MSP430F5132

ACTIVE

25 MHz MCU with 8KB Flash, 1KB SRAM, 10-bit ADC, comparator, DMA, 16-bit High Resolution timer

Top

Product details

Parameters

Non-volatile memory (kB) 8 RAM (KB) 1 ADC 10-bit SAR GPIO pins (#) 31 Features 5-V-tolerant I/Os, 32-bit hardware multiplier UART 1 USB No I2C 1 SPI 2 Comparator channels (#) 16 open-in-new Find other MSP430 microcontrollers

Package | Pins | Size

DSBGA (YFF) 40 0 mm² 2.8 x 3.1 TSSOP (DA) 38 101 mm² 12.5 x 8.1 WQFN (RSB) 40 25 mm² 5 x 5 open-in-new Find other MSP430 microcontrollers

Features

  • Low Supply-Voltage Range:
    3.6 V Down to 1.8 V
  • Ultra-Low Power Consumption
    • Active Mode (AM): 180 µA/MHz
    • Standby Mode (LPM3 WDT Mode, 3 V): 1.1 µA
    • Off Mode (LPM4 RAM Retention, 3 V): 0.9 µA
    • Shutdown Mode (LPM4.5, 3 V): 0.25 µA
  • Wake up From Standby Mode in Less Than 5 µs
  • 16-Bit RISC Architecture, Extended Memory, 40-ns Instruction Cycle Time
  • Flexible Power-Management System
    • Fully Integrated LDO With Programmable Regulated Core Supply Voltage
    • Supply Voltage Supervision, Monitoring, and Brownout
  • Unified Clock System
    • FLL Control Loop for Frequency Stabilization
    • Low-Power Low-Frequency Internal Clock Source (VLO)
    • Low-Frequency Trimmed Internal Reference Source (REFO)
    • 32-kHz Crystals (XT1)
    • High-Frequency Crystals up to 25 MHz (XT1)
  • Hardware Multiplier Supports 32-Bit Operations
  • 3-Channel DMA
  • Up to Twelve 5-V-Tolerant Digital Push/Pull I/Os With up to 20-mA Drive Strength(1)
  • 16-Bit Timer TD0 With Three Capture/Compare Registers and Support of High-Resolution Mode
  • 16-Bit Timer TD1 With Three Capture/Compare Registers and Support of High-Resolution Mode
  • 16-Bit Timer TA0 With Three Capture/Compare Registers
  • Universal Serial Communication Interfaces (USCIs) (1)
    • USCI_A0 Supports:
      • Enhanced UART Supports Automatic Baud-Rate Detection
      • IrDA Encoder and Decoder
      • Synchronous SPI
    • USCI_B0 Supports:
      • I2C
      • Synchronous SPI
  • 10-Bit 200-ksps Analog-to-Digital Converter (ADC)
    • Internal Reference
    • Sample-and-Hold
    • Autoscan Feature
    • Up to 8 External Channels and 2 Internal Channels, Including Temperature Sensor(1)
  • Up to 16-Channel On-Chip Comparator Including an Ultra-Low-Power Mode(1)
  • Serial Onboard Programming, No External Programming Voltage Needed
  • Device Comparison Summarizes the Available Family Members
  • Available in 40-Pin QFN (RSB), 38-Pin TSSOP (DA), and 40-Pin Die-Sized BGA (YFF) Packages

(1)Full functionality in the 40-pin QFN package options. For the available features of other packages, see Signal Descriptions.

All trademarks are the property of their respective owners.

open-in-new Find other MSP430 microcontrollers

Description

The TI MSP family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the devices to wake up from low-power modes to active mode in less than 5 µs.

The MSP430F51x2 microcontrollers include two 16-bit high-resolution timers, two USCIs (USCI_A0 and USCI_B0), a 32-bit hardware multiplier, a high-performance 10-bit ADC, an on-chip comparator, a 3-channel DMA, 5-V tolerant I/Os, and up to 29 I/O pins.

The MSP430F51x1 microcontrollers include two 16-bit high-resolution timers, two USCIs (USCI_A0 and USCI_B0), a 32-bit hardware multiplier, an on-chip comparator, a 3-channel DMA, 5-V tolerant I/Os, and up to 29 I/O pins.

Typical applications for these devices include analog and digital sensor systems, LED lighting, digital power supplies, motor controls, remote controls, thermostats, digital timers, and hand-held meters.

For complete module descriptions, see the MSP430F5xx and MSP430F6xx Family User’s Guide.

open-in-new Find other MSP430 microcontrollers
Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 29
Type Title Date
* Datasheet MSP430F51x2, MSP430F51x1 Mixed-Signal Microcontrollers datasheet (Rev. R) Sep. 20, 2018
* Errata MSP430F5132 Device Erratasheet (Rev. Y) Feb. 20, 2020
* User guide MSP430x5xx and MSP430x6xx Family User's Guide (Rev. Q) Aug. 17, 2018
User guide MSP430 MCUs Development Guide Book Oct. 09, 2020
User guide SYS/BIOS (TI-RTOS Kernel) User's Guide (Rev. V) Jun. 01, 2020
Application note MSP430 System-Level ESD Considerations (Rev. A) Jan. 13, 2020
Application note MSP430 System ESD Troubleshooting Guide Dec. 13, 2019
Application note Programming a Flash-Based MSP430 MCU Using the JTAG Interface (Rev. H) Mar. 15, 2019
Application note MSP430F5xx Overview and Comparison to MSP430F2xx and MSP430F4xx (Rev. A) Sep. 26, 2018
Application note MSP430 Flash Memory Characteristics (Rev. B) Aug. 24, 2018
Application note Understanding MSP430 Flash Data Retention (Rev. A) Aug. 24, 2018
Application note Implementing An Ultra-Low-Power Keypad Interface With MSP430 MCUs (Rev. A) May 22, 2018
Application note Wave Digital Filtering Using an MSP430 MCU (Rev. A) May 16, 2018
Application note Hybrid Battery Charger with Load Control for Telecom Equipments (Rev. A) May 09, 2018
Application note Software Coding Techniques for MSP430™ MCUs (Rev. B) Mar. 14, 2018
Application note Migrating from the MSP430F5xx,F6xx Family to the MSP430FR58xx/FR59xx/68xx Family (Rev. D) Nov. 03, 2016
Application note Advanced Debugging Using the Enhanced Emulation Module (EEM) With CCS v6 (Rev. F) Sep. 06, 2016
Application note General Oversampling of MSP ADCs for Higher Resolution (Rev. A) Apr. 01, 2016
Technical article Design an energy-efficient, lower-acoustic cooker hood with an elegant user interface Mar. 29, 2016
Technical article Protect your BLDC motor drive with cycle-by-cycle current limit control – part 2 Jan. 28, 2016
User guide Safety Manual for MSP430G2xx, F5xx, and FR57xx in IEC 60730 Safety Applications (Rev. A) Jan. 12, 2016
Technical article Getting the most out of a high-resolution timer Jul. 17, 2014
Technical article The industry’s tiniest FRAM devices…are here! Apr. 07, 2014
White paper Getting the most out of a high-resolution timer Apr. 02, 2014
Application note Using the MSP430 Timer_D Module in Hi-Resolution Mode Oct. 02, 2013
White paper LED intelligent lighting control with ultra-low-power MSP430F51x2 family Nov. 13, 2012
White paper Power Management Solutions for Ultra-Low-Power 16-Bit MSP430 MCUs (Rev. D) Mar. 28, 2012
Application note PWM DAC Using MSP430 High-Resolution Timer Jul. 11, 2011
Application note 1.8V – 5.5V Input, High-Efficiency DCDC Converter Reference Design for MSP430 (Rev. B) Jun. 14, 2010

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

DEVELOPMENT KIT Download
document-generic User guide
95.21
Description

The MSP-TS430RSB40 is a standalone 40-pin ZIF socket target board which is used to program and debug the MSP430 MCU in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol.

Device Support: The MSP-TS430RSB40 development board supports MSP430F51x1 and MSP430F51x2 MCUs in a (...)

Features
  • Development board (MSP-TS430RSB40) with a 40-pin ZIF socket fitting MSP430 derivatives in 40-pin QFN (RSB) packages includes an LED indicator, JTAG adapter, and header pin-outs for prototyping
  • Supports all debugging interfaces using a standard 14-pin JTAG header such as the MSP-FET430UIF.
HARDWARE PROGRAMMING TOOL Download
document-generic User guide
115
Description

The MSP-FET is a powerful emulation development tool – often called a debug probe – which allows users to quickly begin development on MSP low-power microcontrollers (MCU).

It supports programming and real-time debugging over both JTAG and SBW interfaces. Furthermore, the MSP-FET also provides a (...)

Features
  • USB debugging interface to connect any MSP430 MCU to a computer for real-time, in-system programming and debugging
  • Enables EnergyTrace™ technology for energy measurement and debugging on all MSP430 and MSP432 devices in the Code Composer Studio and IAR Embedded Workbench development environments
  • (...)
HARDWARE PROGRAMMING TOOL Download
document-generic User guide
Description

The MSP Gang Programmer (MSP-GANG) is a MSP430™/MSP432™ device programmer that can program up to eight identical MSP430/MSP432 Flash or FRAM devices at the same time. It connects to a host PC using a standard RS-232 or USB connection and provides flexible programming options that allow (...)

Features
  • Quickly and reliably program Flash or FRAM-based MSP devices via RS-232 or USB interface
  • Several programming modes:
    • Interactive Mode – Programming while connected to PC using the MSP GANG Programmer GUI
    • Program from Image – An image can be stored, which contains configuration options and code (...)

Software development

SOFTWARE DEVELOPMENT KIT (SDK) Download
MSP430Ware for MSP Microcontrollers
MSPWARE MSP430Ware is a collection of resources that help users to effectively create and build MSP430 code. These resources support ALL MSP430 microcontrollers (MCUs). As one user mentioned, “It’s essentially everything developers need to become MSP430 microcontroller experts!”

This complete collection of (...)

Features
  • Collection of MSP design resources
  • Available within CCS, as a standalone executable, or as part of TI’s new Cloud-based tools
  • Auto-updates through the web
  • Sleek & intuitive GUI for browsing content
  • Features the MSP Driver Library
  • Automatic filtering of content using a unique 2-pane view
APPLICATION SOFTWARE & FRAMEWORK Download
IEC60730 Software Package
MSP430-IEC60730-SW-PACKAGE The IEC60730 MSP430 software package was developed to be useful in assisting customers in complying with IEC 60730-1:2010 (Automatic Electrical Controls for Household and Similar Use – Part 1: General Requirements) for up to Class B products, which includes home appliances, arc detectors (...)
Features
Supports testing these parts:
  • MSP430G23xx
  • MSP430G24xx
  • MSP430G25xx
  • MSP430G2x44
  • MSP430G2x55
  • MSP430F5xx
  • MSP430FR2433
  • MSP430FR25xx
  • MSP430FR26xx
  • MSP430FR57xx
DRIVER OR LIBRARY Download
Digital Signal Processing (DSP) Library for MSP430 Microcontrollers
MSP-DSPLIB The TI MSP430™ Digital Signal Processing library is a set of optimized functions to perform common signal processing operations for MSP430 microcontrollers. These functions are used in applications where processing-intensive transforms are done in real-time for minimal energy and with very (...)
DRIVER OR LIBRARY Download
MSP Graphics Library
MSP-GRLIB The MSP Graphics Library is a royalty-free set of graphics primitives for displaying images or creating graphical user interfaces (GUIs) on MSP430 and MSP432 microcontroller-based boards that use a graphical display. The graphics library consists of two functional layers: 1) the display driver layer (...)
Features
  • Free license and royalty-free use
  • Simplify and accelerate development of applications
  • Easy-to-maintain code
DRIVER OR LIBRARY Download
Floating Point Math Library for MSP430
MSPMATHLIB MSPMathLib is an accelerated floating point math library for MSP430™ MCUs that delivers up to 26x faster computation for the most commonly used math functions. The library seamlessly integrates with projects to replace floating point math functions such as sin, cos, tan, log, exp and sqrt (...)
Features
  • Up to 26x higher performance when executing floating point scalar math functions
  • Remains in low power modes longer due to the increased performance
  • Free and easy to use –  now integrated in CCS and IAR
IDE, CONFIGURATION, COMPILER OR DEBUGGER Download
Code Composer Studio™ Integrated Development Environment for MSP Microcontrollers
CCSTUDIO-MSP

Code Composer Studio is an integrated development environment (IDE) that supports TI's Microcontroller and Embedded Processors portfolio. Code Composer Studio comprises a suite of tools used to develop and debug embedded applications. It includes an optimizing C/C++ compiler, source code editor (...)

