Top
C2000™ 32-bit MCU with 800 MIPS, 2xCPU, 2xCLA, FPU, TMU, 1024 KB Flash, CLB, EMIF, 16b ADC

TMS320F28379D

ACTIVE

Product details

Parameters

Features Configurable Logic Block, FPU32 Total processing (MIPS) 800 Frequency (MHz) 200 Flash memory (KB) 1024 ADC resolution 16-bit /12-bit RAM (KB) 204 Sigma-delta filter 8 PWM (Ch) 24 High-resolution PWM (ch) 16 UART (SCI) 4 I2C 2 SPI 3 CAN (#) 2 Direct memory access (Ch) 12 QEP 3 USB 1 Operating temperature range (C) -40 to 105, -40 to 125 Rating Catalog TI functional safety category Functional Safety-Compliant open-in-new Find other C2000 real-time control MCUs

Package | Pins | Size

HLQFP (PTP) 176 676 mm² 26 x 26 NFBGA (ZWT) 337 256 mm² 16 x 16 open-in-new Find other C2000 real-time control MCUs

Features

  • Dual-core architecture
    • Two TMS320C28x 32-bit CPUs
    • 200 MHz
    • IEEE 754 single-precision Floating-Point Unit (FPU)
    • Trigonometric Math Unit (TMU)
    • Viterbi/Complex Math Unit (VCU-II)
  • Two programmable Control Law Accelerators (CLAs)
    • 200 MHz
    • IEEE 754 single-precision floating-point instructions
    • Executes code independently of main CPU
  • On-chip memory
    • 512KB (256KW) or 1MB (512KW) of flash (ECC-protected)
    • 172KB (86KW) or 204KB (102KW) of RAM (ECC-protected or parity-protected)
    • Dual-zone security supporting third-party development
    • Unique identification number
  • Clock and system control
    • Two internal zero-pin 10-MHz oscillators
    • On-chip crystal oscillator
    • Windowed watchdog timer module
    • Missing clock detection circuitry
  • 1.2-V core, 3.3-V I/O design
  • System peripherals
    • Two External Memory Interfaces (EMIFs) with ASRAM and SDRAM support
    • Dual 6-channel Direct Memory Access (DMA) controllers
    • Up to 169 individually programmable, multiplexed General-Purpose Input/Output (GPIO) pins with input filtering
    • Expanded Peripheral Interrupt controller (ePIE)
    • Multiple Low-Power Mode (LPM) support with external wakeup
  • Communications peripherals
    • USB 2.0 (MAC + PHY)
    • Support for 12-pin 3.3 V-compatible Universal Parallel Port (uPP) interface
    • Two Controller Area Network (CAN) modules (pin-bootable)
    • Three high-speed (up to 50-MHz) SPI ports (pin-bootable)
    • Two Multichannel Buffered Serial Ports (McBSPs)
    • Four Serial Communications Interfaces (SCI/UART) (pin-bootable)
    • Two I2C interfaces (pin-bootable)
  • Analog subsystem
    • Up to four Analog-to-Digital Converters (ADCs)
      • 16-bit mode
        • 1.1 MSPS each (up to 4.4-MSPS system throughput)
        • Differential inputs
        • Up to 12 external channels
      • 12-bit mode
        • 3.5 MSPS each (up to 14-MSPS system throughput)
        • Single-ended inputs
        • Up to 24 external channels
      • Single Sample-and-Hold (S/H) on each ADC
      • Hardware-integrated post-processing of ADC conversions
        • Saturating offset calibration
        • Error from setpoint calculation
        • High, low, and zero-crossing compare, with interrupt capability
        • Trigger-to-sample delay capture
    • Eight windowed comparators with 12-bit Digital-to-Analog Converter (DAC) references
    • Three 12-bit buffered DAC outputs
  • Enhanced control peripherals
    • 24 Pulse Width Modulator (PWM) channels with enhanced features
    • 16 High-Resolution Pulse Width Modulator (HRPWM) channels
      • High resolution on both A and B channels of 8 PWM modules
      • Dead-band support (on both standard and high resolution)
    • Six Enhanced Capture (eCAP) modules
    • Three Enhanced Quadrature Encoder Pulse (eQEP) modules
    • Eight Sigma-Delta Filter Module (SDFM) input channels, 2 parallel filters per channel
      • Standard SDFM data filtering
      • Comparator filter for fast action for out of range
  • Configurable Logic Block (CLB)
    • Augments existing peripheral capability
    • Supports position manager solutions
  • Functional Safety-Compliant
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 system design up to ASIL D; IEC 61508 up to SIL 3; IEC 60730 up to Class C; and UL 1998 up to Class 2
    • Hardware integrity up to ASIL B, SIL 2
  • Safety-related certification
  • Package options:
    • Lead-free, green packaging
    • 337-ball New Fine Pitch Ball Grid Array (nFBGA) [ZWT suffix]
    • 176-pin PowerPAD™ Thermally Enhanced Low-Profile Quad Flatpack (HLQFP) [PTP suffix]
    • 100-pin PowerPAD Thermally Enhanced Thin Quad Flatpack (HTQFP) [PZP suffix]
  • Temperature options:
    • T: –40ºC to 105ºC junction
    • S: –40ºC to 125ºC junction
    • Q: –40ºC to 125ºC free-air
      (AEC Q100 qualification for automotive applications)

All trademarks are the property of their respective owners.

open-in-new Find other C2000 real-time control MCUs

Description

C2000™ 32-bit microcontrollers are optimized for processing, sensing, and actuation to improve closed-loop performance in real-time control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; motor control; and sensing and signal processing. The C2000 line includes the Premium performance MCUs and the Entry performance MCUs.

The TMS320F2837xD is a powerful 32-bit floating-point microcontroller unit (MCU) designed for advanced closed-loop control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; and sensing and signal processing. To accelerate application development, the DigitalPower software development kit (SDK) for C2000 MCUs and the MotorControl software development kit (SDK) for C2000™ MCUs are available. The F2837xD supports a new dual-core C28x architecture that significantly boosts system performance. The integrated analog and control peripherals also let designers consolidate control architectures and eliminate multiprocessor use in high-end systems.

The dual real-time control subsystems are based on TI’s 32-bit C28x floating-point CPUs, which provide 200 MHz of signal processing performance in each core. The C28x CPUs are further boosted by the new TMU accelerator, which enables fast execution of algorithms with trigonometric operations common in transforms and torque loop calculations; and the VCU accelerator, which reduces the time for complex math operations common in encoded applications.

The F2837xD microcontroller family features two CLA real-time control coprocessors. The CLA is an independent 32-bit floating-point processor that runs at the same speed as the main CPU. The CLA responds to peripheral triggers and executes code concurrently with the main C28x CPU. This parallel processing capability can effectively double the computational performance of a real-time control system. By using the CLA to service time-critical functions, the main C28x CPU is free to perform other tasks, such as communications and diagnostics. The dual C28x+CLA architecture enables intelligent partitioning between various system tasks. For example, one C28x+CLA core can be used to track speed and position, while the other C28x+CLA core can be used to control torque and current loops.

The TMS320F2837xD supports up to 1MB (512KW) of onboard flash memory with error correction code (ECC) and up to 204KB (102KW) of SRAM. Two 128-bit secure zones are also available on each CPU for code protection.

Performance analog and control peripherals are also integrated on the F2837xD MCU to further enable system consolidation. Four independent 16-bit ADCs provide precise and efficient management of multiple analog signals, which ultimately boosts system throughput. The new sigma-delta filter module (SDFM) works in conjunction with the sigma-delta modulator to enable isolated current shunt measurements. The Comparator Subsystem (CMPSS) with windowed comparators allows for protection of power stages when current limit conditions are exceeded or not met. Other analog and control peripherals include DACs, PWMs, eCAPs, eQEPs, and other peripherals.

Peripherals such as EMIFs, CAN modules (ISO 11898-1/CAN 2.0B-compliant), and a new uPP interface extend the connectivity of the F2837xD. The uPP interface is a new feature of the C2000™ MCUs and supports high-speed parallel connection to FPGAs or other processors with similar uPP interfaces. Lastly, a USB 2.0 port with MAC and PHY lets users easily add universal serial bus (USB) connectivity to their application.

To learn more about the C2000 MCUs, visit the C2000 Overview at www.ti.com/c2000.

open-in-new Find other C2000 real-time control MCUs
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 100
Type Title Date
* Datasheet TMS320F2837xD Dual-Core Microcontrollers datasheet (Rev. M) Jun. 25, 2020
* Errata TMS320F2837xD Dual-Core MCUs Silicon Errata (Rev. L) Jun. 25, 2020
* User guide TMS320F2837xD Dual-Core Microcontrollers Technical Reference Manual (Rev. I) Sep. 05, 2019
More literature C2000™ SafeTI™ Enablers (Rev. C) Nov. 16, 2020
User guide C2000™ Safety Package for Automotive and Industrial Real-Time Microcontrollers (Rev. C) Nov. 03, 2020
Application note Flexible PWMs Enable Multi-Axis Drives, Multi-Level Inverters (Rev. B) Oct. 29, 2020
More literature Building your application with security in mind (Rev. E) Oct. 28, 2020
Application note Error Detection in SRAM (Rev. A) Oct. 28, 2020
Application note Serial Flash Programming of C2000 Microcontrollers (Rev. D) Oct. 27, 2020
Application note C2000™ Unique Device Number (Rev. B) Sep. 17, 2020
Application note The Essential Guide for Developing With C2000 Real-Time Microcontrollers (Rev. B) Sep. 09, 2020
Application note ADC Input Circuit Evaluation for C2000 MCUs Jul. 30, 2020
Application note 如何使用 C2000 CLB 实现 Traction Inverter 应用中的 PWM 输出保护功能 Jul. 27, 2020
Application note EEPROM Emulation for Gen 2 C2000 Real-Time MCUs (Rev. A) Jul. 23, 2020
Application note How to Migrate Custom Logic From an FPGA/CPLD to C2000 Microcontrollers (Rev. A) Jun. 15, 2020
White paper Streamlining Functional Safety Certification in Automotive and Industrial Jun. 09, 2020
White paper 簡化汽車及工業領域的功 能安全認證 Jun. 09, 2020
White paper 자동차 및 산업 분야의 기능적 안전성 인증 간소화 Jun. 09, 2020
User guide Getting Started With C2000 Software User's Guide Jun. 05, 2020
User guide SYS/BIOS (TI-RTOS Kernel) User's Guide (Rev. V) Jun. 01, 2020
User guide C2000 Real-Time Control Peripheral Reference Guide (Rev. N) May 19, 2020
Application note Software Examples to Showcase Unique Capabilities of TI’s C2000™ CLA Apr. 17, 2020
Application note Enhancing the Computational Performance of the C2000™ Microcontroller Famil (Rev. B) Mar. 31, 2020
E-book Ein Techniker-Leitfaden für Industrieroboter-Designs Mar. 25, 2020
User guide C2000 Position Manager PTO Library (Rev. B) Mar. 23, 2020
User guide C2000Ware DigitalPower SDK Getting Started Guide (Rev. B) Mar. 20, 2020
E-book E-book: An engineer’s guide to industrial robot designs Feb. 12, 2020
Application note CRC Engines in C2000 Devices Jan. 31, 2020
Application note Configurable Error Generator for Controller Area Network Dec. 19, 2019
White paper Simplify the integration of position sensors for industrial drive control system (Rev. A) Nov. 21, 2019
User guide TMS320C28x Extended Instruction Sets Technical Reference Manual (Rev. C) Oct. 29, 2019
Application note C2000 Security Tool Oct. 17, 2019
Application note Quick Response Control of PMSM Using Fast Current Loop (Rev. A) Oct. 11, 2019
Technical articles Ethernet-based control and monitoring of Vienna rectifiers using the latest addition to the C2000 MCU family Oct. 01, 2019
Application note Dual-Axis Motor Control Using FCL and SFRA On a Single C2000™ MCU Aug. 07, 2019
Application note Development Tool Versions for C2000 Support Jul. 19, 2019
User guide C2000™ Software Frequency Response Analyzer (SFRA) Library User’s Guide (Rev. A) Jun. 26, 2019
Technical articles Real-time controllers get new connectivity capabilities Jun. 19, 2019
Functional safety information Certification for SafeTI Functional Safety Hardware Process (Rev. A) Jun. 07, 2019
User guide Fast Current Loop Driverlib Library User’s Guide May 30, 2019
Application note Programming Examples for the DCAN Module May 17, 2019
Application note Calculating Useful Lifetimes of Embedded Processors (Rev. B) May 07, 2019
More literature Report on certificate of the Safety MCU by TUV SUD May 07, 2019
More literature TUV SUD product service certificate 1 C2000 May 07, 2019
Technical articles Motor control software development kit jump-starts new designs Apr. 17, 2019
White paper C2000™ MCU SafeTI™ control solutions: An introduction to ASIL decomposition Apr. 10, 2019
User guide DesignDRIVE IDDK Hardware Reference Guide Apr. 10, 2019
User guide DesignDRIVE IDDK User Guide Apr. 10, 2019
User guide TMS320F2837xD, TMS320F2837xS, and TMS320F2807xsafety manual user's guide (Rev. C) Mar. 27, 2019
User guide C2000Ware motor control SDK getting started guide Mar. 20, 2019
Technical articles Searching for the newest innovations in power? Find them at APEC Feb. 08, 2019
Application note Designing With The C2000 Configurable Logic Block Feb. 05, 2019
White paper Addressing Systematic and Random hardware faults using C2000 SafeTI Products (Rev. A) Jan. 31, 2019
User guide Delfino TMS320F28379D controlCARD R1.3 (Rev. A) Jan. 14, 2019
Application note Updating Firmware on Security Enabled TMS320F2837xx or TMS320F2807x Devices Dec. 04, 2018
Application note Interfacing the C2000 with an AFE03x: B-FSK Example (Rev. C) Sep. 24, 2018
White paper Breakthrough technologies lead the solar power industry into the future Jul. 27, 2018
White paper Exploring the evolution and optimization of wireless power transfer Jul. 27, 2018
White paper Functional Safety: A tunable FMEDA for C2000™ MCUs Jul. 27, 2018
More literature C2000™ Safety Mechanisms Jul. 17, 2018
Application note PowerPAD™ Thermally Enhanced Package (Rev. H) Jul. 06, 2018
White paper Maximizing power for Level 3 EV charging stations Jun. 12, 2018
White paper Achieving Coexistence of Safety Functions for EV/HEV Using C2000 MCUs May 21, 2018
Application note C2000 MCU JTAG Connectivity Debug May 11, 2018
Application note Design and Usage Guidelines for the C2000 External Memory Interface (EMIF) (Rev. A) Mar. 23, 2018
Application note Dual Motor Ctl Using FCL and Perf Analysis Using SFRA on TMS320F28379D LaunchPad (Rev. A) Mar. 20, 2018
User guide Fast Current Loop (C28x) Library Mar. 06, 2018
Application note Performance Analysis of Fast Current Loop (FCL) in Servo Mar. 06, 2018
User guide TMS320F2837xD Dual-Core Delfino Microcontrollers Technical Reference Manual (Rev. H) Mar. 02, 2018
User guide TMS320F2837xD Flash API Version 1.54 Reference Guide (Rev. A) Jan. 18, 2018
Application note Programming TMS320x28xx and 28xxx Peripherals in C/C++ (Rev. E) Dec. 19, 2017
Application note C2000 CPU Memory Built-In Self-Test Nov. 27, 2017
Application note C2000™ Hardware Built-In Self-Test Oct. 26, 2017
More literature TMS320F28379D LaunchPad Quick Start Guide (Rev. A) Aug. 11, 2017
Application note Fast Current Loop Library May 08, 2017
Application note High Bandwidth Current Control of 3-Phase PMSM Using F2837x FCL Library May 08, 2017
User guide TMS320F2837xD Flash API Version 1.54 Reference Guide Mar. 07, 2017
White paper Intelligent Battery Management & Charging for electric vehicles (Rev. A) Feb. 02, 2017
User guide C2000 Position Manager T-Format Library Module User's Guide Sep. 26, 2016
White paper Designing the Next Generation of Industrial Drive and Control Systems (Rev. A) Sep. 12, 2016
Application note Semiconductor and IC Package Thermal Metrics (Rev. C) Apr. 19, 2016
Application note Calculator for CAN Bit Timing Parameters Mar. 22, 2016
Application note Sensored Field Oriented Control of 3-Phase Perm Magnet Sync Motors Using F2837x Feb. 12, 2016
Application note The TMS320F2837xD Architecture: Achieving a New Level of High Performance Feb. 11, 2016
User guide Using Position Manager SinCos Library on IDDK User's Guide Jan. 19, 2016
User guide C2000 Position Manager SinCos Library User's Guide Jan. 07, 2016
User guide DesignDRIVE Development Kit IDDK v2.2.1 - Hardware Reference Guide Nov. 09, 2015
User guide DesignDRIVE Development Kit IDDK v2.2.1 - User’s Guide Nov. 09, 2015
User guide C2000 Position Manager BISS-C Library User's Guide Nov. 05, 2015
User guide C2000 Position Manager EnDat22 Library Module User's Guide Nov. 05, 2015
User guide Using Position Manager BiSS-C Library on IDDK User's Guide Nov. 05, 2015
User guide Using Position Manager EnDat22 Library on IDDK HW User's Guide Nov. 05, 2015
User guide TMS320C28x DSP CPU and Instruction Set (Rev. F) Apr. 10, 2015
Application note Accessing External SDRAM on the TMS320F2837x/2807x Microcontrollers Using C/C++ Mar. 30, 2015
User guide TMS320F2837xD Dual-Core Delfino Microcontrollers Technical Reference Manual (Rev. C) Dec. 12, 2014
White paper Resolver-to-digital conversion implementation (Rev. A) Mar. 26, 2014
Application note Running an Application from Internal Flash Memory on the TMS320F28xxx DSP (Rev. L) Feb. 28, 2013
Application note TMS320C28x FPU Primer (Rev. A) Jul. 20, 2009
Application note Using PWM Output as a Digital-to-Analog Converter on a TMS320F280x (Rev. A) Sep. 09, 2008
Application note Flash Programming Solutions for the TMS320F28xxx DSCs Aug. 19, 2008

