首頁 微控制器 (MCU) 與處理器 Microcontrollers General-purpose MCUs
首頁
微控制器 (MCU) 與處理器
Microcontrollers
General-purpose MCUs

MSPM0G1107

現行

具有 128KB 快閃記憶體 32KB SRAM 2 個 12 位元 4Msps ADC、運算放大器的 80MHz Arm® Cortex®-M0+ MCU

立即訂購
產品規格表
使用指南
勘誤表

MSPM0G1107

現行
產品規格表 立即訂購

產品詳細資料

CPU Arm Cortex-M0+ Frequency (MHz) 80 Flash memory (kByte) 128 RAM (kByte) 32 ADC type 12-bit SAR Features 5-V-tolerant I/Os, DMA, General purpose, LIN, OpAmp, RTC UART 4 Number of ADC channels 9, 11, 16, 17 SPI 2 Hardware accelerators 0 Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, LIN, SPI, UART Operating system FreeRTOS, Zephyr RTOS Nonvolatile memory (kByte) 128 Number of GPIOs 20, 24, 28, 44, 60 Number of I2Cs 2 Security Secure debug
CPU Arm Cortex-M0+ Frequency (MHz) 80 Flash memory (kByte) 128 RAM (kByte) 32 ADC type 12-bit SAR Features 5-V-tolerant I/Os, DMA, General purpose, LIN, OpAmp, RTC UART 4 Number of ADC channels 9, 11, 16, 17 SPI 2 Hardware accelerators 0 Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, LIN, SPI, UART Operating system FreeRTOS, Zephyr RTOS Nonvolatile memory (kByte) 128 Number of GPIOs 20, 24, 28, 44, 60 Number of I2Cs 2 Security Secure debug
DSBGA (YCJ) 28 4.1615 mm² 2.87 x 1.45 LQFP (PM) 64 144 mm² 12 x 12 LQFP (PT) 48 81 mm² 9 x 9 VQFN (RGE) 24 16 mm² 4 x 4 VQFN (RGZ) 48 49 mm² 7 x 7 VQFN (RHB) 32 25 mm² 5 x 5 VSSOP (DGS) 28 34.79 mm² 7.1 x 4.9
  • Core
    • Arm 32-bit Cortex-M0+ CPU with memory protection unit, frequency up to 80MHz
  • Operating characteristics
    • Extended temperature: –40°C up to 105°C
    • Wide supply voltage range: 1.62V to 3.6V
  • Memories
    • Up to 128KB of flash memory with built-in error correction code (ECC)
    • Up to 32KB of SRAM with hardware parity
  • High-performance analog peripherals
    • Two simultaneous sampling 12-bit 4Msps analog-to-digital converters (ADCs) with up to 17 external channels
      • 14-bit effective resolution at 250ksps with hardware averaging
    • One general-purpose amplifier (GPAMP)
    • Configurable 1.4V or 2.5V internal shared voltage reference (VREF)
    • Integrated temperature sensor
  • Optimized low-power modes
    • RUN: 101µA/MHz (CoreMark)
    • SLEEP: 40µA/MHz
    • STOP: 190µA at 4MHz
    • STANDBY: 1.5µA with 32KHz LFXT, RTC with SRAM, CPU state, and registers retained
    • SHUTDOWN: 80nA with IO retained and IO wake-up capability
  • Intelligent digital peripherals
    • 7-channel DMA controller
    • Two 16-bit advanced control timers support dead band insertion and fault handling
    • Seven timers supporting up to 22 PWM channels
      • One 16-bit general purpose timer supports QEI
      • Two 16-bit general-purpose timers support low-power operation in STANDBY mode
      • One 32-bit general-purpose timer
      • Two 16-bit advanced timers with deadband and complementary outputs up to 12 PWM channels
    • Two window-watchdog timers (WWDT)
    • RTC with alarm and calendar mode
  • Enhanced communication interfaces
    • Four UART interfaces
      • One supports LIN, IrDA, DALI, Smart Card, Manchester
      • Three support low-power operation in STANDBY mode
    • Two I2C interfaces supporting FM+ (1Mbit/s), SMBus, PMBus, and wakeup from STOP mode
    • Two SPIs, one SPI supports up to 32Mbits/s
  • Clock system
    • Internal 4MHz to 32MHz oscillator (SYSOSC) with up to ±1.2% accuracy
    • Phase-locked loop (PLL) up to 80MHz
    • Internal 32kHz oscillator (LFOSC) with ±3% accuracy
    • External 4MHz to 48MHz crystal oscillator (HFXT)
    • External 32kHz crystal oscillator(LFXT)
    • External clock input
  • Data integrity and encryption
    • Cyclic redundancy checker (CRC-16, CRC-32)
  • Flexible I/O features
    • Up to 60 GPIOs
      • Two 5V-tolerant open-drain IOs
      • Two high-drive IOs with 20mA drive strength
      • Up to 5 high speed IOs
  • Development support
    • 2-pin serial wire debug (SWD)
  • Package options
    • 64-pin LQFP (PM) (0.5mm pitch)
    • 48-pin VQFN (RGZ) (0.5mm pitch)
    • 48-pin LQFP (PT) (0.5mm pitch)
    • 32-pin VQFN (RHB) (0.5mm pitch)
    • 28-pin VSSOP (28DGS) (0.5mm pitch))
    • 28-pin DSBGA (YCJ) (0.35mm pitch)
    • 24-pin VQFN (RGE) (0.5mm pitch)
  • Family members (also see Device Comparison)
    • MSPM0G1105: 32KB flash, 16KB RAM
    • MSPM0G1106: 64KB flash, 32KB RAM
    • MSPM0G1107: 128KB flash, 32KB RAM
  • Development kits and software (also see Tools and Software)
  • Core
    • Arm 32-bit Cortex-M0+ CPU with memory protection unit, frequency up to 80MHz
  • Operating characteristics
    • Extended temperature: –40°C up to 105°C
    • Wide supply voltage range: 1.62V to 3.6V
  • Memories
    • Up to 128KB of flash memory with built-in error correction code (ECC)
    • Up to 32KB of SRAM with hardware parity
  • High-performance analog peripherals
    • Two simultaneous sampling 12-bit 4Msps analog-to-digital converters (ADCs) with up to 17 external channels
      • 14-bit effective resolution at 250ksps with hardware averaging
    • One general-purpose amplifier (GPAMP)
    • Configurable 1.4V or 2.5V internal shared voltage reference (VREF)
    • Integrated temperature sensor
  • Optimized low-power modes
    • RUN: 101µA/MHz (CoreMark)
    • SLEEP: 40µA/MHz
    • STOP: 190µA at 4MHz
    • STANDBY: 1.5µA with 32KHz LFXT, RTC with SRAM, CPU state, and registers retained
    • SHUTDOWN: 80nA with IO retained and IO wake-up capability
  • Intelligent digital peripherals
    • 7-channel DMA controller
    • Two 16-bit advanced control timers support dead band insertion and fault handling
    • Seven timers supporting up to 22 PWM channels
      • One 16-bit general purpose timer supports QEI
      • Two 16-bit general-purpose timers support low-power operation in STANDBY mode
      • One 32-bit general-purpose timer
      • Two 16-bit advanced timers with deadband and complementary outputs up to 12 PWM channels
    • Two window-watchdog timers (WWDT)
    • RTC with alarm and calendar mode
  • Enhanced communication interfaces
    • Four UART interfaces
      • One supports LIN, IrDA, DALI, Smart Card, Manchester
      • Three support low-power operation in STANDBY mode
    • Two I2C interfaces supporting FM+ (1Mbit/s), SMBus, PMBus, and wakeup from STOP mode
    • Two SPIs, one SPI supports up to 32Mbits/s
  • Clock system
    • Internal 4MHz to 32MHz oscillator (SYSOSC) with up to ±1.2% accuracy
    • Phase-locked loop (PLL) up to 80MHz
    • Internal 32kHz oscillator (LFOSC) with ±3% accuracy
    • External 4MHz to 48MHz crystal oscillator (HFXT)
    • External 32kHz crystal oscillator(LFXT)
    • External clock input
  • Data integrity and encryption
    • Cyclic redundancy checker (CRC-16, CRC-32)
  • Flexible I/O features
    • Up to 60 GPIOs
      • Two 5V-tolerant open-drain IOs
      • Two high-drive IOs with 20mA drive strength
      • Up to 5 high speed IOs
  • Development support
    • 2-pin serial wire debug (SWD)
  • Package options
    • 64-pin LQFP (PM) (0.5mm pitch)
    • 48-pin VQFN (RGZ) (0.5mm pitch)
    • 48-pin LQFP (PT) (0.5mm pitch)
    • 32-pin VQFN (RHB) (0.5mm pitch)
    • 28-pin VSSOP (28DGS) (0.5mm pitch))
    • 28-pin DSBGA (YCJ) (0.35mm pitch)
    • 24-pin VQFN (RGE) (0.5mm pitch)
  • Family members (also see Device Comparison)
    • MSPM0G1105: 32KB flash, 16KB RAM
    • MSPM0G1106: 64KB flash, 32KB RAM
    • MSPM0G1107: 128KB flash, 32KB RAM
  • Development kits and software (also see Tools and Software)

MSPM0G110x microcontrollers (MCUs) are part of the MSP highly-integrated, ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ 32-bit core platform operating at up to 80MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 105°C, and operate with supply voltages ranging from 1.62V to 3.6V.

The MSPM0G110x devices provide up to 128KB embedded flash program memory with built-in error correction code (ECC) and up to 32KB SRAM with hardware parity option. The devices also incorporate a memory protection unit, 7-channel DMA, and a variety of high-performance analog peripherals such as two 12-bit 4Msps ADCs, configurable internal shared voltage reference, and one general-purpose amplifier. These devices also offer intelligent digital peripherals such as two 16-bit advanced control timers, five general purpose timers (with one 16-bit general-purpose timer for QEI interface, two 16-bit general-purpose timers for STANDBY mode, and one 32-bit general-purpose timer), two windowed-watchdog timers, and one RTC with alarm and calendar mode. These devices provide data integrity and encryption peripherals (CRC) and enhanced communication interfaces (four UART, two I2C, two SPI).

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration that allow customers to find the MCU that meets project needs. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.

MSPM0G110x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad available for purchase. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.

For complete module descriptions, see the MSPM0 G-Series 80MHz Microcontrollers Technical Reference Manual.

MSPM0G110x microcontrollers (MCUs) are part of the MSP highly-integrated, ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ 32-bit core platform operating at up to 80MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 105°C, and operate with supply voltages ranging from 1.62V to 3.6V.

The MSPM0G110x devices provide up to 128KB embedded flash program memory with built-in error correction code (ECC) and up to 32KB SRAM with hardware parity option. The devices also incorporate a memory protection unit, 7-channel DMA, and a variety of high-performance analog peripherals such as two 12-bit 4Msps ADCs, configurable internal shared voltage reference, and one general-purpose amplifier. These devices also offer intelligent digital peripherals such as two 16-bit advanced control timers, five general purpose timers (with one 16-bit general-purpose timer for QEI interface, two 16-bit general-purpose timers for STANDBY mode, and one 32-bit general-purpose timer), two windowed-watchdog timers, and one RTC with alarm and calendar mode. These devices provide data integrity and encryption peripherals (CRC) and enhanced communication interfaces (four UART, two I2C, two SPI).

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration that allow customers to find the MCU that meets project needs. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.

MSPM0G110x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad available for purchase. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.

For complete module descriptions, see the MSPM0 G-Series 80MHz Microcontrollers Technical Reference Manual.
filter 尋找其它 General-purpose MCUs
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 69
重要文件 類型 標題 格式選項 日期
* Data sheet MSPM0G110x Mixed-Signal Microcontrollers datasheet (Rev. D) PDF | HTML 2025年 10月 7日
* Errata MSPM0G350x, MSPM0G150x Mixed-Signal Microcontrollers Errata (Rev. F) PDF | HTML 2023年 7月 25日
* User guide MSPM0 G-Series 80-MHz Microcontrollers Technical Reference Manual (Rev. C) 2025年 8月 19日
Application note Cybersecurity Enablers in MSPM0 MCUs (Rev. A) PDF | HTML 2025年 12月 10日
Application note EMC Improvement Guide for MSPM0 (Rev. A) PDF | HTML 2025年 12月 2日
Application note MSPM0 ADC Noise Analysis and Application (Rev. A) PDF | HTML 2025年 11月 14日
Subsystem design ADC to I2C (Rev. A) PDF | HTML 2025年 9月 10日
Subsystem design ADC to UART (Rev. A) PDF | HTML 2025年 9月 9日
Subsystem design DMA Ping Pong With ADC (Rev. B) PDF | HTML 2025年 9月 9日
Subsystem design Thermistor Temperature Sensing (Rev. A) PDF | HTML 2025年 9月 9日
Application note MSPM0 Bootloader Implementation (Rev. D) PDF | HTML 2025年 9月 4日
Subsystem design ADC to SPI (Rev. A) PDF | HTML 2025年 8月 27日
Subsystem design Digital FIR Filter (Rev. A) PDF | HTML 2025年 8月 27日
User guide MSPM0 MCUs Development Guide (Rev. G) PDF | HTML 2025年 8月 27日
Subsystem design Digital IIR Filter (Rev. A) PDF | HTML 2025年 8月 26日
Subsystem design Power Sequencer (Rev. A) PDF | HTML 2025年 8月 25日
Subsystem design 5V Interface (Rev. A) PDF | HTML 2025年 8月 20日
Subsystem design Data Sensor Aggregator Subsystem Design (Rev. A) PDF | HTML 2025年 8月 20日
Subsystem design CAN to I2C Bridge (Rev. A) PDF | HTML 2025年 8月 19日
Subsystem design CAN to SPI Bridge (Rev. A) PDF | HTML 2025年 8月 19日
Subsystem design CAN to UART bridge (Rev. A) PDF | HTML 2025年 8月 19日
Subsystem design PWM Control Using Push-Buttons PDF | HTML 2025年 8月 14日
Subsystem design Using MSPM0 as a Watchdog Timer PDF | HTML 2025年 8月 14日
Subsystem design Emulate EEPROM with FLASH (Type A) (Rev. A) PDF | HTML 2025年 8月 13日
Subsystem design Common Amplifier Topologies: PGA (Rev. A) PDF | HTML 2025年 8月 12日
Subsystem design LED Driver With PWM (Rev. A) PDF | HTML 2025年 8月 12日
Subsystem design Transimpedance Amplifier (Rev. A) PDF | HTML 2025年 8月 12日
Subsystem design Emulate EEPROM With FLASH (Type B) (Rev. A) PDF | HTML 2025年 8月 6日
Subsystem design MCU Design Techniques: ADC to PWM (Rev. A) PDF | HTML 2025年 8月 1日
Analog Design Journal 在馬達控制中選擇位置感測器 PDF | HTML 2025年 7月 10日
Subsystem design Simultaneous Sampling of ADCs PDF | HTML 2025年 6月 30日
Application note Capturing PWM 0% to 100% Duty Cycle with MSPM0 MCU PDF | HTML 2025年 6月 12日
Application note Migration Guide From MSP430 MCUs to MSPM0 MCUs (Rev. B) PDF | HTML 2025年 6月 2日
Application note Migration Guide From STM8 to MSPM0 (Rev. A) PDF | HTML 2025年 5月 21日
White paper MSPM0 MCU Advantages in Automotive Application PDF | HTML 2025年 3月 11日
Application note LIN Basics and Implementation on MSPM0 PDF | HTML 2025年 2月 21日
Application note Laser Speckle Reduction Solution in Projector based on MSPM0 MCU PDF | HTML 2025年 2月 20日
User guide Migration Guide From NXP to MSPM0 PDF | HTML 2025年 2月 3日
Application note Closed Loop Constant Power Drive to Simplify Heater Element Control and Extend Battery Life PDF | HTML 2025年 1月 29日
Application note BQ79616 Control Based on MSPM0 Through UART to CAN PDF | HTML 2024年 12月 16日
Application note MSPM0G3507 Low Power Test and Guidance PDF | HTML 2024年 10月 18日
Application note Understanding the MSPM0 Debug Subsystem PDF | HTML 2024年 9月 23日
Application note A2L Refrigerant Standard Overview and TI Mitigation Control Board Designs for Designers PDF | HTML 2024年 9月 16日
Application note TPS929xxx LED Driver Control Using MSPM0 Through UART Over CAN PDF | HTML 2024年 9月 4日
Application note SPI to CAN Bridge on MSPM0 MCUs PDF | HTML 2024年 8月 28日
Application brief Bridge Design Between CAN and SPI with MSPM0 MCUs PDF | HTML 2024年 6月 17日
Application brief Bridge Design Between CAN and UART with MSPM0 MCUs PDF | HTML 2024年 6月 17日
Application brief Bridge Design between CAN and I2C with MSPM0 MCUs 2024年 6月 17日
Application note Designing Temperature Monitoring Systems with NTC and RTD PDF | HTML 2024年 5月 15日
Application brief Automotive Seat Comfort Module Using MSPM0 PDF | HTML 2024年 5月 1日
Application note Realization of Password-Protected Debug Based on Software PDF | HTML 2024年 3月 6日
Technical article 為什麼互通性對於不斷發展的電動車充電市場很重要 PDF | HTML 2024年 1月 26日
Product overview Realizing UWB Passive Entry Passive Start (PEPS) Design with MSPM0 MCU PDF | HTML 2024年 1月 12日
Product overview Realizing HVAC FAN Control Design with MSPM0 MCU PDF | HTML 2023年 12月 21日
Application note MSPM0 Enables Cost-Effective Field Transmitter Applications PDF | HTML 2023年 12月 15日
Application note Operating Time of MSPM0 Powered by a Capacitor PDF | HTML 2023年 10月 3日
Application brief Build Scalability in Cordless Power and Garden Tools Using Low-Cost MSPM0 MCUs (Rev. A) PDF | HTML 2023年 9月 27日
Application brief Designing Single- and Three-Axis Selfie Sticks With MSPM0 MCUs (Rev. A) PDF | HTML 2023年 9月 21日
Application brief BLDC and PMSM Control Using Sensorless FOC Algorithm Based on MSPM0 MCUs (Rev. A) PDF | HTML 2023年 9月 14日
Application brief Using MSPM0 MCUs to Design Trapezoidal-Based BLDC Motor Controllers (Rev. A) PDF | HTML 2023年 9月 14日
Application note EEPROM Emulation Type A Solution PDF | HTML 2023年 4月 18日
Application note EEPROM Emulation Type B Design PDF | HTML 2023年 4月 11日
Application brief Increasing Flexibility in Your Battery Management Designs With a Low-Cost MSPM0 PDF | HTML 2023年 3月 2日
Application brief Optimizing Field Sensor and Transmitter Applications With MSPM0 MCUs PDF | HTML 2023年 3月 2日
Application brief Simplifying Pulse Oximeter Designs With Low-Cost Highly Integrated MSPM0 MCUs PDF | HTML 2023年 3月 2日
Application note MSPM0 G-Series MCUs Power Optimization Guide PDF | HTML 2023年 2月 22日
White paper MSPM0: Idea to Product With Easy-to-Use Tools, Software, and Academy PDF | HTML 2023年 2月 22日
Application note Make System Design Easy With MSPM0 Precision Analog PDF | HTML 2023年 2月 22日
Application note MSPM0L or MSPM0G: How to Pick the Right MSP Microcontroller for Your Application PDF | HTML 2022年 12月 13日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DLPDLCR160CPEVM — 適用於具備 0.16 nHD 之 DLP® LightCrafter™ Display 的 DLP160CP 評估模組

DLP® LightCrafter™ Display 0.16-nHD 評估模組 (EVM) 旨在實現微控制器 (MCU) 產生的圖形顯示，且不需具備視訊處理器。這在電器、人機介面、機器人和玩具等工業和個人電子應用中，為平價 DLP 自由形式隨選顯示實作開創了全新的可能性。此 EVM 搭載 DLP160CP 晶片組，包括 DLPC3421、0.16-nHD (360x640) 光學引擎和 MSPM0G3507 MCU，可提供開箱即用的影像產生功能。請造訪 DLPDLCR2000EVM，瞭解使用微處理器驅動 (MPU) 顯示應用的 EVM (不包括 MPU)。

使用指南: PDF | HTML
TI.com 無法提供
開發板

DRV8844AEVM — DRV8844A 評估模組

DRV8844A 評估模組 (EVM) 可用於輕鬆評估 DRV8844A 馬達驅動器。EVM 已編程並配置為可立即使用並開始轉動馬達。EVM 展示四路 1/2 全橋式 DC 馬達驅動器，最多可驅動四個電磁閥、兩個有刷 DC 馬達，以及其他負載。DRV8844A 還能在每個獨立半橋上連接感測電阻器，使馬達控制等應用進行系統層級的電流感測。
使用指南: PDF | HTML
TI.com 無法提供
開發板

LP-MSPM0G3507 — 適用於 80-MHz Arm® Cortex®-M0+ MCU 的 MSPM0G3507 LaunchPad™ 開發套件

LP-MSPM0G3507 LaunchPad™ 開發套件是基於 MSPM0G3507 的易用型評估模組 (EVM)。其包含開始在 MSPM0G3507 M0+ MCU 平台上開發所需的一切，包括用於編程、偵錯和能源量測的板載偵錯探測器。電路板包含三個按鈕、兩個 LED (一個是 RGB LED) 和一個類比溫度感測器和光感測器。此外也具備外部緩衝器，可在 4 MSPS 顯示高速 ADC 性能。

使用指南: PDF | HTML
TI.com 無法提供
開發板

PSEM0MCUDAUEVM-018 — 適用於 24 埠 IEEE 802.3bt 就緒 PSE 系統的 MSPM0 MCU 子卡

本參考設計展示了一個 24 埠 PSE 系統的評估模組，其中包含硬體套件、系統韌體映像檔及系統韌體圖形使用者介面。該硬體套件包含一塊主機板 (PSEMTHR24EVM-081)、一塊 MSP430 子卡 (PSEMCUDAUEVM-082) 或 MSPM0 子卡 (PSEM0DAUEVM-018)，以及一塊 PSE 子卡 (TPS23881EVM-083)。欲評估此系統（包含硬體與軟體），亦需配備 USB2ANY 與 MSP-FET 轉接器。本指南已修訂，以反映採用新款 MSPM0G1107 MCU 於多埠 PoE 系統的硬體設計。
要求
開發板

ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器

μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。

在單機模式下，只要按下「開始」按鈕或透過一些 TTL 控制線，就可以執行編程週期。

其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。

從：Algocraft
造訪合作夥伴網站
偵錯探測器

TMDSEMU110-U — XDS110 JTAG 偵錯探測器

德州儀器 XDS110 是一種全新的偵錯探測器 (模擬器) 類別，適用於 TI 嵌入式處理器。XDS110 取代 XDS100 系列，可在單一 Pod 中支援更廣泛的標準 (IEEE1149.1、IEEE1149.7、SWD)。同時，所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。  對於針腳上的核心追蹤，則需要 XDS560v2 PRO TRACE。

德州儀器 XDS110 透過 TI 20 針腳連接器（具有用於 TI 14 針腳和 Arm 10 針腳和 Arm 20 針腳的多轉接器）連接到目標電路板，並透過 USB2.0 (...)

使用指南: PDF
TI.com 無法提供
偵錯探測器

TMDSEMU200-U — XDS200 USB 偵錯探測器

XDS200 是為 TI 嵌入式裝置偵錯的偵錯探測器（模擬器）。對於大多數裝置，建議使用較新、成本較低的 XDS110 (www.ti.com/tool/TMDSEMU110-U)。XDS200 支援單一 Pod 中廣泛的標準（IEEE1149.1、IEEE1149.7、SWD）。所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。

XDS200 透過 TI 20 接腳連接器（配備適用 TI 14 接腳、Arm Cortex® 10 接腳和 Arm 20 接腳的多重轉接器）連接到目標電路板，並透過 USB2.0 高速 (...)

TI.com 無法提供
偵錯探測器

LB-3P-TRACE32-ARM — 適用於 Arm® 架構微控制器和處理器的 Lauterbach TRACE32® 偵錯和追蹤系統

Lauterbach 的 TRACE32® 工具是一套先進的軟硬體元件，可讓開發人員分析、最佳化及認證各種 Arm® 架構微控制器和處理器。全球知名的嵌入式系統和 SoC 偵錯和追蹤解決方案是完美的解決方案，適用於從早期的矽前 (pre-silicon) 開發，到產品認證和現場故障排除等所有開發階段。Lauterbach 工具的直覺模組化設計為工程師提供現今最高的可用性能，以及可隨需求變化而調整和成長的系統。藉由 TRACE32® 偵錯器，開發人員也可透過單一偵錯介面，同時偵錯和控制 SoC 中的任何 C28x/C29x/C6x/C7x DSP 核心及所有其他 Arm (...)

從：Lauterbach GmbH
View Options
硬體程式設計工具

ALGO-3P-WRITENOW — Algocraft WriteNow！程式設計工具

WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧，便於整合至 ATE 與固定裝置。編程器可單機運作，或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線，並隨附操作簡易的工具軟體。

從：Algocraft
造訪合作夥伴網站
軟體開發套件 (SDK)

MSPM0-SDK — MSPM0 Software Development Kit (SDK)

The MSPM0 SDK provides the ultimate collection of software, tools and documentation to accelerate the development of applications for the MSPM0 MCU platform under a single software package.

支援產品和硬體

支援產品和硬體
瀏覽 下載選項
驅動程式或資料庫

MSPM0-DIAGNOSTIC-LIB — MSPM0 diagnostic library

The MSPM0 diagnostic library software development kit (SDK) is a collection of functional safety software to assist customers to meet their functional safety diagnostic requirements.

支援產品和硬體

支援產品和硬體
要求
開發模組 (EVM) 的 GUI

MSPM0-ANALOG-CONFIGURATOR — Analog Configurator for MSPM0

The MSPM0 analog configurator is a graphical configuration tool designed to simplify and accelerate the design and enablement of an analog signal chain using a MSPM0 device with no traditional coding development necessary.

The tool uses an intuitive GUI to configure a signal chain using the high (...)

支援產品和硬體

支援產品和硬體
啟動 下載選項
快速入門

CCSTUDIO-STARTHUB — Example application browser

Explore a vast library of example projects, categorized by application type, with support for multiple development environments
支援產品和硬體

支援產品和硬體
啟動 下載選項
快速入門

MSP-MOTOR-CONTROL — MSPM0 Firmware solutions for motor control applications

MSP Motor Control is a collection of software, tools and examples to spin motors in 30 minutes or less with MSPM0 Arm® Cortex® M0+ MCUs and popular motor driver solutions.

MSP Motor Control provides examples for supported hardware kits to spin brushed, stepper, and three-phase motors with sensored (...)

支援產品和硬體

支援產品和硬體
開始使用 下載選項
快速入門

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
支援產品和硬體

支援產品和硬體
開始使用
IDE、配置、編譯器或偵錯程式

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.

(...)

支援產品和硬體

支援產品和硬體
啟動 下載選項
IDE、配置、編譯器或偵錯程式

MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers

MSP Zero Code Studio is a visual design environment that simplifies firmware development, making it possible to configure, develop, and run microcontroller applications in minutes with zero coding and no IDE required. Available as a standalone download or on the cloud.

支援產品和硬體

支援產品和硬體
啟動 下載選項
IDE、配置、編譯器或偵錯程式

SYSCONFIG — Standalone desktop version of SysConfig

SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.

SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)

支援產品和硬體

支援產品和硬體
啟動 下載選項
線上培訓

MSPM0-ACADEMY — MSPM0 Academy

MSPM0 Academy delivers easy-to-use training modules that span a wide range of topics and LaunchPads in the MSPM0 MCU portfolio.
支援產品和硬體

支援產品和硬體
瀏覽
作業系統 (OS)

GHS-3P-UVELOSITY — Green Hills Software u-velOSity Safety RTOS

The µ-velOSity™ Safety RTOS is the smallest of Green Hills Software's real-time operating systems and was designed especially for microcontrollers. It supports a wide range of TI processor families using the Arm® Cortex-M or Cortex-R cores as a main CPU or as a co-processors (...)
從：Green Hills Software
造訪合作夥伴網站
軟體程式設計工具

MSP-GANG-SOFTWARE — MSP-GANG Software

The MSP Gang Programmer (MSP-GANG) is a MSPM0/MSP430/MSP432 device programmer that can program up to eight identical devices at the same time.
支援產品和硬體

支援產品和硬體
下載選項
軟體程式設計工具

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.

UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)

支援產品和硬體

支援產品和硬體
啟動 下載選項
設計工具

MSP-3P-SEARCH — MSP 第三方搜尋工具

TI has partnered with multiple companies to offer a wide range of solutions and services for TI MSP devices. These companies can accelerate your path to production using MSP devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your needs.

(...)

下載
參考設計

TIDA-050026-23881 — 適合多埠應用的 24 埠 (PoE 2、4 對) 電源設備參考設計

This reference design showcases a Type-4 (PoE 2, 4-Pair) 24-port Ethernet switch for Power over Ethernet (PoE) applications which can send up to 90W per port for for IEEE 802.3bt (PoE 2) applications and up to 120W per port for non-standard applications. Based on the MSP430F523x and MSPM0G1107x (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-050026-23882 — 適合多埠應用的 24 埠 (PoE 2、2 對) 電源設備參考設計；

This reference design showcases a Type-3, 30W, 2-Pair 24-port Ethernet switch for Power over Ethernet (PoE) applications which can send up to 30W per port for IEEE 802.3bt Type 3 applications and up to 60W per port for non-standard applications. Based on the MSP430F523x and MSPM0G1107x family, TI's (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-010262 — 具有資料線供電能力的 10BASE-T1L 四埠單對乙太網路參考設計

此參考設計展現乙太網路閘道，可做為四個配備資料線供電 (PoDL) 和 1000BASE-T 乙太網路埠的 10BASE-T1L 單對乙太網路 (SPE) 埠間的橋接器使用。四個 SPE 埠可用作電源設備 (PSE)，爲實地裝置提供 24V 電壓。閘道由 AM6442 微處理器控制，並使用 Linux® 作業系統，其可以是靈活且可擴展的開放原始碼軟體。
Design guide: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YCJ) 28 Ultra Librarian
LQFP (PM) 64 Ultra Librarian
LQFP (PT) 48 Ultra Librarian
VQFN (RGE) 24 Ultra Librarian
VQFN (RGZ) 48 Ultra Librarian
VQFN (RHB) 32 Ultra Librarian
VSSOP (DGS) 28 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片