IDE, CONFIGURATION, COMPILER OR DEBUGGER Download
IAR Embedded Workbench
Provided by IAR Systems IAR Embedded Workbench includes the IAR C/C++ compiler and C-SPY debugger for building and debugging embedded applications for your selected target microcontroller. The IAR compiler generates highly optimized code for your application, and the debugger is a fully integrated debugger for source and (...)
SOFTWARE PROGRAMMING TOOL Download
UniFlash stand-alone flash tool for microcontrollers, Sitara™; processors and SimpleLink™
UNIFLASH Supported devices: CC13xx, CC25xx, CC26xx, CC3x20, CC3x30, CC3x35, Tiva, C2000, MSP43x, Hercules, PGA9xx, IWR12xx, IWR14xx, IWR16xx, IWR18xx , IWR68xx, AWR12xx, AWR14xx, AWR16xx, AWR18xx.  Command line only: AM335x, AM437x, AM571x, AM572x, AM574x, AM65XX, K2G

CCS Uniflash is a standalone tool used to (...)

Design tools & simulation

CAD/CAE SYMBOL Download
SLAC060E.ZIP (97 KB)

Reference designs

REFERENCE DESIGNS Download
Electronically Commutated Motor Reference Design for HVAC Blowers with Low BOM Cost
TIDA-01353 — The TIDA-01353 reference design is a discrete MOSFET based three-phase ECM control module for driving brushless (BLDC) motors rated up to 375W in HVAC blower applications using a sensorless trapezoidal control method. The cycle-by-cycle overcurrent protection feature protects the power stage from (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
MPPT charge controller reference design for 12-V, 24-V and 48-V solar panels
TIDA-010042 — This reference design is a Maximum Power Point Tracking (MPPT) solar charge controller for 12-V and 24-V solar panels. This compact reference design targets small and medium power solar charger solutions and is capable of operating with 15- to 60-V solar panel modules, 12- or 24-V batteries and (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Solar MPPT Charge Controller Reference Design
TIDA-00120 This design is a 20A Maximum Power Point Tracking (MPPT) solar charge controller created for solar panel inputs corresponding to 12V and 24V panels. The design is targeted for small and medium power solar charger solutions and is capable of operating with 12V/24V panels and 12V/24V batteries up to (...)
document-generic Schematic document-generic User guide
Design files
REFERENCE DESIGNS Download
Solar Street Light with Integrated MPPT Charger Reference Design
TIDA-00121 This design is a 12A Maximum Power Point Tracking (MPPT) solar charge controller with a 700mA LED driver. It is targeted for low power solar charger and LED driver solutions such as solar street lights. This design is capable of charging 12V batteries with up to 10A output current from 12V panels (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
18V/1kW, 160A Peak, >98% Efficient, High Power Density Brushless Motor Drive Reference Design
TIDA-00774 — The TIDA-00774 is a 1kW drive for a three-phase brushless DC (BLDC) motor in power tools operating from a 5-cell Li-ion battery with a voltage up to 21 V. The design is a 65mm x 60mm compact drive, implementing sensor-based trapezoidal control. The design takes advantage of TI's MOSFET Power Block (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
36-V, 1-kW, 99% Efficient, 18-cm2 Power Stage Reference Design for Three-Phase BLDC Motors
TIDA-01485 — This 1kW power stage reference design achieves 99% efficiency for a three-phase, 36V brushless DC (BLDC) motor used in industrial applications such as power tools that operate from a 10-cell Li-ion battery. The design demonstrates the smallest inverter power stage for this power levels, implementing (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
230V/250W, Hi-η Sensorless Brushless DC Motor Drive with 30% Reduced Bulk Capacitor Reference Design
TIDA-00472 The TIDA-00472 is a discrete IGBT-based three-phase inverter for driving brushless DC (BLDC) motors rated up to 250 W, for example, used in cooker hoods, using a sensor-less, trapezoidal control method. The design provides software implementation for DC bus voltage ripple compensation resulting in (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Highly Efficient, Versatile Bi-Directional Power Converter for Energy Storage and DC Home Solutions
TIDA-00476 TIDA-00476 is comprised of a single DC-DC power stage, which can work as a synchronous buck converter or a synchronous boost converter, enabling bidirectional power flow between DC power source and energy storage system. Operating in synchronous buck mode, the system works as a MPPT controlled DC-DC (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
DSBGA (YFF) 40 View options
TSSOP (DA) 38 View options
WQFN (RSB) 40 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos