MSP430F5529

ACTIVE

25 MHz MCU with 128KB Flash, 8KB SRAM, 12-bit ADC, Comparator, DMA, UART/SPI/I2C, USB, HW Multiplier

Top

Product details

Parameters

Features Real-Time Clock Non-volatile memory (kB) 128 RAM (KB) 8 ADC 12-bit SAR ADC: channels (#) 14 GPIO pins (#) 63 I2C 2 SPI 4 UART 2 Comparator channels (#) 12 Approx. price (US$) 2.99 | 1ku Timers - 16-bit 4 Bootloader (BSL) USB Special I/O Operating temperature range (C) -40 to 85 Rating Catalog open-in-new Find other MSP430 ultra-low-power MCUs

Package | Pins | Size

LQFP (PN) 80 196 mm² 14 x 14 open-in-new Find other MSP430 ultra-low-power MCUs

Features

  • Low Supply Voltage Range:
    3.6 V Down to 1.8 V
  • Ultra-Low Power Consumption
    • Active Mode (AM):
      • All System Clocks Active:
        • 290 µA/MHz at 8 MHz, 3.0 V, Flash Program Execution (Typical)
        • 150 µA/MHz at 8 MHz, 3.0 V, RAM Program Execution (Typical)
    • Standby Mode (LPM3):
      • Real-Time Clock (RTC) With Crystal, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wakeup:
        • 1.9 µA at 2.2 V, 2.1 µA at 3.0 V (Typical)
      • Low-Power Oscillator (VLO), General-Purpose Counter, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wakeup:
        • 1.4 µA at 3.0 V (Typical)
    • Off Mode (LPM4):
      • Full RAM Retention, Supply Supervisor Operational, Fast Wakeup:
        • 1.1 µA at 3.0 V (Typical)
    • Shutdown Mode (LPM4.5):
      • 0.18 µA at 3.0 V (Typical)
  • Wake up From Standby Mode in 3.5 µs (Typical)
  • 16-Bit RISC Architecture, Extended Memory, up to 25-MHz System Clock
  • Flexible Power-Management System
    • Fully Integrated LDO With Programmable Regulated Core Supply Voltage
    • Supply Voltage Supervision, Monitoring, and Brownout
  • Unified Clock System
    • FLL Control Loop for Frequency Stabilization
    • Low-Power Low-Frequency Internal Clock Source (VLO)
    • Low-Frequency Trimmed Internal Reference Source (REFO)
    • 32-kHz Watch Crystals (XT1)
    • High-Frequency Crystals up to 32 MHz (XT2)
  • 16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers
  • 16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers
  • 16-Bit Timer TA2, Timer_A With Three Capture/Compare Registers
  • 16-Bit Timer TB0, Timer_B With Seven Capture/Compare Shadow Registers
  • Two Universal Serial Communication Interfaces
    • USCI_A0 and USCI_A1 Each Support:
      • Enhanced UART Supports Automatic Baud-Rate Detection
      • IrDA Encoder and Decoder
      • Synchronous SPI
    • USCI_B0 and USCI_B1 Each Support:
      • I2C
      • Synchronous SPI
  • Full-Speed Universal Serial Bus (USB)
    • Integrated USB-PHY
    • Integrated 3.3-V and 1.8-V USB Power System
    • Integrated USB-PLL
    • Eight Input and Eight Output Endpoints
  • 12-Bit Analog-to-Digital Converter (ADC) (MSP430F552x Only) With Internal Reference, Sample-and-Hold, and Autoscan Feature
  • Comparator
  • Hardware Multiplier Supports 32-Bit Operations
  • Serial Onboard Programming, No External Programming Voltage Needed
  • 3-Channel Internal DMA
  • Basic Timer With RTC Feature
  • Device Comparison Summarizes Available Family Members

All trademarks are the property of their respective owners.

open-in-new Find other MSP430 ultra-low-power MCUs

Description

The TI MSP430™ family of ultra-low-power microcontrollers consists of several devices featuring peripheral sets targeted for a variety of applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The microcontroller features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the devices to wake up from low-power modes to active mode in 3.5 µs (typical).

The MSP430F5529, MSP430F5527, MSP430F5525, and MSP430F5521 microcontrollers have integrated USB and PHY supporting USB 2.0, four 16-bit timers, a high-performance 12-bit analog-to-digital converter (ADC), two USCIs, a hardware multiplier, DMA, an RTC module with alarm capabilities, and 63 I/O pins. The MSP430F5528, MSP430F5526, MSP430F5524, and MSP430F5522 microcontrollers include all of these peripherals but have 47 I/O pins.

The MSP430F5519, MSP430F5517, and MSP430F5515 microcontrollers have integrated USB and PHY supporting USB 2.0, four 16-bit timers, two USCIs, a hardware multiplier, DMA, an RTC module with alarm capabilities, and 63 I/O pins. The MSP430F5514 and MSP430FF5513 microcontrollers include all of these peripherals but have 47 I/O pins.

Typical applications include analog and digital sensor systems, data loggers, and others that require connectivity to various USB hosts.

For complete module descriptions, see the MSP430F5xx and MSP430F6xx Family User’s Guide

open-in-new Find other MSP430 ultra-low-power MCUs
Download

Technical documentation

= Featured
No results found. Please clear your search and try again. View all 37
Type Title Date
* Datasheet MSP430F552x, MSP430F551x Mixed-Signal Microcontrollers datasheet (Rev. N) Sep. 20, 2018
* Errata MSP430F5529 Device Erratasheet (Rev. AC) Apr. 24, 2019
* User guides MSP430x5xx and MSP430x6xx Family User's Guide (Rev. Q) Aug. 17, 2018
Application notes Time of Flight and LIDAR - Optical Front End Design Feb. 04, 2020
Application notes MSP430 System-Level ESD Considerations (Rev. A) Jan. 13, 2020
Application notes MSP430 System ESD Troubleshooting Guide Dec. 13, 2019
Technical articles Leveraging MSP430™ FRAM MCUs with integrated configurable analog in modern-day factories Aug. 30, 2019
Application notes ESD Diode Current Specification (Rev. A) Jul. 10, 2019
More literature Voltage Supervisor and Reset ICs: Tips, Tricks and Basics Jun. 28, 2019
Application notes Programming a Flash-Based MSP430 MCU Using the JTAG Interface (Rev. H) Mar. 15, 2019
White papers The ultra-low-power USB revolution (Rev. A) Feb. 26, 2019
Technical articles Searching for the newest innovations in power? Find them at APEC Feb. 08, 2019
Application notes Starting a USB Design Using MSP430 MCUs (Rev. B) Oct. 19, 2018
Application notes Understanding MSP430 Flash Data Retention (Rev. A) Aug. 24, 2018
Application notes Mixing C and Assembler With MSP430™ MCUs (Rev. A) Aug. 07, 2018
Application notes Using the TPS3619 With MSP430 Microcontrollers (Rev. B) Aug. 06, 2018
Application notes Random Number Generation Using MSP430™ MCUs (Rev. A) May 16, 2018
Application notes Software Coding Techniques for MSP430™ MCUs (Rev. B) Mar. 14, 2018
Application notes Solutions to Common eUSCI and USCI Serial Communication Issues on MSP430 MCUs (Rev. A) Mar. 01, 2018
Application notes Migrating to the SimpleLink™ MSP432™ Family (Rev. D) Oct. 19, 2017
Application notes Troubleshooting Guidelines for MSP Devices Oct. 04, 2017
User guides SYS/BIOS (TI-RTOS Kernel) User's Guide (Rev. T) Oct. 01, 2017
Application notes MSP430 32-kHz Crystal Oscillators (Rev. D) Jul. 18, 2017
Technical articles FRAM or flash: How to select the right MCU for your application Jun. 22, 2017
Technical articles Top 6 ways DIYers are making the world more fun! May 23, 2017
Application notes Debugging Flash Issues on the MSP430 Family of Microcontrollers (Rev. A) Mar. 16, 2017
Application notes Migrating from the MSP430F5xx,F6xx Family to the MSP430FR58xx/FR59xx/68xx Family (Rev. D) Nov. 03, 2016
Application notes Advanced Debugging Using the Enhanced Emulation Module (EEM) With CCS v6 (Rev. F) Sep. 06, 2016
Application notes General Oversampling of MSP ADCs for Higher Resolution (Rev. A) Apr. 01, 2016
User guides Safety Manual for MSP430G2xx, F5xx, and FR57xx in IEC 60730 Safety Applications (Rev. A) Jan. 12, 2016
Application notes MSP Code Protection Features Dec. 07, 2015
Application notes Using the USCI I2C Master (Rev. A) Mar. 11, 2015
Application notes USB Field Firmware Updates on MSP430 MCUs (Rev. C) Nov. 12, 2014
More literature RFID BoosterPack TRF7970ABP With MSP430F5529 LaunchPad (PPT) Dec. 10, 2013
White papers Ultra-low power USB for portable embedded applications May 29, 2013
Application notes Creating Autoplay Installers Using MSP430F5529 and CDFS Mar. 14, 2012
Application notes Implementing a Thermocouple Interface With ADC12_A Jul. 19, 2011

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
$149.00
Description
The bq40z80 EVM includes one bq40z80, two bq771807 secondary protectors, and a link to Microsoft Windows based PC software, which can be used to monitor and predict capacity, perform cell balancing, monitor critical parameters, protect the cells from overcharge, over-discharge, short circuit, and (...)
Features
  • 2s-7s battery gauging with protection
  • Supports internal and external cell balancing
  • Multiple GPIOs and LED support
  • Protection features include:
    • Oover and under voltage
    • Short circuit in charge and discharge
    • Charge and pre-charge timeout
    • Over and under temperaure
EVALUATION BOARDS Download
document-generic User guide
$249.00
Description
The BQ76942EVM evaluation module (EVM) is a complete evaluation system for the BQ76942, a 3-cell to 10-cell Li-Ion battery monitor integrated circuit. The EVM consists of a BQ76942 circuit module which is used for simple evaluation of the BQ76942 monitor function. The circuit module includes one (...)
Features
  • Complete evaluation system for the BQ76942 3-cell to 10-cell Li-Ion and Phosphate battery monitor
  • Populated circuit module for 10-cell configuration for quick setup
  • Communication available with included USB interface adapter or available on 4-pin connector
  • Resistor cell simulator for operation with (...)
EVALUATION BOARDS Download
document-generic User guide
$249.00
Description
The BQ76952EVM evaluation module (EVM) is a complete evaluation system for the BQ76952, a 3-cell to 16-cell Li-Ion battery monitor integrated circuit. The EVM consists of a BQ76952 circuit module which is used for simple evaluation of the BQ76952 monitor function. The circuit module includes one (...)
Features
  • Complete evaluation system for the BQ76952 3-cell to 16-cell Li-Ion and Phosphate battery monitor
  • Populated circuit module for 16-cell configuration for quick setup
  • Communication available with included USB interface adapter or available on 4-pin connector
  • Resistor cell simulator for operation with (...)
EVALUATION BOARDS Download
document-generic User guide
$399.00
Description
The LMK05318EVM is an evaluation module for the LMK05318 Network Synchronizer Clock device.
The EVM can be used as a flexible, synchronous clock source for rapid evaluation, compliance testing, and system prototyping.  SMA ports provide access to the LMK05318 clock inputs and outputs for (...)
Features
  • One Digital PLL (DPLL) with programmable bandwidths and Two Fractional Analog PLLs (APLLs) for Flexible Clock Generation
  • Two reference inputs to the DPLL supporting hitless switching & holdover
  • Eight output clocks with 50-fs RMS phase jitter (12 kHz to 20 MHz)
  • On-chip EEPROM for custom start-up clock (...)
EVALUATION BOARDS Download
document-generic User guide
$175.00
Description

Special Note:

The MSP430F5529 USB microcontroller development kit is not supported by the Mac or Linux versions of the Code Composer Studio™ Integrated Development Environment. If you want to work with these operating systems, we suggest you select one of the many MSP LaunchPads.  

The MSP430F5529 (...)

Features
  • Integrated MSP430F5529:
    • 128KB Flash / 8KB SRAM (10kB if USB is disabled)
    • Full-Speed USB 2.0
    • 16-Bit RISC Architecture up to 25-MHz
    • 3x Timer_A Blocks, 1x Timer_B Block
    • 2x USCI (UART/SPI/I2C) Blocks, 16Ch 12-Bit ADC12_A, 12Ch Comp_B, 63 I/Os
  • USB Development Platform
  • 5-pad capacitive touch strip (button or (...)
DEVELOPMENT KITS Download
document-generic User guide
$12.99
Description

To get started developing:
Step 1: Buy Launchpad
Step 2: Download User Guide
Step 3: Get to know MSP430 through our MSP430 Workshop Series

Develop low power, PC-connected applications with integrated Full-speed USB 2.0 (HID/MSC/CDC).  The MSP-EXP430F5529LP LaunchPad is an inexpensive, simple (...)

Features
  • USB 2.0-enabled MSP430F5529 16-bit MCU
  • Up to 25 MHz
  • 128KB Flash and 8KB RAM
  • 12 Bit SAR ADC
  • Various USB device class examples and embedded software libraries available (CDC, HID, MSC)
  • eZ-FET lite: Open source onboard debugger with application UART
  • One USB connection for emulator and target via the use of (...)
DEVELOPMENT KITS Download
document-generic User guide
$89.00
Description

The MSP-TS430PN80USB is a standalone 80-pin ZIF socket target board used to program and debug the MSP MCU in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol.

Device Support: The MSP-TS430PN80USB development kit supports MSP430F551x and MSP430F552x MCUs in an 80-pin LQFP (...)

Features

 

  • Development board (MSP-TS430PN80USB) with a 80-pin ZIF socket fitting MSP MCUs in 80-pin TQFP (PN) packages includes an LED indicator, JTAG adapter, and header pin-outs for prototyping
  • Supports all debugging interfaces using a standard 14-pin JTAG header such as the MSP-FET
  • Additional Features:
    • What's (...)
DEVELOPMENT KITS Download
document-generic User guide
$117.00
Description

The MSP-TS430RGC64USB is a standalone 64-pin ZIF socket target board used to program and debug the MSP430 MCU in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol.

Device Support: The MSP-TS430RGCUSB development board supports MSP430F550x, MSP430F551x and MSP430F552x MCUs in (...)

Features

 

  • Development board (MSP-TS430RGC64USB) MSP-TS430RGC64USB with a 64-pin ZIF socket fitting MSP430 derivatives in 64-pin QFN (RGC) packages includes an LED indicator, JTAG adapter, and header pin-outs for prototyping.
  • Supports all debugging interfaces using a standard 14-pin JTAG header such as the (...)
INTERFACE ADAPTERS Download
document-generic User guide
$99.00
Description

The DPS-DONGLE-EVM is an interface adapter between a PC and a high speed interface slave device. Communication between the PC and the interface adapter’s MSP430F5529 MCU is accomplished via a standard USB-to-miniUSB cable. The MCU then communicates to the slave device via SMBus or SPI interface.

Features
  • Designed specifically for use with the SigCon Architect GUI
  • Supports SMBus or SPI interfaces
  • No external power source required
  • 3.3-V optional output

 

Software development

SOFTWARE DEVELOPMENT KITS (SDK) Download
MSP430Ware for MSP Microcontrollers
MSPWARE MSP430Ware is a collection of resources that help users to effectively create and build MSP430 code. These resources support ALL MSP430 microcontrollers (MCUs). As one user mentioned, “It’s essentially everything developers need to become MSP430 microcontroller experts!”

This complete collection of (...)

Features
  • Collection of MSP design resources
  • Available within CCS, as a standalone executable, or as part of TI’s new Cloud-based tools
  • Auto-updates through the web
  • Sleek & intuitive GUI for browsing content
  • Features the MSP Driver Library
  • Automatic filtering of content using a unique 2-pane view
APPLICATION SOFTWARE & FRAMEWORKS Download
IEC60730 Software Package
MSP430-IEC60730-SW-PACKAGE The IEC60730 MSP430 software package was developed to be useful in assisting customers in complying with IEC 60730-1:2010 (Automatic Electrical Controls for Household and Similar Use – Part 1: General Requirements) for up to Class B products, which includes home appliances, arc detectors (...)
Features
Supports testing these parts:
  • MSP430G23xx
  • MSP430G24xx
  • MSP430G25xx
  • MSP430G2x44
  • MSP430G2x55
  • MSP430F5xx
  • MSP430FR2433
  • MSP430FR25xx
  • MSP430FR26xx
  • MSP430FR57xx
APPLICATION SOFTWARE & FRAMEWORKS Download
MSP430 USB Developers Package
MSP430USBDEVPACK Note: This software is available as part of MSPWare. If you have downloaded and installed the latest version of MSPWare, then you already have this USB software development package.

The USB Developers Package for MSP430 is a software package containing all necessary source code and sample (...)

Features
  • MSP430 API Code Stacks - Contains all necessary API's and examples to get started with USB development, using the CDC (Communications Device Class), HID (Human Interface Device) and MSC (Mass Storage Class) classes. The USB API also supports composite devices where a single physical device contains (...)
DRIVERS & LIBRARIES Download
Digital Signal Processing (DSP) Library for MSP430 Microcontrollers
MSP-DSPLIB — The Texas Instruments MSP430™ Digital Signal Processing library is a set of highly optimized functions to perform many common signal processing operations on fixed-point numbers for MSP430 microcontrollers. This function set is typically used in applications where processing-intensive (...)
DRIVERS & LIBRARIES Download
Fixed Point Math Library for MSP
MSP-IQMATHLIB The Texas Instruments® MSP IQmath and Qmath Libraries are a collection of highly optimized and high-precision mathematical functions for C programmers to seamlessly port a floating-point algorithm into fixed-point code on MSP430 and MSP432 devices. These routines are typically used in (...)
Features
  • Optimized fixed point functions - reduce development time and enable developers to focus on optimizing application code
  • Up to 100x higher performance when executing common fixed point scalar math functions in CCS – this means the MSP microcontroller can remain in low power modes longer than (...)
DRIVERS & LIBRARIES Download
Bootloader (BSL) for MSP low-power microcontrollers
MSPBSL Below are the steps needed in order to both understand and use the MSPBSL effectively across the MSP portfolio. For the most up to date information on what features the BSL on your device supports or which interface methods are needed to communicate with the BSL, please see “TABLE 1. Overview (...)
DRIVERS & LIBRARIES Download
MSP Driver Library
MSPDRIVERLIB Driver Library's abstracted API keeps you above the bits and bytes of the MSP430 and MSP432 hardware by providing easy-to-use function calls. Thorough documentation is delivered through a helpful API Guide, which includes details on each function call and the recognized parameters. Developers can (...)
Features
  • Software APIs that abstract away the details of the device’s hardware registers
  • Licensed BSD
  • Examples showing how to use DriverLib APIs in your project
  • Complete API guide available in PDF and html formats
  • Integration with CCS and TI Resource Explorer when using MSPWare
DRIVERS & LIBRARIES Download
Floating Point Math Library for MSP430
MSPMATHLIB Continuing to innovate in the low power and low cost microcontroller space, TI brings you MSPMATHLIB. Leveraging the intelligent peripherals of our devices, this floating point math library of scalar functions brings you up to 26x better performance.

Mathlib is easy to integrate into your designs. (...)

Features
  • Up to 26x higher performance when executing floating point scalar math functions
  • Remains in low power modes longer due to the increased performance
  • Free and easy to use –  now integrated in CCS and IAR
IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
Code Composer Studio™ Integrated Development Environment for MSP Microcontrollers
CCSTUDIO-MSP

Code Composer Studio is an integrated development environment (IDE) that supports TI's Microcontroller and Embedded Processors portfolio. Code Composer Studio comprises a suite of tools used to develop and debug embedded applications. It includes an optimizing C/C++ compiler, source code editor (...)

IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
Energia
ENERGIA Energia is an open source & community-driven integrated development environment (IDE) & software framework. Based on the Wiring framework, Energia provides an intuitive coding environment as well as a robust framework of easy-to-use functional APIs & libraries for programming a (...)
Features
  • Simple & easy-to-use code editor & compiler with built-in Serial Monitor/terminal
  • Features a robust framework of intuitive functional APIs for controlling microcontroller peripherals (i.e. digitalRead, digitalWrite, Serial.print, etc)
  • Support for various TI embedded devices (MSP430, TM4C, CC3200 (...)
IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
EnergyTrace Technology
ENERGYTRACE EnergyTrace™ software for MSP430™ MCUs, MSP432™ MCUs, CC13xx wireless MCUs and CC26xx wireless MCUs is an energy-based code analysis tool that measures and displays the energy profile of an application and helps optimize it for ultra-low-power consumption.

As most developers know, it is difficult to (...)

Features
  • Current measurement is enabled for all MSP430 MCUs, MSP432 MCUs and connectivity devices
  • Tracing of CPU states is available on selected MSP430 MCUs, MSP432 MCUs, CC13x2 wireless MCUs and CC26x2 wireless MCUs 
  • Tracing of peripheral states is also available on selected MSP430 MCUs, CC13x2 (...)
IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
GCC - Open Source Compiler for MSP Microcontrollers
MSP430-GCC-OPENSOURCE MSP430™ and MSP432™ GCC open source packages are complete debugger and open source C/C++ compiler toolchains for building and debugging embedded applications based on MSP430 and MSP432 microcontrollers. These free GCC compilers support all MSP430 and MSP432 devices without code size limitations. In (...)
Features
  • Available standalone or integrated within Code Composer Studio™
  • No Code Size Limitation
  • Free and Open-source
IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
ULP (Ultra-Low Power) Advisor
ULPADVISOR ULP (Ultra-Low Power) Advisor is a tool for guiding developers to write more efficient code to fully utilize the unique ultra-low power features of MSP and MSP432 microcontrollers. Aimed at both experienced and new microcontroller developers, ULP Advisor checks your code against a thorough ULP (...)
Features
  • Seamless tool that provides easy-to-understand remarks for creating power-efficient code for all MSP devices
  • Checks your code against a thorough ULP checklist
  • Built in to Code Composer Studio and also available as a standalone executable
  • Supports all MSP devices
  • Wiki-based social online community for (...)
IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
IAR Embedded Workbench
Provided by IAR Systems IAR Embedded Workbench for MSP430 (EW430)
IAR Embedded Workbench for MSP430 is a complete debugger and C/C++ compiler toolchain for building and debugging embedded applications based on MSP430 microcontrollers. The Debugger is a fully integrated debugger for source and disassembly level debugging (...)
PROGRAMMING TOOLS Download
MSP MCU Programmer and Debugger
MSP-FET To get started developing:
Step 1: Buy the MSP-FET 
Step 2: Refer to the debuggers user’s guide and hardware user’s guide.
Step 3: Refer to debugging video

**The second generation of the MSP-FET is supported in the IDEs since Code Composer Studio™ v7.0, IAR EW430 v7.1 and IAR EWAR v8.10. For use (...)

$115.00
Features
  • USB debugging interface to connect any MSP430 MCU to a computer for real-time, in-system programming and debugging
  • Enables EnergyTrace™ technology for energy measurement and debugging on all MSP430 and MSP432 devices in the Code Composer Studio and IAR Embedded Workbench development environments
  • (...)
PROGRAMMING TOOLS Download
MSP-GANG Production Programmer
MSP-GANG The MSP Gang Programmer is a MSP430/MSP432 device programmer that can program up to eight identical MSP430/MSP432 Flash or FRAM devices at the same time. The MSP Gang Programmer connects to a host PC using a standard RS-232 or USB connection and provides flexible programming options that allow the (...)
Features
  • Quickly and reliably program Flash or FRAM-based MSP devices via RS-232 or USB interface
  • Several programming modes:
    • Interactive Mode – Programming while connected to PC using the MSP GANG Programmer GUI
    • Program from Image – An image can be stored, which contains configuration options and code (...)
PROGRAMMING TOOLS Download
MSP Flasher - Command Line Programmer
MSP430-FLASHER MSP Flasher is an open-source, shell-based interface for programming MSP430™ microcontrollers (MCUs) and SimpleLink™ MSP432™ MCUs  through a MSP Debug Stack and provides the most common functions on the command line. MSP Flasher can be used to download binary files (.txt/.hex) directly to the MSP (...)
PROGRAMMING TOOLS Download
UniFlash stand-alone flash tool for microcontrollers, Sitara™; processors and SimpleLink™
UNIFLASH Supported devices: CC13xx, CC25xx, CC26xx, CC3220, CC3120, CC3235, CC3135, Tiva, C2000, MSP43x, Hercules, PGA9xx, IWR12xx, IWR14xx, IWR16xx, IWR18xx , IWR68xx, AWR12xx, AWR14xx, AWR16xx, AWR18xx.  Command line only: AM335x, AM437x, AM571x, AM572x, AM574x, AM65XX, K2G

CCS Uniflash is a standalone tool (...)

SUPPORT SOFTWARE Download
SLAC300L.ZIP (240 KB)

Design tools & simulation

CAD/CAE SYMBOLS Download
SLAC060E.ZIP (97 KB)

Reference designs

REFERENCE DESIGNS Download
EMC-compliant 10/100-Mbps Ethernet PHY reference design with IEEE802.3at Type-1 (≤ 12.95 W) PoE-PD
TIDA-010046 — This reference design provides a cost-optimized solution for 10 to 100 Mbps using the low-power Ethernet physical layer (PHY) DP83825 supporting 150-m reach over CAT5e cable which is beyond the standard Ethernet distance limitation of 100 m (328 feet). This design also demonstrates power (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Near Field Communication (NFC) Reader/Writer Reference Design
TIDM-NFC-RW This Near Field Communication (NFC) reference design provides a firmware example for the implementation of an NFC Reader/Writer application using the TRF7970A NFC transceiver. This reference design provides a number of easy-to-use Application Programming Interfaces (APIs), which allow users to (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Configurable Stepper Driver for HVAC Louver and Motor Control Reference Design
TIDA-01329 — This reference design provides a flexible stepper motor system designed to drive up to two stepper motors, or 8 peripherals, while reducing the number of GPIOs needed from the host controller reducing overall cost. The system is suitable for applications requiring stepper motors or coils up to 50V (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Ultra Mobile, Low Power DLP® Pico™ qHD Display Reference Design
TIDA-080002 — The 0.23 qHD DLP chipset is an affordable platform enabling the use of DLP technology with embedded host processor. This chipset is incorporated in to this reference design to enable a low power, on-demand free-form sub-system display for a variety of applications.
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Copper-to-fiber 100BASE-FX or 1000BASE-X media converter reference design for grid applications
TIDA-00306 This reference design details a methodology to use the DP83849 evaluation board to implement a 10/100BASE-TX to 10/100BASE-FX media converter, which enables copper based legacy equipment to be easily connected to a fiber network. Copper based Ethernet (10/100BASE-TX) has been widely used in grid (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
3D Printer Controller (12V)
TIDA-00405 This design is a complete system for controlling 3-axis, single extruder-based 3D printers. The system is managed by the MSP430F5529 LaunchPad and utilizes the DRV8846 for precision stepper motor control. The CSD18534Q5A is used as a low-side switch for the hot bed heater, extruder heater, and (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Near Field Communication (NFC) Card Emulation Reference Design
TIDM-NFC-CE This Near Field Communication (NFC) reference design provides a firmware example for the implementation of an NFC Card Emulation application using the TRF7970A NFC transceiver. This reference design provides a small number of easy to use Application Programming Interfaces (APIs) which allow users to (...)
document-generic Schematic
REFERENCE DESIGNS Download
NFC Active and Passive Peer to Peer Communication Reference Design
TIDM-NFC-P2P This Near Field Communication (NFC) reference design provides a firmware example for implementing an NFC Peer to Peer (P2P) application. It is used for showing the application developer the correct way to implement a robust peer-to-peer project using the TRF7970A in both active and passive modes (...)
document-generic Schematic
REFERENCE DESIGNS Download
High-Resolution, Low-Drift, Precision Weigh-Scale Reference Design with AC Bridge Excitation
TIPD188 This precision weigh-scale reference design achieves greater than 50,000 noise-free counts of resolution. Offset and offset drift errors are nearly eliminated by ac bridge excitation. This design takes advantage of the high-resolution ADS1262 delta-sigma ADC.
document-generic Schematic document-generic User guide
Design files
REFERENCE DESIGNS Download
Portable, Low Power HD Display with Increased Brightness Reference Design Using DLP® Technology
TIDA-01571 — This display reference design features the DLP Pico™ 0.3-inch TRP HD 720p display chipset and is implemented in the DLP LightCrafter™ Display 3010-G2 evaluation module (EVM). It enables the use of HD resolution for projection display applications such as mobile smart TV, virtual (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Optimizing Efficiency by Handshaking Adjustable Adapters and Battery Chargers Reference Design
TIDA-03029 — The TIDA-03029 reference design is a software implementation that uses an integrated programmable digital to analog driver to interface with an adjustable high voltage dedicated charging port. This solution allows for charging efficiency optimization by modifying the adapter output voltage according (...)
document-generic Schematic document-generic User guide
Design files
REFERENCE DESIGNS Download
Automotive, mA-to-kA Range, Current Shunt Sensor Reference Design
TIDA-03050 — This reference design shows how to detect current from the mA-to-KA range using a busbar-type shunt resistor. The increasing demand of high-capacity batteries in electric vehicles (EVs) and hybrid electric vehicles (HEVs) drives the requirement for larger current spans and highly-accurate current (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
High Performance Capacitive Sensor Front-End Reference Design
TIDA-00662 The TIDA-00662 is a high performance capacitive sensor front-end reference design. With the usage of an audio codec including a programmable miniDSP functionality impedance measurement and change in phase detection is realized. The frequency-domain sensing front-end is for pressure and flow (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
3G-SDI Repeater With Reclocking Function Reference Design
TIDA-03028 — This verified reference design is functionally an SDI repeater/signal conditioning solution for 3G SDI applications. This reference design is compatible with SMPTE ST-424, ST-292, and ST-259 electrical requirements.
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Voice Band Audio Playback Using a PWM DAC
TIDM-VOICEBANDAUDIO Low cost audio output based upon timer generating PWM & external low-pass filter with amplifier stages for either headphone or speaker. Audio data is stored in an on-board SPI Flash. A PC GUI with launchpad passthrough code is provided to load SPI Flash with audio data.
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
12-Gbps SDI and Video Over IP Repeater With Reclocking Function
TIDA-00428 — This verified reference design is a 12G SDI and Video over IP repeater with reclocking function compatible with SMPTE (ST-2082, ST-2081, ST-424, ST-292, and ST-259) and 10 GbE electrical requirements. This design is applicable to either coax or optical cable applications.
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
12-Gbps Multi-Channel BERT Board Reference Design
TIDA-00426 — This reference design is a 12-Gbps low-cost bit error tester (BERT) capable of generating and checking up to 8 channels of pseudo-random binary sequences (PRBS). This validated design is a convenient way to generate multi-channels high speed serial bit streams of up to 12-Gbps, and checking incoming (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
2-port 100GbE/40GbE/10GbE QSFP28 Signal Conditioner Reference Design
TIDA-00427 This verified reference design is a signal conditioning solution for front-port QSFP28 supporting two 100GbE ports compatible with 100G-CR4/SR4/LR4, 40G-CR4/SR4/LR4 and 10G SFF-8431 requirements. The design is applicable to optical and passive/active copper cables. It allows for reach extension (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Contactless AC-Current Sensing Using a Hall Effect Sensor
TIDA-00218 This TI Design uses Texas Instruments' Hall sensing technology to provide a solution for knowing how much AC current is flowing through a wire without any physical intervention. TIDA-00218 implements a flux concentrator to concentrate the flux around the AC current-carrying wire, rather than letting (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
QVGA 3-D Graphics on Ultra Low Power Microcontrollers
TIDM-3DGRAPHICS-QVGA This reference design demonstrates how to implement three-dimensional (3-D) graphics on a QVGA LCD using the low-power and performance MSP430F5529 microcontroller as well as the ultra-low-power MSP430FR5969 FRAM microcontroller. This implementation is made possible by using free and optimized (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
40-Pin Boosterpack for 3D Printer Control
TIDM-PRINTERPACK This design is a 40-pin boosterpack which incorporates all of the necessary components for 3D printer operation. Convenient location of all I/O headers and inclusion of firmware allows developers to immediately start creating their own cost-effective 3D printers.  Although the original (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Keyboard Controller Using Low Power Microcontroller
TIDM-KEYBOARD This reference design describes the implementation of a low-cost, highly-flexible and modular keyboard controller using MSP430. Examples for MSP430F5529 and MSP430G2744, supporting I2C and USB are included.
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
LQFP (PN) 80 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​