SPRUJC6A December 2024 – July 2025 AM2752-Q1 , AM2754-Q1
BIST, hsrx data
Return to Summary Table
| Instance Name | Physical Address |
|---|---|
| USB0 | 0F90 8294h |
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 |
| RESERVED | |||||||
| NONE | |||||||
| 0h | |||||||
| 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
| RESERVED | |||||||
| NONE | |||||||
| 0h | |||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 |
| RESERVED | |||||||
| NONE | |||||||
| 0h | |||||||
| 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| BIST_MODE_EN | BIST_ON | HSTX_BOOST_DEAMP_OFF | HSTX_BOOST | HS_SAMP | HS_SAMP_EN | HSRX | HSRX_EN |
| R/W | R/W | R/W | R/W | R/W | R/W | R/W | R/W |
| 0h | 0h | 0h | 0h | 0h | 0h | 0h | 0h |
| Bit | Field | Type | Reset | Description |
|---|---|---|---|---|
| 31:8 | RESERVED | NONE | 0h | Reserved |
| 7 | BIST_MODE_EN | R/W | 0h | 0 BIST mode en is taken from primary input port- bist_mode_en, 1 bist_mode_en is turned on. Reset Source: usb2_sync_preset_n |
| 6 | BIST_ON | R/W | 0h | 0 BIST on is taken from primary input port- bist_on, 1 bist_on is enabled. Reset Source: usb2_sync_preset_n |
| 5 | HSTX_BOOST_DEAMP_OFF | R/W | 0h | This is a reserved register or field. It should not be written or read, and the value should be ignored. Reset Source: usb2_sync_preset_n |
| 4 | HSTX_BOOST | R/W | 0h | This is a reserved register or field. It should not be written or read, and the value should be ignored. Reset Source: usb2_sync_preset_n |
| 3 | HS_SAMP | R/W | 0h | This is a reserved register or field. It should not be written or read, and the value should be ignored. Reset Source: usb2_sync_preset_n |
| 2 | HS_SAMP_EN | R/W | 0h | This is a reserved register or field. It should not be written or read, and the value should be ignored. Reset Source: usb2_sync_preset_n |
| 1 | HSRX | R/W | 0h | This is a reserved register or field. It should not be written or read, and the value should be ignored. Reset Source: usb2_sync_preset_n |
| 0 | HSRX_EN | R/W | 0h | This is a reserved register or field. It should not be written or read, and the value should be ignored. Reset Source: usb2_sync_preset_n |