key sizes
      • DRBG with true random number generator
      • PKA (Public Key Accelerator) to Assist in RSA/ECC processing for secure boot
  • Debugging security
    • Secure software controlled debug access
    • Security aware debugging

High Speed Interfaces:

  • Integrated Ethernet switch supporting (total 2 external ports)
    • RMII(10/100) or RGMII (10/100/1000)
    • IEEE1588 (Annex D, Annex E, Annex F with 802.1AS PTP)
    • Clause 45 MDIO PHY management
    • Priority based flow control
    • Packet Classifier based on ALE engine with 64 classifiers
    • Time sensitive networking (TSN) support
    • H/W interrupt Pacing
    • IP/UDP/TCP checksum offload in hardware
  • 2× USB 2.0 Dual-Role Device (DRD) Subsystems (USBSS)
    • Port configurable as USB host or USB device
    • USB device: High-speed (480Mbps), and Full-speed (12Mbps)
    • USB host: High-speed (480Mbps), Full-speed (12Mbps), and Low-speed (1.5Mbps)
    • xHCI 1.1 compatible

General Connectivity:

  • 8x Universal Asynchronous Receiver-Transmitters (UARTs)
    • All instances Support RTS and CTS Flow Control
    • Supports RS-485 external transceiver auto flow control
  • 4x Serial Peripheral Interface (SPI) controllers
  • 5x Inter-Integrated Circuit (I2C) ports
  • 3x Multichannel Audio Serial Ports (McASPs)
    • Transmit and Receive clocks up to 50MHz
    • Up to 4/6/16 Serial Data Pins across 3x McASPs with Independent TX and RX Clocks
    • Supports Time Division Multiplexing (TDM), Inter-IC Sound (I2S), and similar formats
    • Supports Digital Audio Interface Transmission (SPDIF, IEC60958-1, and AES-3 formats)
    • FIFO buffers for Transmit and Receive (256Bytes)
    • Support for audio reference output clock
  • 3x enhanced PWM modules (ePWM)
  • 3x enhanced Quadrature Encoder Pulse modules (eQEP)
  • 3x enhanced Capture modules (eCAP)
  • General-Purpose I/O (GPIO), most LVCMOS I/O can be configured as GPIO
    • 4 banks supported for dual-voltage (1.8V/3.3V) and the rest single-voltage (1.8V) LVCMOS I/O banks
  • 3x Controller Area Network (CAN) with optional CAN-FD support
    • Conforms with CAN Protocol 2.0 A, B, and ISO 11898-1
    • Full CAN-FD support (up to 64 data bytes)
    • Speed up to 8Mbps
  • 1x 12-bit Analog-to-Digital Converter (ADC)
    • 10 bits of effective resolution (ENOB ≅ 10)
    • Up to 2MSPS
    • 4x analog inputs (time-multiplexed)

Media and Data Storage:

  • 3x Multi-Media Card/Secure Digital (MMC/SD) interface
    • 1x 8-bit eMMC interface up to HS200 speed
    • 2x 4-bit SD/SDIO interface up to UHS-I
    • Compliant with eMMC 5.1, SD 3.01, and SDIO Version 3.0
  • 1× General-Purpose Memory Controller (GPMC) up to 133MHz
    • Flexible 8- and 16-Bit Synchronous or Asynchronous Memory Interfaces with up to four Chip Selects
    • Supports 16-bit Muxed Address/Data schemes (AD, AAD)
    • Uses BCH code to support 4-, 8-, or 16-bit ECC
    • Uses Hamming code to support 1-bit ECC
    • Error Locator Module (ELM)
  • OSPI/QSPI with DDR / SDR support
    • Support for Serial NAND and Serial NOR Flash devices
    • 4GBytes memory address support

Power Management:

  • Active power management features such as auto clock gating, power gating, and dynamic frequency scaling
  • Several low-power features supported
  • Low-Power Modes
    • RTC Only
    • RTC + IO + DDR
    • DeepSleep
    • Standby

Boot Options:

  • UART
  • OSPI/QSPI Flash
  • GPMC NAND Flash
  • SD Card
  • eMMC
  • USB (host) Mass storage
  • USB (device) boot from external host (DFU mode)

Technology / Package:

  • 16-nm Technology
  • 11.9mm × 11.9mm, 0.5mm VCA, 373-pin FCCSP BGA package (ANB)

Processor Cores:

  • Dual 64-bit Arm Cortex-A53 microprocessor subsystem up to 1.25GHz
    • Dual-core Cortex-A53 with 256KB L2 Cache
    • Each A53 core has 32KB L1 DCache and 32KB L1 ICache

Memory Subsystem:

  • 160KB of Shared On-Chip SRAM (OCSRAM)
  • DDR Subsystem (DDRSS)
    • Supports LPDDR4, DDR4 memory types
    • 16-bit data bus
    • Supports speeds up to 1600MT/s
    • Max DDR4 addressing range of 4GB
    • Max LPDDR4 addressing range of 2GB

Multimedia:

  • Display Subsystem
    • Single display support
    • Up to 1920x1080 @ 60fps
    • Supported with independent PLL
    • MIPI DSI (4 lanes DPHY) or DPI (24-bit RGB LVCMOS)

Security:

  • Secure boot supported
    • Hardware-enforced Root-of-Trust (RoT)
    • Support to switch RoT via backup key
    • Support for takeover protection, IP protection, and anti-roll back protection
  • Trusted Execution Environment (TEE) supported
    • Arm TrustZone based TEE
    • Extensive firewall support for isolation
    • Secure watchdog/timer/IPC
    • Secure storage support
    • Replay Protected Memory Block (RPMB) support
  • Dedicated Security Controller and dedicated security DMA & IPC subsystem for isolated processing
  • Cryptographic acceleration supported
    • Session-aware cryptographic engine with ability to auto-switch key-material based on incoming data stream
    • Supports cryptographic cores
      • AES – 128-/192-/256-bit key sizes
      • SHA2 – 224-/256-/384-/512-bit key sizes
      • DRBG with true random number generator
      • PKA (Public Key Accelerator) to Assist in RSA/ECC processing for secure boot
  • Debugging security
    • Secure software controlled debug access
    • Security aware debugging

High Speed Interfaces:

  • Integrated Ethernet switch supporting (total 2 external ports)
    • RMII(10/100) or RGMII (10/100/1000)
    • IEEE1588 (Annex D, Annex E, Annex F with 802.1AS PTP)
    • Clause 45 MDIO PHY management
    • Priority based flow control
    • Packet Classifier based on ALE engine with 64 classifiers
    • Time sensitive networking (TSN) support
    • H/W interrupt Pacing
    • IP/UDP/TCP checksum offload in hardware
  • 2× USB 2.0 Dual-Role Device (DRD) Subsystems (USBSS)
    • Port configurable as USB host or USB device
    • USB device: High-speed (480Mbps), and Full-speed (12Mbps)
    • USB host: High-speed (480Mbps), Full-speed (12Mbps), and Low-speed (1.5Mbps)
    • xHCI 1.1 compatible

General Connectivity:

  • 8x Universal Asynchronous Receiver-Transmitters (UARTs)
    • All instances Support RTS and CTS Flow Control
    • Supports RS-485 external transceiver auto flow control
  • 4x Serial Peripheral Interface (SPI) controllers
  • 5x Inter-Integrated Circuit (I2C) ports
  • 3x Multichannel Audio Serial Ports (McASPs)
    • Transmit and Receive clocks up to 50MHz
    • Up to 4/6/16 Serial Data Pins across 3x McASPs with Independent TX and RX Clocks
    • Supports Time Division Multiplexing (TDM), Inter-IC Sound (I2S), and similar formats
    • Supports Digital Audio Interface Transmission (SPDIF, IEC60958-1, and AES-3 formats)
    • FIFO buffers for Transmit and Receive (256Bytes)
    • Support for audio reference output clock
  • 3x enhanced PWM modules (ePWM)
  • 3x enhanced Quadrature Encoder Pulse modules (eQEP)
  • 3x enhanced Capture modules (eCAP)
  • General-Purpose I/O (GPIO), most LVCMOS I/O can be configured as GPIO
    • 4 banks supported for dual-voltage (1.8V/3.3V) and the rest single-voltage (1.8V) LVCMOS I/O banks
  • 3x Controller Area Network (CAN) with optional CAN-FD support
    • Conforms with CAN Protocol 2.0 A, B, and ISO 11898-1
    • Full CAN-FD support (up to 64 data bytes)
    • Speed up to 8Mbps
  • 1x 12-bit Analog-to-Digital Converter (ADC)
    • 10 bits of effective resolution (ENOB ≅ 10)
    • Up to 2MSPS
    • 4x analog inputs (time-multiplexed)

Media and Data Storage:

  • 3x Multi-Media Card/Secure Digital (MMC/SD) interface
    • 1x 8-bit eMMC interface up to HS200 speed
    • 2x 4-bit SD/SDIO interface up to UHS-I
    • Compliant with eMMC 5.1, SD 3.01, and SDIO Version 3.0
  • 1× General-Purpose Memory Controller (GPMC) up to 133MHz
    • Flexible 8- and 16-Bit Synchronous or Asynchronous Memory Interfaces with up to four Chip Selects
    • Supports 16-bit Muxed Address/Data schemes (AD, AAD)
    • Uses BCH code to support 4-, 8-, or 16-bit ECC
    • Uses Hamming code to support 1-bit ECC
    • Error Locator Module (ELM)
  • OSPI/QSPI with DDR / SDR support
    • Support for Serial NAND and Serial NOR Flash devices
    • 4GBytes memory address support

Power Management:

  • Active power management features such as auto clock gating, power gating, and dynamic frequency scaling
  • Several low-power features supported
  • Low-Power Modes
    • RTC Only
    • RTC + IO + DDR
    • DeepSleep
    • Standby

Boot Options:

  • UART
  • OSPI/QSPI Flash
  • GPMC NAND Flash
  • SD Card
  • eMMC
  • USB (host) Mass storage
  • USB (device) boot from external host (DFU mode)

Technology / Package:

  • 16-nm Technology
  • 11.9mm × 11.9mm, 0.5mm VCA, 373-pin FCCSP BGA package (ANB)

The low-cost & performance optimized AM62L family of application processors are built for Linux application development. With scalable Arm Cortex-A53 core performance and embedded features such as: Multimedia DSI/DPI support, integrated ADC on chip, advanced lower power management modes, and extensive security options for IP protection with the built-in security features.

The AM62Lx devices includes an extensive set of peripherals that make it a well-suited general-purpose device for a broad range of industrial applications while offering intelligent features and optimized power architecture as well. In addition, the extensive set of peripherals included in AM62Lx enables system-level connectivity, such as: USB, MMC/SD, OSPI, CAN-FD and an ADC.

The low-cost & performance optimized AM62L family of application processors are built for Linux application development. With scalable Arm Cortex-A53 core performance and embedded features such as: Multimedia DSI/DPI support, integrated ADC on chip, advanced lower power management modes, and extensive security options for IP protection with the built-in security features.

The AM62Lx devices includes an extensive set of peripherals that make it a well-suited general-purpose device for a broad range of industrial applications while offering intelligent features and optimized power architecture as well. In addition, the extensive set of peripherals included in AM62Lx enables system-level connectivity, such as: USB, MMC/SD, OSPI, CAN-FD and an ADC.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 34
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt AM62Lx Sitara™ Processors datasheet (Rev. B) PDF | HTML 30.11.2025
* Benutzerhandbuch AM62L Technical Reference Manual (Rev. A) PDF | HTML 30.09.2025
* Errata AM62Lx Sitara Processors Silicon Errata (Rev. B) PDF | HTML 07.10.2025
Anwendungshinweis Dynamic temperature detection and thermal management of TDA4x and AM6x PDF | HTML 16.07.2026
Application brief EV Charging Reference Designs Selection Guide PDF | HTML 29.06.2026
Anwendungshinweis MSPM0 – ADC Attach on AM62x and AM62L using SPI (Rev. B) PDF | HTML 17.06.2026
Anwendungshinweis Enable PipeWire on TI Sitara Devices PDF | HTML 08.06.2026
Anwendungshinweis Thermal Management of TDA4x and AM6x (Rev. A) PDF | HTML 12.05.2026
Benutzerhandbuch AM62L (AM62L32, AM62L31) Processor Family Schematic, Design Guidelines, Design Checklist, and Review Checklist (Rev. A) PDF | HTML 07.05.2026
Anwendungshinweis TI Sitara Processors Multi-Protocol Industrial Communication Designs PDF | HTML 15.04.2026
Anwendungshinweis How to Design Robust OTA Systems Using TI Processors PDF | HTML 02.04.2026
Anwendungshinweis Leverage AM62L Enables EV Charging Station PDF | HTML 24.03.2026
Anwendungshinweis Enhanced OSPI PHY Tuning Algorithm for Sitara Processors on MCU+ SDK PDF | HTML 13.03.2026
Anwendungshinweis Throughput Characterization of OSPI and QSPI Serial NOR/NAND Flash Operations on MCU+ SDK (Rev. A) PDF | HTML 17.02.2026
Anwendungshinweis Custom Board Design and Simulation Guidelines for Processor High Speed Parallel Interfaces (Rev. A) PDF | HTML 12.02.2026
Benutzerhandbuch Hardware Design Considerations for Custom Board Design Using AM62L (AM62L32, AM62L31) Family of Processors (Rev. B) PDF | HTML 27.01.2026
Anwendungshinweis Convert Sitara MPU HS-FS Silicon to HS-SE with No Boot Mode Switch PDF | HTML 05.12.2025
Benutzerhandbuch AM62L Power Visualizer User's Guide PDF | HTML 05.12.2025
Anwendungshinweis Enabling Matter on Sitara MPU (Rev. A) PDF | HTML 24.11.2025
Anwendungshinweis Getting Started with Sysconfig Tool PDF | HTML 21.11.2025
Anwendungshinweis AM62L Power Consumption Summary PDF | HTML 20.10.2025
Anwendungshinweis Sitara Processor Power Distribution Networks: Implementation and Analysis (Rev. H) PDF | HTML 17.10.2025
Anwendungshinweis AM62Lx Power Supply Implementation (Rev. B) PDF | HTML 10.10.2025
Anwendungshinweis AM625x/AM623x and AM62Lx Hardware Migration Guide PDF | HTML 06.10.2025
Anwendungshinweis AM62L Power Estimation Tool PDF | HTML 22.09.2025
Anwendungshinweis AM62x, AM62Ax, AM62Px, AM62Lx Spread-Spectrum Clocking PDF | HTML 08.09.2025
Anwendungshinweis Processors Tools Overview PDF | HTML 16.06.2025
Anwendungshinweis Sitara™AM62Lx Benchmarks PDF | HTML 10.03.2025
Anwendungshinweis AM62x, AM62Lx DDR Board Design and Layout Guidelines (Rev. C) PDF | HTML 05.03.2025
Application brief AM62L Maximum Current Ratings PDF | HTML 04.03.2025
Product overview AM62L - Low Power Cortex A53 SoC for Cost Optimized IOT, HMI, and General-Purpose Applications PDF | HTML 03.03.2025
Whitepaper Securing Arm-Based Application Processors (Rev. F) PDF | HTML 26.02.2025
Application brief Growing Need of Processing Technologies in Smart E - Meters PDF | HTML 21.02.2025
Anwendungshinweis AM62Lx Escape Routing Guidelines PDF | HTML 26.03.2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TMDS62LEVM — AM62L – Evaluierungsmodul

Das Evaluierungsmodul (EVM) TMDS62LEVM ist für die Produktfamilie der kostengünstigen und leistungsoptimierten Anwendungsprozessoren AM62L konzipiert. Der AM62L verfügt über skalierbare Arm® Cortex®-A53-Core-Leistung und Embedded-Funktionen wie: Multimedia-DSI-Unterstützung, integrierter ADC auf (...)
Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

BEACN-3P-AM62L-SOM — Evaluierungs- und Entwicklungskits für Beacon-EmbeddedWorks-AM62L-System-on-Module (SoM)

Das Evaluierungs- und Entwicklungskit für das Beacon EmbeddedWorks AM62L-System-on-Module (SoM) bietet eine produktfertige Hardware- und Software-Plattform zur Evaluierung der Funktionalität des AM62L-SoM. Diese umfassenden Evaluierungs- und Entwicklungskits enthalten ein vollständig integriertes (...)

Unterstützte Produkte und Hardware
Evaluierungsplatine

EZURI-3P-CARBONAM62L — Die Carbon AM62L OSM-SF-Familie wird betr. v. Texas Instruments AM62L-Prozessorfamilie, dem TI TP

Die CarbonAM62L OSM-SF-Familie wird betr. v. Texas Instruments AM62L-Prozessorfamilie, dem TPS652194 PMIC, Ezurios Sona™ TI351 WLAN 6- und Bluetooth-Drahtlosmodulen, LPDDR4 RAM und eMMC-Speicher.

 

Der CarbonAM62L wurde für skalierbare Leistung entwickelt und kombiniert ein (...)

Von: Ezurio
Unterstützte Produkte und Hardware
Evaluierungsplatine

FORLX-3P-AM62L-EVM — Forlinx AM62L-Evaluierungsmodul

The AM62L Evaluation Module, co‑engineered by Forlinx Embedded Technology and Texas Instruments, delivers a production‑grade, cost‑optimized platform for developers targeting AI‑enabled edge, vision, and industrial applications.

Leveraging Forlinx’s four‑layer PCB expertise and TI’s rigorous (...)

Unterstützte Produkte und Hardware
Evaluierungsplatine

IWAVE-3P-OSM-LF-AM62LX — iWave Global TI AM62Lx OSM Size-S System on Module

iWave’s iG-RainboW-G69M OSM Size-SF System on Module integrates the TI AM62Lx SoC featuring dual 64-bit Arm® Cortex®-A53 cores running up to 1.25GHz. Built on the OSM v1.2 standard with a compact 30mm x 30mm LGA form factor, it supports 1GB LPDDR4 (expandable to 2GB), 8GB eMMC (expandable), and (...)

Unterstützte Produkte und Hardware
Tochterkarte

AM62L-EVSE-DEV-EVM — AM62L EVSE-Evaluierungsmodul

Das AM62L-EVSE-DEV-EVM ist Teil der TI-EVSE-Entwicklungsplattform für AM62L und stellt einen universellen Laderegler für AC- und DC-Ladestationen mit Open-Source-Software-Stack dar. Die vollständige Plattform besteht aus drei separaten Teilen: AM62L-EVM (TMDS62LEVM), AM62L-EVSE-DEV-EVM und (...)

Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Tochterkarte

PHYTC-3P-PHYFLEX-AM62L — PHYTEC phyFLEX-AM62Lx-System-on-Module (SOM)

Das phyFLEX-AM62Lx ist ein kompaktes, energieeffizientes System-on-Module (SOM), das von PHYTEC entwickelt und auf dem Arm®-Cortex®-A53-AM62Lx-Prozessor basiert. Das SOM vereint DDR4-Speicher, eMMC, Ethernet PHY und einen MIPI-zu-LVDS-Wandler, um das Systemdesign zu vereinfachen und die (...)

Von: PHYTEC
Unterstützte Produkte und Hardware
Debug-Tastkopf

TMDSEMU200-U — XDS200-USB-Debug-Tastkopf

Der XDS200 ist ein Debug-Tastkopf (Emulator) zum Debugging von Embedded-Bausteinen von TI. Für die meisten Bausteine wird die Verwendung der neueren, kostengünstigeren XDS110 (www.ti.com/tool/TMDSEMU110-U) empfohlen. Der XDS200 unterstützt eine große Zahl von Standards (IEEE1149.1, IEEE1149.7, SWD) (...)

Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Debug-Tastkopf

LB-3P-TRACE32-ARM — Debug- und Trace-System Lauterbach TRACE32® für Arm®-basierte Mikrocontroller und Prozessoren

Die TRACE32®-Tools von Lauterbach sind eine Suite hochmoderner Hardware- und Softwarekomponenten, mit denen Entwickler alle Arten von Arm®-basierten Mikrocontrollern und Prozessoren analysieren, optimieren und zertifizieren können. Die weltweit anerkannten Debugging- und Trace-Lösungen für (...)

Unterstützte Produkte und Hardware
Software-Entwicklungskit (SDK)

AM62L-FREERTOS-SDK — FreeRTOS SDK for AM62L family of devices

Die Software Development Kits (SDKs) für AM62L-Prozessoren unter Linux® and TI FreeRTOS sind einheitliche Softwareplattformen für Embedded-Prozessoren von TI. Sie ermöglichen die einfache Einrichtung und den schnellen, direkten Zugriff auf Benchmarks und Demos.

Alle Versionen dieses SDKs lassen (...)

Unterstützte Produkte und Hardware
Software-Entwicklungskit (SDK)

AM62L-LINUX-RT-SDK — Linux RT SDK for AM62L family of devices

Die Software Development Kits (SDKs) für AM62L-Prozessoren unter Linux® and TI FreeRTOS sind einheitliche Softwareplattformen für Embedded-Prozessoren von TI. Sie ermöglichen die einfache Einrichtung und den schnellen, direkten Zugriff auf Benchmarks und Demos.

Alle Versionen dieses SDKs lassen (...)

Unterstützte Produkte und Hardware
Software-Entwicklungskit (SDK)

AM62L-LINUX-SDK — Linux SDK for AM62L family of devices

Die Software Development Kits (SDKs) für AM62L-Prozessoren unter Linux® and TI FreeRTOS sind einheitliche Softwareplattformen für Embedded-Prozessoren von TI. Sie ermöglichen die einfache Einrichtung und den schnellen, direkten Zugriff auf Benchmarks und Demos.

Alle Versionen dieses SDKs lassen (...)

Unterstützte Produkte und Hardware
IDE, Konfiguration, Compiler oder Debugger

CCSTUDIO — Code Composer Studio integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

Unterstützte Produkte und Hardware
IDE, Konfiguration, Compiler oder Debugger

CLOCKTREE-AM62L — Clock tree configuration for AM62L

The Clock Tree Tool (CTT) for Sitara™ ARM®, Automotive, and Digital Signal Processors is an interactive clock tree configuration software that provides information about the clocks and modules in these TI devices. It allows the user to:

  • Visualize the device clock tree
  • Interact with clock tree (...)
Unterstützte Produkte und Hardware
IDE, Konfiguration, Compiler oder Debugger

DDR-CONFIG-AM62L — DDR Configuration Tool

This SysConfig based tool simplifies the process of configuring the DDR Subsystem Controller and PHY to interface to SDRAM devices. Based on the memory device, board design, and topology the tool outputs files to initialize and train the selected memory.
Unterstützte Produkte und Hardware
IDE, Konfiguration, Compiler oder Debugger

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

Unterstützte Produkte und Hardware
Onlineschulungen

AM62L-ACADEMY — AM62Lx Academy

AM62Lx Academy is designed to simplify and accelerate custom AM62Lx development.
Unterstützte Produkte und Hardware
Erste Schritte

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
Unterstützte Produkte und Hardware
Betriebssystem (BS)

TRZN-3P-TORIZON-OS — Einsatzbereite Industrial Embedded-Linux-Verteilung Torizon OS

Torizon OS ist ein kostenloses, quelloffenes Industrial Embedded-Linux-Betriebssystem, das auf die Vereinfachung der Entwicklung und Wartung von Produkten ausgelegt ist, die hohe Zuverlässigkeit und Sicherheit erfordern. Neben anderen zentralen Funktionen bietet es eine optimale Containerlaufzeit (...)

Von: Torizon
Unterstützte Produkte und Hardware
Betriebssystem (BS)

WHIS-3P-SAFERTOS — WITTENSTEIN SAFERTOS Vorzertifiziertes Sicherheits-RTOS

SAFERTOS® ist ein einzigartiges Echtzeitbetriebssystem für Embedded-Prozessoren. Er ist vom TÜV SÜD nach den Normen IEC 61508 SIL3 und ISO 26262 ASILD vorzertifiziert. SAFERTOS® wurde vom Expertenteam von WHIS speziell auf Sicherheit ausgelegt und wird weltweit in sicherheitskritischen Anwendungen (...)

Unterstützte Produkte und Hardware
Simulationsmodell

AM62Lx ANB SR 1.1 BSDL Model

SPRM858.ZIP (8 KB) - BSDL-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

AM62Lx ANB SR 1.1 IBIS Model

SPRM861.ZIP (2037 KB) - IBIS-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

AM62Lx ANB SR 1.1 IBIS-AMI Model

SPRM868.ZIP (39973 KB) - IBIS-AMI-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

AM62Lx ANB SR 1.1 Thermal Model

SPRM859.ZIP (1 KB) - Wärmemodell
Unterstützte Produkte und Hardware
Berechnungstool

AM62L-PET-CALC — Tool zur Schätzung des Stromverbrauchs für AM62L-Prozessoren

AM62L PET provides power consumption estimates based on measured and simulated data; they are provided “as is” and are not guaranteed within a specified precision.
Unterstützte Produkte und Hardware
Referenzdesign

TIDA-010939 — Referenzdesign für Frontend-Controller für Elektrofahrzeug-Versorgungsausstattung

Bei diesem Referenzdesign handelt es sich um einen Frontend-Controller für Elektrofahrzeug-Versorgungsausstattung (Electric Vehicle Supply Equipment, ESVE), der als zentrales Kommunikationsmodul für den Ladevorgang von Elektrofahrzeugen fungiert. Das Design unterstützt AC und eine Vielzahl (...)
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
FCCSP (ANB) 373 Ultra Librarian

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos