MSPM33C321A
- Core
- 160MHz Arm 32-bit Cortex-M33 CPU with TrustZone, FPU, and DSP extensions
- 4kB instruction cache for 0 wait-state execution
- Operating characteristics
- Extended temperature: –40°C up to 125°C
- Wide supply voltage range: 1.71V to 3.6V
- Memories
- Up to 1MB of flash memory with error
correction code (ECC)
- Dual-bank with address swap
- 256kB of SRAM with ECC
- EEPROM operations using 32kB high-endurance data flash
- Up to 1MB of flash memory with error
correction code (ECC)
- Security
- Immutable Root of Trust (RoT) in ROM, supports secure firmware installation, boot and key provisioning
- Global Security Controller (GSC) with dynamic access controls for flash, SRAM, and peripherals
- AES256 hardware accelerator with GCM
- SHA256 hardware accelerator with HMAC
- Public Key Accelerator (PKA) supports ECC and RSA
- True random number generator (TRNG)
- High-performance analog
peripherals
- Two high-speed simultaneous sampling 9.4Msps 12-bit analog-to-digital converters (ADCs) with up to 36 external channels
- Two high-speed/low-power comparators (COMP)
- Two externally available 8-bit DACs
- Configurable 1.4V or 2.5V internal shared voltage reference (VREF)
- Integrated temperature & supply monitor
- Optimized low-power modes
- RUN: 211µA/MHz (CoreMark)
- SLEEP: 3.8mA at 32MHz
- STOP: 143µA at 4MHz
- STANDBY: 8µA with CPU execution resume and 64kB SRAM retention
- SHUTDOWN: <100nA with IO wake-up capability
- Optimized digital peripherals
- Two DMA controllers with 16 total channels
- Nine timers support up to 30 PWM
channels
- Two 16-bit advanced timers with deadband, fault handling, and complementary pair
- Four 16-bit general-purpose timers
- One 32-bit general-purpose timer
- Two 16-bit general-purpose timer supporting quadrature encoder interface
- One window-watchdog timer
- CRC16/32 module
- Enhanced communication
interfaces
- Quad SPI (QSPI) for external memory up to 20Mbytes/s
- Two Controller Area Network (CAN) interfaces support CAN 2.0A/B and CAN-FD
- Three configurable serial interfaces supporting UART (LIN) or I2C (SMBus/PMBus)
- Four configurable serial interfaces supporting UART, I2C, or SPI
- Two dedicated I2C interfaces support up to FM+ (1Mbit/s), SMBus/PMBus
- One dedicated SPI interface
- One dedicated UART interface supporting LIN, IrDA, DALI, Smart Card, Manchester
- Two digital audio interfaces support full duplex I2S and TDM (16-slots)
- VBAT island (auxiliary supply)
- Independent supply with dedicated VBAT pin
- Real-time clock (RTC)
- Three tamper detection IO with timestamp
- Independent watchdog timer (IWDT)
- 32B backup memory
- Clock system
- Internal 32MHz oscillator (SYSOSC)
- Phase-locked loop (PLL)
- Internal 32kHz oscillator (LFOSC)
- External 4 to 48MHz crystal oscillator (HFXT)
- External 32kHz crystal oscillator (LFXT)
- External clock input
- Flexible I/O features
- Up to 93 GPIOs
- Development support
- 2-pin serial wire debug (SWD)
- Package options
- 100-pin LQFP (0.4mm & 0.5mm pitch)
- 80-pin LQFP (0.5mm pitch)
- 64-pin LQFP (0.5mm pitch)
- 48-pin VQFN (0.5mm pitch)
- 100-pin nFBGA (0.8mm pitch)
- 79-pin WCSP (0.35mm pitch)
- Family members (also see
Device Comparison)
- MSPM33C321A: 1MB flash, 256KB SRAM
- MSPM33C3219: 512KB flash, 256KB SRAM
- Development kits and software
(also see Tools and Software)
- LaunchPad EVM LP-MSPM33C321A
- MSP Software Development Kit (SDK)
MSPM33C321x microcontrollers (MCUs) are part of the MSP general purpose 32-bit MCU family operating at up to 160MHz based on the Arm Cortex-M33 32-bit core with Arm TrustZone technology, DSP, and FPU. This family of MCUs features flexible communication interfaces, high-performance analog, and security accelerators. The extended temperature range and wide supply voltage range make this family of MCUs suitable for a variety of industrial, enterprise, and personal electronics applications.
MSPM33C321x MCUs provide up to 1MB of embedded flash program memory and 256kB SRAM. An additional high-endurance 32kB flash data bank is provided for application data storage. All memories feature built-in error correction code (ECC) across the entire memory range to ensure robust operation across their entire lifetime.
MSPM33C321x MCUs offer many different types of digital communication interfaces including CAN, I2S/TDM, Quad SPI (QSPI), UART, I2C, and SPI. Configurable serial interfaces can be dynamically assigned in software as UART, I2C and optionally SPI. Flexibility in configuration and pinout gives system designers a simple path to support challenging requirements.
MSPM33C321x MCUs also feature high performance integrated analog peripherals such as two 12-bit 9.4Msps simultaneous sampling ADC and two high-speed low-power comparators. Comparators can be used internally for fault detection with advanced timers or externally as low-power voltage monitors.
MSPM33C321x MCUs contain a robust collection of security features. TrustZone technology and the Global Security Controller (GSC) provide a complete feature set to build secure applications. These devices also feature an immutable root of trust (RoT) which provides secure boot, install and key provisioning out of the box. MSPM33C321x also includes hardware acceleration for AES, SHA and Public Key algorithms (RSA and ECC). These devices provide an efficient Post Quantum Cryptography (PQC) software library support.
MSPM33C series of devices is pin-to-pin compatible with other MSPM33C devices in the same package. MSPM33C series is also highly pin-to-pin compatible with MSPM0 devices. In scenarios where there are differences between MSPM33C and MSPM0 devices users can use TI System Configurator or the migration guide to understand how to navigate minor incompatibilities.
MSPM33C family of MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad available for purchase. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM33C MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
LP-MSPM33C321A — MSPM33C321A LaunchPad™ 開發套件
MSPM33-SDK — MSPM33 Software Development Kit (SDK)
MSPM33-ZEPHYR-SDK — Zephyr SDK for MSPM33 Devices
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
CCStudio™ IDE 是一款專為德州儀器嵌入式處理器而設計的整合式開發環境,提供桌上型或雲端型兩種應用形式。它是 TI 龐大的 CCStudio™ 開發生態系統的重要組成部分。
CCStudio IDE 建立在 Eclipse Theia™ 框架上,因此 VS Code® 使用者會十分熟悉其介面。此外,如果您希望使用原生的 VS Code® 解決方案,CCStudio for VS Code 可在 VS Code 環境中增加對 TI 的支援。
AI 驅動開發
無論您是初學者或經驗豐富的專業人士,AI 皆可提高生產力,並幫助實現以往無法達成的任務。我們詳盡的 AI 就緒文件為 AI (...)
CCSTUDIO-OPENOCD — OpenOCD Binary Releases
CCSTUDIO-VSCODE — CCStudio™ for VS Code®
CCStudio™ for VS Code 將 TI 的嵌入式開發工具導入到 Visual Studio Code® 中,這是現今開發人員中使用最廣泛的程式碼編輯器。無需開發人員學習新的 IDE,而是直接建立在 VS Code 龐大的擴充功能與工具生態系統之上。使用 CMake 與 Ninja 進行建置、透過 GDB 與 OpenOCD 進行偵錯,並在統一的專案檢視中管理一切功能,完全無需離開 VS Code。
AI 驅動開發
適用於 VS Code 的 CCStudio 從一開始就將 AI 納入考量。AI (...)
EDGE-AI-EXTENSION — Edge AI Toolkit Extension for CCStudio™ IDE and VS Code®
Edge AI Studio is part of the CCStudio™ development tool ecosystem. Edge AI Studio is a collection of graphical and command line tools designed to accelerate edge AI development on TI processors, microcontrollers, connectivity devices and radar sensors. It supports both AI-accelerated (...)
EDGE-AI-STUDIO-MCU — Edge AI Studio for Microcontrollers
Edge AI Studio is part of the CCStudio™ development tool ecosystem. Edge AI Studio is a collection of graphical and command line tools designed to accelerate edge AI development on TI processors, microcontrollers, connectivity devices and radar sensors. It supports both AI-accelerated (...)
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分,是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄,以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面,並可在桌面上或雲端中執行。
UniFlash 可從 CCStudio™ 開發人員區上的雲端執行,或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。
請注意,mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| NFBGA (ZAW) | 100 | Ultra Librarian |
| LQFP (PZ) | 100 | Ultra Librarian |
| LQFP (PN) | 80 | Ultra Librarian |
| LQFP (PM) | 64 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。