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
49
Description
The BOOSTXL-3PHGANINV evaluation module features a 48-V/10-A three-phase GaN inverter with precision in-line shunt-based phase current sensing for accurate control of precision drives such as servo drives.
Features
  • Wide Input Voltage Range 12-V to 60-V Three Phase GaN Inverter with 7-ARMS Output Current per Phase
  • High Accuracy Phase Current Sensing Over Temperature Range From –25°C to 85°C
  • Precision In-Line Phase Current Sensing
  • TI BoosterPack Compatible Interface

Get started

  • See the Get Started sections of (...)
EVALUATION BOARD Download
49
Description
The PositionManager BoosterPack is a flexible low voltage platform intended for evaluating interfaces to absolute encoders and analog sensors like resolvers and SinCos transducers.  When combined with the DesignDRIVE Position Manager software solutions this low-cost evaluation module becomes a (...)
Features

Hardware Features

  • 2x channels of RS-485 line interface supporting up to 100m distances
  • 1x SinCos analog interface
  • 2x 20-pin headers/connectors to LaunchPad
  • Capable of supporting 2x absolute encoders simultaneously
  • Works with CLB-enabled C2000 MCUs
  • Hardware Files are in controlSUITE at (...)
EVALUATION BOARD Download
999
Description
The Vienna rectifier power topology is used in high power three phase power factor (AC-DC) applications such as off-board electric vehicle (EV) chargers and telecom rectifiers. This design illustrates how to control the power stage using C2000™ MCUs. This design uses an HSEC180 controlCARD (...)
Features

Hardware Features

  • EVM with interface to accept HSEC180 controlCARDs
  • Greater than 98% peak efficiency
  • Less than 2% THD at full load and low line
  • Up to 2.4KW design with three phase 400Vac VL-L Input
  • Hardware Files are in DigitalPower SDK at solutions (...)
DAUGHTER CARD Download
159
Description

TMDSCNCD28379D is an HSEC180 controlCARD based evaluation and development tool for the F2837xD,  F2837xS, and F2807x series in the TI MCU. controlCARDs are ideal to use for initial evaluation and system prototyping. controlCARDs are complete board-level modules that utilize one of two standard (...)

Features

Hardware Features

  • TMDSCNCD28379D: TMS320F28379D HSEC180 based controlCARD
    • Isolated XDS100v2 USB-to-JTAG Debug Probe enables real-time in-system programming and debugging
  • Standard 180-pin HSEC interface
  • Analog I/O, digital I/O and JTAG signals at card interface
  • USB Host connector
  • SDCard Slot
  • Hardware Files (...)
DAUGHTER CARD Download
69
Description

TMDSHSECDOCK is a baseboard that provides header pin access to key signals on compatible HSEC180-based controlCARDs.  A breadboard area is available for rapid prototyping.  Board power can be provided by the provided USB cable or a 5V barrel supply.

Features
  • Bread-board like baseboard with HSEC180 controlCARD female connector
    • Header pin access to key MCU signals
    • Breadboard area for customizable routing and prototyping
    • Board power can be provided by the provided USB cable or a 5V barrel supply
DEBUG PROBE Download
99
Description

The Texas Instruments XDS110 is a new class of debug probe (emulator) for TI embedded processors. The XDS110 replaces the XDS100 family while supporting a wider variety of standards (IEEE1149.1, IEEE1149.7, SWD) in a single pod. Also, all XDS debug probes support Core and System Trace in all ARM and (...)

Features

The XDS110 is the latest entry level debug probe (emulators) for TI embedded processors. Designed to be a complete solution that delivers JTAG and SWD connectivity at a low cost, the XDS110 is the debug probe of choice for entry-level debugging of TI microcontrollers, processors and SimpleLink (...)

DEBUG PROBE Download
XDS200 USB Debug Probe
TMDSEMU200-U
295
Description

The Spectrum Digital XDS200 is the first model of the XDS200 family of debug probes (emulators) for TI processors. The XDS200 family features a balance of low cost with good performance between the super low cost XDS110 and the high performance XDS560v2, while supporting a wide variety of standards (...)

Features

The XDS200 is the mid-range family of JTAG debug probes (emulators) for TI processors. Designed to deliver good performance and the most common features that place it between the low cost XDS110 and the high performance XDS560v2, the XDS200 is the balanced solution to debug TI microcontrollers (...)

DEBUG PROBE Download
995
Description

The XDS560v2 System Trace is the first model of the XDS560v2 family of high-performance debug probes (emulators) for TI processors. The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7).

The (...)

Features

XDS560v2 is the latest variant of the XDS560 family of high-performance debug probes (emulators) for TI processors. With the fastest speeds and most features of the entire XDS family, XDS560v2 is the most comprehensive solution to debug TI microcontrollers, processors and wireless connectivity (...)

DEBUG PROBE Download
1495
Description

The XDS560v2 System Trace is the first model of the XDS560v2 family of high-performance debug probes (emulators) for TI processors. The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7).

The (...)

Features
  • XDS560v2 is the latest variant of the XDS560 family of high-performance debug probes (emulators) for TI processors. With the fastest speeds and most features of the entire XDS family, XDS560v2 is the most comprehensive solution to debug TI microcontrollers, processors and wireless connectivity (...)

DEVELOPMENT KIT Download
Description

To get started developing:
Step 1: Buy the C2000 MCU F28379D LaunchPad
Step 2: Read the quick start guide

LAUNCHXL-F28379D is a low cost evaluation and development tool for the F2837xD,  F2837xS, and F2807x series in the TI MCU LaunchPad ecosystem which is compatible with various plug-on BoosterPacks (...)

Features

Hardware features

  • USB connected isolated XDS100v2 JTAG debug probe for real-time debug and flash programming
  • 4x 20-pin headers/connectors
  • Programmable buttons and LEDs
  • TMS320F28379D: 200 MHz dual C28xCPUs and dual CLAs, 1 MB Flash, 16-bit/12-bit ADCs, comparators, 12-bit DACs, delta-sigma sinc filters (...)
DEVELOPMENT KIT Download
749
Description
This reference design implements single phase inverter (DC-AC) control using the C2000™ F2837xD and F28004x microcontrollers. Design supports two modes of operation for the inverter. First is voltage source mode using an output LC filter, this control mode is typically used in Uninterrupted (...)
Features
  • powerSUITE supported Voltage Source Inverter and Grid Connected Inverter Design
  • Peak 98% efficiency in Voltage Source Mode and <4% THD in case of non linear loads
  • Input 380V DC, Output 220Vrms 50Hz or 110Vrms 60Hz and 600VA Max
  • Hardware Files are in DigitalPower SDK at solutions\tidm_hv_1ph_dcac
DEVELOPMENT KIT Download
219
Description

TMDSDOCK28379D is a HSEC180 controlCARD based evaluation and development tool for the C2000™ Delfino™ F2837x and Piccolo F2807x series of microcontroller products. The Docking Station provides power to the controlCARD and has a bread-board area for prototyping. Access to the key device (...)

Features

Hardware Features

  • TMDSCNCD28379D: TMS320F28379D HSEC180 based controlCARD
    • Isolated XDS100v2 USB-to-JTAG Debug Probe enables real-time in-system programming and debugging
  • Bread-board like baseboard with HSEC180 controlCARD female connector
    • Header pin access to key MCU signals
    • Breadboard area for (...)
DEVELOPMENT KIT Download
Description

The DesignDRIVE Development Kit (IDDK) hardware offers an integrated servo drive design with full power stage to drive a high voltage three-phase motor and eases the evaluation of a range of position feedback, current sensing and control topologies.

The sensing peripherals on the C2000™ MCU (...)
Features
  • Supports the DesignDRIVE fast current loop
  • Supports the DesignDRIVE position manager technology - EnDat22, BiSS-C, Tamagawa T-format, SIN/COS, resolver and incremental encoders
  • EtherCAT™ slave stack solution with TMDSCNCD28388D or TMDSECATCNCD379D controlCARD upgrade as well as expansion support (...)
HARDWARE PROGRAMMING TOOL Download
Description

From Elprotronics, Inc. - The C2000 Gang Programmer is a C2000 device programmer that can program up to eight identical C2000 devices at the same time. The C2000 Gang Programmer connects to a host PC using a standard RS-232 or USB connection and provides flexible programming options that allow the (...)

Features
    • Quickly and reliably program C2000 devices via an RS-232 or USB interface
    • Several programming modes:
- Interactive Mode: Programming while connected to PC using the C2000 GANG Programmer GUI.
- Program from Image: An image can be stored, which contains configuration options and code files. This allows (...)

Software development

SOFTWARE DEVELOPMENT KIT (SDK) Download
C2000Ware for C2000 MCUs
C2000WARE C2000Ware is a cohesive set of software and documentation created to minimize development time. It includes device-specific drivers, libraries, and peripheral examples.
  • Hardware design schematics, BOM, gerber files, and documentation for C2000 controlCARDS, Experimenter Kits, and LaunchPads.
  • (...)
Features
  • 1 package for all foundational development collateral, the place to go for getting started
  • TI Cloud support
  • Linux and Mac Installation Support
  • Easy deployment: Small download/installation size (significantly smaller than controlSUITE)
  • Same device support as controlSUITE plus more
SOFTWARE DEVELOPMENT KIT (SDK) Download
DigitalPower software development kit (SDK) for C2000™ MCUs
C2000WARE-DIGITALPOWER-SDK
    • DigitalPower SDK for C2000™ microcontrollers (MCU) is a cohesive set of software infrastructure, tools, and documentation designed to minimize C2000 MCU based digital power system development time targeted for various AC-DC, DC-DC and DC-AC power supply applications. The software includes (...)
Features
      • Complete software repository for C2000 MCU Digital Power Applications: solar, telecom, server, electric vehicle chargers and industrial power delivery
      • powerSUITE: digital power supply software design tools
        • Solution Adapter: Customize code examples to run on example or custom hardware
        • Compensation (...)
SOFTWARE DEVELOPMENT KIT (SDK) Download
MotorControl software development kit (SDK) for C2000™ MCUs
C2000WARE-MOTORCONTROL-SDK
  • MotorControl SDK for C2000™ microcontrollers (MCU) is a cohesive set of software infrastructure, tools, and documentation designed to minimize C2000 MCU based motor control system development time targeted for various three-phase motor control applications. The software includes firmware that (...)
Features
  • Complete software repository for C2000 MCU Motor Control Applications
  • InstaSPIN-FOC: Sensorless FOC solutions
    • Sensorless Torque or Velocity Field Oriented Control
    • FAST™ software observer for premium rotor Flux, Angle, Speed, and Torque estimations
    • Motor Parameter Identification
    • Observer and torque (...)
DRIVER OR LIBRARY Download
C2000 SafeTI™ Diagnostic Software Library
C2000-SAFETI-DIAGNOSTICS-LIB C2000 SafeTI diagnostic library advantage

The C2000 MCU Diagnostic Software package includes SafeTI™ software that helps make designing for functional safety applications with TI C2000™ real-time control microcontrollers (MCUs) easier and faster. The safety mechanisms employed are (...)

Features
  • Support for the following C2000 series
    • Delfino F2837xD
    • Delfino F2837xS
    • Piccolo F2807x
    • C28x CPU and Control Law Accelerator
  • Functional Safety Manual
  • Diagnostic Software or Self-Test Libraries
    • Source Code
    • User Guides
    • Code Examples Software
  • Documentation:
    • Design Documents and Unit Test Plans
    • Dynamic Analysis (...)
IDE, CONFIGURATION, COMPILER OR DEBUGGER Download
C2000 code generation tools - compiler
C2000-CGT — The TI C2000 C/C++ Compiler and Assembly Language Tools support development of applications for TI C2000 Microcontroller platforms, including the Concerto (F28M3xx), Piccolo (280xx), Delfino Floating-Point (283xx), and C2000 Fixed-Point (2823x/280x/281x) Microcontroller devices.
Features
  • Available in release 20.2.0.LTS:
    • Hex utility tool new option --cmac (cipher-based message authentication protocol) will apply cmac algorithm to user defined regions and generate cmac tags for secure boot support.
    • The Integer Division Unit (--idiv_support=idiv0) has performance, diagnostic, and build (...)
IDE, CONFIGURATION, COMPILER OR DEBUGGER Download
Code Composer Studio (CCS) Integrated Development Environment (IDE) for C2000 Microcontrollers
CCSTUDIO-C2000

Code Composer Studio is an integrated development environment (IDE) that supports TI's Microcontroller and Embedded Processors portfolio. Code Composer Studio comprises a suite of tools used to develop and debug embedded applications. It includes an optimizing C/C++ compiler, source code editor (...)

IDE, CONFIGURATION, COMPILER OR DEBUGGER Download
Safety Compiler Qualification Kit
SAFETI_CQKIT The Safety Compiler Qualification Kit was developed to assist customers in qualifying their use of the TI ARM, C6000, C7000 or C2000/CLA C/C++ Compiler to functional safety standards such as IEC 61508 and ISO 26262.

The Safety Compiler Qualification Kit:

  • does not require the user to run qualification (...)
Features

The Safety Compiler Qualification Kit has been assessed by TÜV Nord to comply with both IEC 61508 and ISO 26262 and was developed in collaboration with by Validas, a consulting company that specializes in software tool qualification.

What's Included

Safety Compiler Qualification Kit includes: 

  • Safety (...)
SOFTWARE PROGRAMMING TOOL Download
UniFlash stand-alone flash tool for microcontrollers, Sitara™; processors and SimpleLink™
UNIFLASH Supported devices: CC13xx, CC25xx, CC26xx, CC3x20, CC3x30, CC3x35, Tiva, C2000, MSP43x, Hercules, PGA9xx, IWR12xx, IWR14xx, IWR16xx, IWR18xx , IWR68xx, AWR12xx, AWR14xx, AWR16xx, AWR18xx.  Command line only: AM335x, AM437x, AM571x, AM572x, AM574x, AM65XX, K2G

CCS Uniflash is a standalone tool used to (...)

Design tools & simulation

SIMULATION MODEL Download
SPRM637A.ZIP (441 KB) - IBIS Model
SIMULATION MODEL Download
SPRM638A.ZIP (438 KB) - IBIS Model
SIMULATION MODEL Download
SPRM644A.ZIP (5 KB) - BSDL Model
SIMULATION MODEL Download
SPRM645A.ZIP (4 KB) - BSDL Model
SIMULATION MODEL Download
SPRM658.ZIP (260 KB) - IBIS Model
SIMULATION MODEL Download
SPRM677A.ZIP (3 KB) - BSDL Model

Reference designs

Many TI reference designs include the TMS320F28379D Use our reference design selection tool to review and identify designs that best match your application and parameters.

CAD/CAE symbols

Package Pins Download
HLQFP (PTP) 176 View options
NFBGA (ZWT) 337 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos