OPA596

ACTIVO

Amplificador operacional de precisión de 85 V de alta velocidad (100 V/µs) a relación de potencia (4

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat OPAx596 High-Voltage (85V), Low-Power (420μA), High-Slew Rate (100V/μs) Power Amplifier With MUX-Friendly Inputs datasheet (Rev. C) (Inglés) PDF | HTML

OPA596

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

8

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

85

Iout (typ) (A)

0.03

GBW (typ) (MHz)

2.25

Slew rate (typ) (V/µs)

100

Vos (offset voltage at 25°C) (max) (mV)

1

Offset drift (typ) (µV/°C)

1

Iq per channel (typ) (mA)

0.425

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Input bias current (max) (pA)

15

CMRR (typ) (dB)

140

Rail-to-rail

In to V-, Out

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

8

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

85

Iout (typ) (A)

0.03

GBW (typ) (MHz)

2.25

Slew rate (typ) (V/µs)

100

Vos (offset voltage at 25°C) (max) (mV)

1

Offset drift (typ) (µV/°C)

1

Iq per channel (typ) (mA)

0.425

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Input bias current (max) (pA)

15

CMRR (typ) (dB)

140

Rail-to-rail

In to V-, Out

SOT-23 (DBV)

5

8.12 mm² (2.9 mm × 2.8 mm)

High slew rate: 100V/µs
Low power consumption: 420µA
Wide power-supply range:
- ±4V to ±42.5V
- 8V to 85V
MUX-friendly inputs
Input below the negative rail
Rail-to-rail output
Gain bandwidth: 3.75MHz
Low noise: 12.8nV/√Hz
Low input bias current: 5pA
Low input offset voltage: ±1mV
Output current drive: ±30mA
Wide temperature range: –40°C to +125°C
Industry-standard small packages:
- D (8-pin SOIC)
- DBV (5-pin SOT-23)
- DGK (8-pin VSSOP)

High slew rate: 100V/µs
Low power consumption: 420µA
Wide power-supply range:
- ±4V to ±42.5V
- 8V to 85V
MUX-friendly inputs
Input below the negative rail
Rail-to-rail output
Gain bandwidth: 3.75MHz
Low noise: 12.8nV/√Hz
Low input bias current: 5pA
Low input offset voltage: ±1mV
Output current drive: ±30mA
Wide temperature range: –40°C to +125°C
Industry-standard small packages:
- D (8-pin SOIC)
- DBV (5-pin SOT-23)
- DGK (8-pin VSSOP)

The OPA596 and OPA2596 (OPAx596) are high-voltage (85V), high slew rate (100V/µs), micro-power (420µA), unity-gain stable operational amplifiers.

The OPAx596 enable the next generation of high-voltage systems, such as output load drivers in semiconductor test and digital power supplies by increasing the output voltage of the system though high-gain configurations. Low power consumption and industry-standard small packages allow the device to be used in high-density systems that are size constrained, while reducing the thermal management requirements for the system.

Through proprietary design techniques, the OPAx596 are capable of a very high slew rate with minimal power consumption to improve large-signal settling time and maximize the effective large-signal bandwidth. These devices also offers MUX-friendly inputs that enable large differential voltage (up to 85V) and help improve settling behavior when compared to traditional inputs in multiplexed applications.

The OPAx596 are available in industry-standard packages and operates across the temperature range of –40°C to +125°C.

The OPA596 and OPA2596 (OPAx596) are high-voltage (85V), high slew rate (100V/µs), micro-power (420µA), unity-gain stable operational amplifiers.

The OPAx596 enable the next generation of high-voltage systems, such as output load drivers in semiconductor test and digital power supplies by increasing the output voltage of the system though high-gain configurations. Low power consumption and industry-standard small packages allow the device to be used in high-density systems that are size constrained, while reducing the thermal management requirements for the system.

Through proprietary design techniques, the OPAx596 are capable of a very high slew rate with minimal power consumption to improve large-signal settling time and maximize the effective large-signal bandwidth. These devices also offers MUX-friendly inputs that enable large differential voltage (up to 85V) and help improve settling behavior when compared to traditional inputs in multiplexed applications.

The OPAx596 are available in industry-standard packages and operates across the temperature range of –40°C to +125°C.

filter

Buscar otro/a Amplificadores operacionales de potencia

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Pin por pin con la misma funcionalidad que el dispositivo comparado

NUEVO OPA591

PRESENTACIÓN PRELIMINAR

Amp. de precisión (comp. de 100 µV), único, de 85 V, con alta relación vel.-pot. (100 V/µs a 400 Higher precision variant with lower offset voltage (0.1mV) and offset voltage drift (0.3µV/°C)

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

Documentación principal	Tipo	Título	Opciones de formato	Descargar la versión más reciente en inglés	Fecha
*	Hoja de datos	OPAx596 High-Voltage (85V), Low-Power (420μA), High-Slew Rate (100V/μs) Power Amplifier With MUX-Friendly Inputs datasheet (Rev. C)	PDF \| HTML		22/12/2025
	Application brief	Biasing an APD With OPA596	PDF \| HTML		9/02/2026

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DIYAMP-EVM — Módulo de evaluación de circuito de amplificador universal “Hazlo tú mismo (DIY)”

El DIYAMP-EVM es una familia de módulos de evaluación (EVM) que proporciona a ingenieros y aficionados al DIY con circuitos de amplificación reales, lo que permite evaluar rápidamente conceptos de diseño y verificar simulaciones. Está disponible en tres encapsulados estándar de la industria (SC70, (...)

Guía del usuario: PDF | HTML