Home Verstärker Instrumentenverstärker
Home
Verstärker
Instrumentenverstärker

INA848

AKTIV

Extrem rauscharmer Instrumentenverstärker mit hoher Bandbreite und festem Verstärkungsfaktor von 200

Jetzt bestellen
Datenblatt

INA848

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of channels 1 Vs (max) (V) 36 Vs (min) (V) 8 Input offset (±) (max) (µV) 35 Voltage gain (min) (V/V) 2000 Voltage gain (max) (V/V) 2000 Noise at 1 kHz (typ) (nV√Hz) 1.5 Features Current Feedback, High speed, Super-beta, Ultra-low noise CMRR (min) (dB) 132 Input offset drift (±) (max) (µV/°C) 0.45 Input bias current (±) (max) (nA) 50 Iq (typ) (mA) 6.2 Bandwidth at min gain (typ) (MHz) 2.8 Gain error (±) (max) (%) 0.15 Operating temperature range (°C) -40 to 125 Rating Catalog Type Fixed Gain Gain nonlinearity (±) (max) (%) 0.001 Output swing headroom (to negative supply) (typ) (V) 0.15 Output swing headroom (to positive supply) (typ) (V) -0.15 Input common mode headroom (to negative supply) (typ) (V) 2.5 Input common mode headroom (to positive supply) (typ) (V) -2.5 Noise at 0.1 Hz to 10 Hz (typ) (µVPP) 0.055
Number of channels 1 Vs (max) (V) 36 Vs (min) (V) 8 Input offset (±) (max) (µV) 35 Voltage gain (min) (V/V) 2000 Voltage gain (max) (V/V) 2000 Noise at 1 kHz (typ) (nV√Hz) 1.5 Features Current Feedback, High speed, Super-beta, Ultra-low noise CMRR (min) (dB) 132 Input offset drift (±) (max) (µV/°C) 0.45 Input bias current (±) (max) (nA) 50 Iq (typ) (mA) 6.2 Bandwidth at min gain (typ) (MHz) 2.8 Gain error (±) (max) (%) 0.15 Operating temperature range (°C) -40 to 125 Rating Catalog Type Fixed Gain Gain nonlinearity (±) (max) (%) 0.001 Output swing headroom (to negative supply) (typ) (V) 0.15 Output swing headroom (to positive supply) (typ) (V) -0.15 Input common mode headroom (to negative supply) (typ) (V) 2.5 Input common mode headroom (to positive supply) (typ) (V) -2.5 Noise at 0.1 Hz to 10 Hz (typ) (µVPP) 0.055
SOIC (D) 8 29.4 mm² 4.9 x 6
  • Fixed gain of 2000 V/V
  • Access to internal nodes for filtering
  • Ultra-low noise: 1.5 nV/√Hz input voltage noise (maximum)
  • Precision super-beta input performance:
    • Low offset voltage: 35 µV (maximum)
    • Low offset voltage drift: 0.45 µV/°C (maximum)
    • Low input bias current: 25 nA (typical)
    • Low gain drift: 5 ppm/°C (maximum)
  • Bandwidth: 2.8 MHz
  • Slew rate: 45 V/µs
  • Common-mode rejection: 132 dB (minimum)
  • Supply range:
    • Single supply: 8 V to 36 V
    • Dual supply: ±4 V to ±18 V
  • Specified temperature range: –40°C to +125°C
  • Package: 8-pin SOIC
  • Fixed gain of 2000 V/V
  • Access to internal nodes for filtering
  • Ultra-low noise: 1.5 nV/√Hz input voltage noise (maximum)
  • Precision super-beta input performance:
    • Low offset voltage: 35 µV (maximum)
    • Low offset voltage drift: 0.45 µV/°C (maximum)
    • Low input bias current: 25 nA (typical)
    • Low gain drift: 5 ppm/°C (maximum)
  • Bandwidth: 2.8 MHz
  • Slew rate: 45 V/µs
  • Common-mode rejection: 132 dB (minimum)
  • Supply range:
    • Single supply: 8 V to 36 V
    • Dual supply: ±4 V to ±18 V
  • Specified temperature range: –40°C to +125°C
  • Package: 8-pin SOIC

The INA848 is a fixed-gain instrumentation amplifier optimized for high-precision measurements, such as very-small, fast, differential input signals. TI’s super-beta topology provides a very low input bias current and current noise. The well-matched transistors help achieve a very low offset and offset drift. Matching of the internal resistors yields a high common-mode rejection ratio of 132 dB across the full input-voltage range, and a very low gain drift error of 5 ppm/⁰C (max).

The current-feedback topology of the INA848 produces a wide bandwidth of 2.8 MHz at a fixed gain of 2000, thereby eliminating the need for subsequent gain stages. The very-low noise floor of 1.3 nV/√Hz minimizes the impact on the equivalent number of bits (ENOB) when interfacing with high-resolution analog-to-digital converters (ADCs). The INA848 provides the flexibility of adding filters between the gain stages (pins 2 and 3) to maintain an adequate signal integrity.

These unique features of the INA848 make this device an excellent choice for applications requiring high-precision measurements, such as high-end medical instrumentation, electroencephalography, vibration sensing, and displacement measurements.

This device is designed for 8-V to 36-V single supplies, or ±4-V to ±18-V on dual supplies.

The INA848 is a fixed-gain instrumentation amplifier optimized for high-precision measurements, such as very-small, fast, differential input signals. TI’s super-beta topology provides a very low input bias current and current noise. The well-matched transistors help achieve a very low offset and offset drift. Matching of the internal resistors yields a high common-mode rejection ratio of 132 dB across the full input-voltage range, and a very low gain drift error of 5 ppm/⁰C (max).

The current-feedback topology of the INA848 produces a wide bandwidth of 2.8 MHz at a fixed gain of 2000, thereby eliminating the need for subsequent gain stages. The very-low noise floor of 1.3 nV/√Hz minimizes the impact on the equivalent number of bits (ENOB) when interfacing with high-resolution analog-to-digital converters (ADCs). The INA848 provides the flexibility of adding filters between the gain stages (pins 2 and 3) to maintain an adequate signal integrity.

These unique features of the INA848 make this device an excellent choice for applications requiring high-precision measurements, such as high-end medical instrumentation, electroencephalography, vibration sensing, and displacement measurements.

This device is designed for 8-V to 36-V single supplies, or ±4-V to ±18-V on dual supplies.
filter Andere Instrumentenverstärker suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
INA849 AKTIV Extrem rauscharmer Instrumentenverstärker (1 nV/√Hz), hohe Geschwindigkeit (28 MHz, 35 V/μs), Präzis Resistor set gain version
INA851 AKTIV Rauscharmer (3,2 NV/√Hz) Highspeed-Volldifferenzial-Instrumentenverstärker (22 MHz) mit Überspannung Fully differential output, overvoltage protection (±60 V) and attenuation gain.

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 3
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet INA848 Ultra-Low-Noise (1.5 nV/√Hz), High-Bandwidth Instrumentation Amplifier With Fixed Gain of 2000 datasheet PDF | HTML 24 Sep 2020
Application note Importance of Input Bias Current Return Paths in Instrumentation Amplifier Apps PDF | HTML 27 Jul 2021
Technical article What is an instrumentation amplifier? PDF | HTML 09 Aug 2019

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

INA848 PSpice Model (Rev. B)

SBOMBI4B.ZIP (24 KB) - PSpice Model
Herunterladen
Simulationsmodell

INA848 TINA-TI Reference Design

SBOMBI5.TSC (40 KB) - TINA-TI Reference Design
Herunterladen
Simulationsmodell

INA848 TINA-TI Spice Model

SBOMBI3.ZIP (23 KB) - TINA-TI Spice Model
Herunterladen
Berechnungstool

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Start Herunterladen
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese Design- und Simulationssuite mit vollem Funktionsumfang verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Benutzerhandbuch: PDF
View Options
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOIC (D) 8 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos