ADS112C04

AKTIV

Kleiner 4-Kanal-16-Bit-Delta-Sigma-ADC, 2 kSPS, mit PGA, VREF, 2x IDACs & I2C-Schnittstelle

Jetzt bestellen

Datenblatt

document-pdfAcrobat ADS112C04 16-Bit, 4-Channel, 2-kSPS, Delta-Sigma ADC With I2C Interface datasheet (Rev. A) (Englisch) PDF | HTML

ADS112C04

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Resolution (Bits)

16

Sample rate (max) (ksps)

2

Number of input channels

4

Interface type

I2C

Architecture

Delta-Sigma

Input type

Differential, Single-ended

Multichannel configuration

Multiplexed

Rating

Catalog

Reference mode

External, Internal

Input voltage range (max) (V)

2.85, 5.6

Input voltage range (min) (V)

-2.85, 0

Features

50/60 Hz Rejection, Excitation Current Sources (iDACs), Oscillator, PGA, Small Size, Temp Sensor

Operating temperature range (°C)

-40 to 125

Power consumption (typ) (mW)

1.4

Analog supply voltage (min) (V)

-2.5, 2.3

Analog supply voltage (max) (V)

2.5, 5.5

Digital supply (min) (V)

2.3

Digital supply (max) (V)

5.5

Resolution (Bits)

16

Sample rate (max) (ksps)

2

Number of input channels

4

Interface type

I2C

Architecture

Delta-Sigma

Input type

Differential, Single-ended

Multichannel configuration

Multiplexed

Rating

Catalog

Reference mode

External, Internal

Input voltage range (max) (V)

2.85, 5.6

Input voltage range (min) (V)

-2.85, 0

Features

50/60 Hz Rejection, Excitation Current Sources (iDACs), Oscillator, PGA, Small Size, Temp Sensor

Operating temperature range (°C)

-40 to 125

Power consumption (typ) (mW)

1.4

Analog supply voltage (min) (V)

-2.5, 2.3

Analog supply voltage (max) (V)

2.5, 5.5

Digital supply (min) (V)

2.3

Digital supply (max) (V)

5.5

TSSOP (PW)

16

32 mm² (5 mm × 6.4 mm)

WQFN (RTE)

16

9 mm² (3 mm × 3 mm)

Current Consumption as Low as 315 µA (typ)
Wide Supply Range: 2.3 V to 5.5 V
Programmable Gain: 1 to 128
Programmable Data Rates: Up to 2 kSPS
16-Bit, Noise-Free Resolution at 20 SPS
Simultaneous 50-Hz and 60-Hz Rejection at 20 SPS With Single-Cycle Settling Digital Filter
Two Differential or Four Single-Ended Inputs
Dual-Matched Programmable Current Sources:
10 µA to 1.5 mA
Internal 2.048-V Reference: 5 ppm/°C (typ) Drift
Internal 2% Accurate Oscillator
Internal Temperature Sensor:
0.5°C (typ) Accuracy
I²C-Compatible Interface
Supported I²C Bus Speed Modes:
Standard-Mode, Fast-Mode, Fast-Mode Plus
16 Pin-Configurable I²C Addresses
Package: 3.0-mm × 3.0-mm × 0.75-mm WQFN

Current Consumption as Low as 315 µA (typ)
Wide Supply Range: 2.3 V to 5.5 V
Programmable Gain: 1 to 128
Programmable Data Rates: Up to 2 kSPS
16-Bit, Noise-Free Resolution at 20 SPS
Simultaneous 50-Hz and 60-Hz Rejection at 20 SPS With Single-Cycle Settling Digital Filter
Two Differential or Four Single-Ended Inputs
Dual-Matched Programmable Current Sources:
10 µA to 1.5 mA
Internal 2.048-V Reference: 5 ppm/°C (typ) Drift
Internal 2% Accurate Oscillator
Internal Temperature Sensor:
0.5°C (typ) Accuracy
I²C-Compatible Interface
Supported I²C Bus Speed Modes:
Standard-Mode, Fast-Mode, Fast-Mode Plus
16 Pin-Configurable I²C Addresses
Package: 3.0-mm × 3.0-mm × 0.75-mm WQFN

The ADS112C04 is a precision, 16-bit, analog-to-digital converter (ADC) that offers many integrated features to reduce system cost and component count in applications measuring small sensor signals. The device features two differential or four single-ended inputs through a flexible input multiplexer (MUX), a low-noise, programmable gain amplifier (PGA), two programmable excitation current sources, a voltage reference, an oscillator, and a precision temperature sensor.

The device can perform conversions at data rates up to 2000 samples-per-second (SPS) with single-cycle settling. At 20 SPS, the digital filter offers simultaneous 50-Hz and 60-Hz rejection for noisy industrial applications. The internal PGA offers gains up to 128. This PGA makes the ADS112C04 ideally suited for applications measuring small sensor signals, such as resistance temperature detectors (RTDs), thermocouples, thermistors, and resistive bridge sensors.

The ADS112C04 features a 2-wire, I²C-compatible interface that supports I²C bus speeds up to 1 Mbps. Two address pins allow selection of 16 different I²C addresses for the device.

The ADS112C04 is offered in a leadless 16-pin WQFN or a 16-pin TSSOP package and is specified over a temperature range of –40°C to +125°C.

The ADS112C04 is a precision, 16-bit, analog-to-digital converter (ADC) that offers many integrated features to reduce system cost and component count in applications measuring small sensor signals. The device features two differential or four single-ended inputs through a flexible input multiplexer (MUX), a low-noise, programmable gain amplifier (PGA), two programmable excitation current sources, a voltage reference, an oscillator, and a precision temperature sensor.

The device can perform conversions at data rates up to 2000 samples-per-second (SPS) with single-cycle settling. At 20 SPS, the digital filter offers simultaneous 50-Hz and 60-Hz rejection for noisy industrial applications. The internal PGA offers gains up to 128. This PGA makes the ADS112C04 ideally suited for applications measuring small sensor signals, such as resistance temperature detectors (RTDs), thermocouples, thermistors, and resistive bridge sensors.

The ADS112C04 features a 2-wire, I²C-compatible interface that supports I²C bus speeds up to 1 Mbps. Two address pins allow selection of 16 different I²C addresses for the device.

The ADS112C04 is offered in a leadless 16-pin WQFN or a 16-pin TSSOP package and is specified over a temperature range of –40°C to +125°C.

filter

Andere Präzisions-ADCs suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 15

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Datenblatt	ADS112C04 16-Bit, 4-Channel, 2-kSPS, Delta-Sigma ADC With I2C Interface datasheet (Rev. A)	PDF \| HTML	25.10.2018
	Anwendungshinweis	A Simple, Java-Based CRC Calculator	PDF \| HTML	04.03.2026
	Anwendungshinweis	Temperature Monitor for Power Modules and Power Electronic Parts		30.07.2025
	Application brief	Leak Detection, Flow, and Pressure Monitoring in Liquid-Cooled Server Cards and Coolant Distribution Units	PDF \| HTML	09.10.2024
	Anwendungshinweis	K-type thermocouple measurement circuit with precision ADC (Rev. A)	PDF \| HTML	20.09.2024
	Anwendungshinweis	Calculating Conversion Latency and System Cycle Time for Delta-Sigma ADCs (Rev. A)	PDF \| HTML	18.03.2024
	Anwendungshinweis	A Basic Guide to Bridge Measurements (Rev. A)	PDF \| HTML	13.03.2024
	Anwendungshinweis	A Basic Guide to RTD Measurements (Rev. A)	PDF \| HTML	29.03.2023
	Anwendungshinweis	Digital Filter Types in Delta-Sigma ADCs (Rev. A)	PDF \| HTML	29.03.2023
	Anwendungshinweis	A Basic Guide to Thermocouple Measurements (Rev. A)	PDF \| HTML	29.03.2023
	Anwendungshinweis	ADS124S08 3-Wire PT100 RTD Measurement Circuit w/ Low-Side Reference and 1 IDAC (Rev. B)		09.09.2021
	Anwendungshinweis	Communication Methods for Data Integrity Using Delta-Sigma Data Converters (Rev. A)	PDF \| HTML	23.08.2021
	Anwendungshinweis	RTD Wire-Break Detection Using Precision Delta-Sigma ADCs	PDF \| HTML	18.02.2021
	E-book	Fundamentals of Precision ADC Noise Analysis (Rev. A)		19.06.2020
	Application brief	Low-Cost, Single-Chip, Diff Temp Measurement Solution Using Delta-Sigma ADCs (Rev. A)		04.05.2018

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

ADS112C04EVM — ADS112C04-Evaluierungsmodul

Das ADS112C04-Evaluierungsmodul (EVM) ist eine Plattform zur Evaluierung des ADS112C04-Analog-Digital-Wandlers (Analog-to-Digital Converter, ADC). Das ADS112C04 ist ein Delta-Sigma-ADC mit 16 Bit, 2 kSPS, 4 Kanälen, geringem Stromverbrauch und einer UART-Schnittstelle für Sensormessungs- und (...)

Benutzerhandbuch: PDF