NEU

INA4235

AKTIV

Vierkanaliger, ultrapräziser 16 Bit-Wandler mit Strom, Spannung, Leistungs- und Energiemonitor mit I

Produktdetails

Common-mode voltage (max) (V) 48 Common-mode voltage (min) (V) -0.3 Input offset (±) (max) (µV) 10 Input offset drift (±) (max) (µV/°C) 0.025 Voltage gain (V/V) 1 CMRR (min) (dB) 130 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 1.7 Iq (max) (mA) 0.5 Digital interface I2C, SMBus Gain error (%) 0.1 Gain error drift (±) (max) (ppm/°C) 25 Features Alert Function, Bidirectional, Intergrated Power Monitor, Low-side Capable Number of channels 4 Resolution (Bits) 16 Power measurement accuracy (%) 0.8 Rating Catalog Operating temperature range (°C) -40 to 125
Common-mode voltage (max) (V) 48 Common-mode voltage (min) (V) -0.3 Input offset (±) (max) (µV) 10 Input offset drift (±) (max) (µV/°C) 0.025 Voltage gain (V/V) 1 CMRR (min) (dB) 130 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 1.7 Iq (max) (mA) 0.5 Digital interface I2C, SMBus Gain error (%) 0.1 Gain error drift (±) (max) (ppm/°C) 25 Features Alert Function, Bidirectional, Intergrated Power Monitor, Low-side Capable Number of channels 4 Resolution (Bits) 16 Power measurement accuracy (%) 0.8 Rating Catalog Operating temperature range (°C) -40 to 125
DSBGA (YBJ) 16 2.56 mm² 1.6 x 1.6
  • High-side or low-side current sensing
  • Operates from a 1.7V to 5.5V power supply
  • Reports current, voltage, power, and energy
  • Programmable full scale range: 20mV / 80mV
  • Input common mode range: –0.3V to 48V
  • Current monitoring accuracy:
    • 16-bit ADC resolution
    • 0.1% gain error (maximum)
    • 10µV offset (maximum)
  • Power monitoring accuracy:
    • 0.2% full scale (maximum)
  • Energy monitoring accuracy:
    • 0.7% full scale (maximum)
  • Low input bias currents: 5nA (maximum)
  • Low disable current: 50nA (maximum)
  • Configurable averaging options
  • Alert limits for over and under current events
  • 1.2V compliant I2C, SMBus interface
  • 16-pin selectable addresses
  • DSBGA-16 Package (1.5mm × 1.5mm)
  • High-side or low-side current sensing
  • Operates from a 1.7V to 5.5V power supply
  • Reports current, voltage, power, and energy
  • Programmable full scale range: 20mV / 80mV
  • Input common mode range: –0.3V to 48V
  • Current monitoring accuracy:
    • 16-bit ADC resolution
    • 0.1% gain error (maximum)
    • 10µV offset (maximum)
  • Power monitoring accuracy:
    • 0.2% full scale (maximum)
  • Energy monitoring accuracy:
    • 0.7% full scale (maximum)
  • Low input bias currents: 5nA (maximum)
  • Low disable current: 50nA (maximum)
  • Configurable averaging options
  • Alert limits for over and under current events
  • 1.2V compliant I2C, SMBus interface
  • 16-pin selectable addresses
  • DSBGA-16 Package (1.5mm × 1.5mm)

The INA4235 device is a quad channel 16-bit digital current monitor with an I2C/SMBus-compatible interface that is compliant with digital bus voltages from 1.2V to 5V. The device monitors the voltage across an external sense resistor and reports values for shunt voltage, bus voltage, current, power, and energy for each channel.

The INA4235 features programmable ADC conversion times and averaging that is common for all channels. Each channel has a programmable calibration value with an internal multiplier that enables direct readouts of current in amperes, power in watts, and energy in joules. Each channel monitors the bus voltage present on the IN– pin and can alert on overcurrent and undercurrent conditions, as well as on overvoltage and undervoltage conditions.High input impedance while in current measurement mode allows use of larger current sense resistors needed to measure small value system currents.

The INA4235 senses current on common-mode bus voltages that can vary from –0.3V to 48V, independent of the supply voltage. The device operates from a single 1.7V to 5.5V supply, drawing a typical supply current of 400µA in normal operation. The device can be placed in a low-power standby mode where the typical operating current is 2.5µA and can be fully disabled using the enable pin to achieve an supply current less than 50nA. The device is specified over the operating temperature range between –40°C and 125°C and features up to 16 programmable addresses.

The INA4235 device is a quad channel 16-bit digital current monitor with an I2C/SMBus-compatible interface that is compliant with digital bus voltages from 1.2V to 5V. The device monitors the voltage across an external sense resistor and reports values for shunt voltage, bus voltage, current, power, and energy for each channel.

The INA4235 features programmable ADC conversion times and averaging that is common for all channels. Each channel has a programmable calibration value with an internal multiplier that enables direct readouts of current in amperes, power in watts, and energy in joules. Each channel monitors the bus voltage present on the IN– pin and can alert on overcurrent and undercurrent conditions, as well as on overvoltage and undervoltage conditions.High input impedance while in current measurement mode allows use of larger current sense resistors needed to measure small value system currents.

The INA4235 senses current on common-mode bus voltages that can vary from –0.3V to 48V, independent of the supply voltage. The device operates from a single 1.7V to 5.5V supply, drawing a typical supply current of 400µA in normal operation. The device can be placed in a low-power standby mode where the typical operating current is 2.5µA and can be fully disabled using the enable pin to achieve an supply current less than 50nA. The device is specified over the operating temperature range between –40°C and 125°C and features up to 16 programmable addresses.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Typ Titel Datum
* Data sheet INA4235 48V, Quad Channel, 16-Bit, Ultra - Precise, Current, Voltage, Power, and Energy Monitor With an I2 C Interface datasheet PDF | HTML 30 Mai 2024
EVM User's guide INA423x Evaluation Module User's Guide PDF | HTML 21 Mär 2024

Design und Entwicklung

Bitte verwenden Sie für das Anzeigen des Abschnitts „Design & Entwicklung“ ein Desktopgerät.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos