SPRUJC6A December 2024 – July 2025 AM2752-Q1 , AM2754-Q1
VTM miscellaneous control bits.
Return to Summary Table
| Instance Name | Physical Address |
|---|---|
| WKUP_VTM0 | 00B0 100Ch |
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 |
| RESERVED | |||||||
| NONE | |||||||
| 0h | |||||||
| 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
| RESERVED | |||||||
| NONE | |||||||
| 0h | |||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 |
| RESERVED | |||||||
| NONE | |||||||
| 0h | |||||||
| 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| RESERVED | ANY_MAXT_OUTRG_ALERT_EN | ||||||
| NONE | R/W | ||||||
| 0h | 0h | ||||||
| Bit | Field | Type | Reset | Description |
|---|---|---|---|---|
| 31:1 | RESERVED | NONE | 0h | Reserved |
| 0 | ANY_MAXT_OUTRG_ALERT_EN | R/W | 0h | This bit when enabled will cause the VTM's output therm_maxtemp_outrange_alert to be driven high, if any of the sources for the maxt_outrg_alert, is set high. Whenever all the maxt_outrg_alert enabled sensor alerts, out of the 8 possible are back to 0 then the output, therm_maxtemp_outrange_alert, will also return to 0. Reset is at POR only. Reset Source: mod_por_rst_n |