Top

Product details

Parameters

Processor Arm® Cortex®-M4 Package (mm) 20.5 17.5 LGA, 1.27 Pitch, 63 pin, Module Throughput (Max) (Mbps) 16 Security AES, DES and 3 DES, SHA2 and MD5, CRD and checksum Features 802.11bgn, IPv4, 2 secure sockets, 1 STA open-in-new Find other Wi-Fi products

Package | Pins | Size

QFM (MOB) 63 359 mm² 17.5 x 20.5 open-in-new Find other Wi-Fi products

Features

  • CC3200MOD is a Wi-Fi module consisting of CC3200R1M2RGC single-chip wireless microcontroller (MCU)
  • Fully integrated module includes all required clocks, SPI Flash, and passives
  • Modular FCC, IC, TELEC, and CE certifications save customer effort, time, and money
  • Wi-Fi Alliance members can request certificate transfer of Wi-Fi CERTIFIED™ modules
  • 1.27-mm pitch QFM package for easy assembly and low-cost PCB design
  • Applications MCU subsystem:
    • Arm® Cortex®-M4 core at 80 MHz
    • Embedded memory:
      • Integrated serial Flash
      • RAM (up to 256KB)
      • Peripheral drivers in ROM
    • Hardware crypto engine for advanced hardware security including:
      • AES, DES, and 3DES
      • SHA and MD5
      • CRC and Checksum
    • 8-Bit parallel camera
    • One Multichannel Audio Serial Port (McASP) interface with support for I2S format
    • One SD (MMC) interface
    • 32-channel Micro Direct Memory Access (µDMA)
    • Two Universal Asynchronous Receivers and Transmitters (UARTs)
    • Two Serial Peripheral Interfaces (SPIs)
    • One Inter-integrated Circuit (I2C)
    • Four General-Purpose Timers (GPTs)
    • 16-Bit Pulse-Width Modulation (PWM) mode
    • One Watchdog Timer Module
    • 4-channel, 12-bit Analog-to-Digital Converters (ADCs)
    • Up to 25 individually programmable GPIO pins
  • Wi-Fi network processor subsystem:
    • 802.11 b/g/n radio, baseband, and medium access control
    • TCP/IP Stack
      • Eight simultaneous TCP, UDP, or RAW sockets
      • Two simultaneous TLS v1.2 or SSL 3.0 sockets
    • ARP, ICMP, DHCP, DNS, and mDNS support
    • HTTP server with built-in programmable HTML page for over-the-network device configuration
    • Powerful crypto engine for fast, secured WLAN connections with 256-bit encryption
    • Station, Access Point, and Wi-Fi Direct Modes
    • WPA2 personal and enterprise security
    • SimpleLink™ connection manager for managing Wi-Fi security states
    • TX power:
      • 17.0 dBm at 1 DSSS
      • 17.25 dBm at 11 CCK
      • 13.5 dBm at 54 OFDM
    • RX sensitivity:
      • –94.7 dBm at 1 DSSS
      • –87.0 dBm at 11 CCK
      • –73.0 dBm at 54 OFDM
    • Application Throughput:
      • UDP: 16 Mbps
      • TCP: 13 Mbps
  • Power-management subsystem:
    • Integrated DC/DC converter with a wide-supply voltage:
      • VBAT: 2.3 to 3.6 V
    • Low-power consumption At 3.6 V:
      • Hibernate with Real-Time Clock (RTC): 7 µA
      • Low-Power Deep Sleep: <275 µA
      • RX Traffic: 59 mA at 54 OFDM
      • TX Traffic: 229 mA at 54 OFDM
    • Package and operating conditions:
      • 1.27-mm pitch, 63-Pin, 20.5-mm × 17.5-mm QFM package for easy assembly and low-cost PCB design
      • Operating temperature range: –20°C to +70°C
  • Additional integrated components:
    • 40.0-MHz crystal
    • 32.768-kHz crystal (RTC)
    • 8-Mbit SPI Serial Flash
    • RF filter and passive components
  • QFM package:
    • 1.27-mm pitch, 63-pin, 20.5-mm × 17.5-mm QFM package for easy assembly and low-cost PCB design
  • Operating temperature:
    • Ambient temperature range: –40°C to +85°C
  • Module supports SimpleLink Developer’s Ecosystem

All trademarks are the property of their respective owners.

open-in-new Find other Wi-Fi products

Description

Start your design with the industry’s first programmable FCC, IC, CE, and Wi-Fi CERTIFIED™ wireless MCU module with built-in Wi-Fi® connectivity. Created for the IoT, the SimpleLink™ CC3200MOD is a wireless MCU module that integrates an Arm® Cortex®-M4 MCU, allowing customers to develop an entire application with one device. With on-chip Wi-Fi, Internet, and robust security protocols, no prior Wi-Fi experience is required for faster development. The CC3200MOD integrates all required system-level hardware components including clocks, SPI Flash, RF switch, and passives into an QFM package for easy assembly and low-cost PCB design. The CC3200MOD is provided as a complete platform solution including software, sample applications, tools, user and programming guides, reference designs, and the TI E2E™ support community.

The applications MCU subsystem contains an industry-standard Arm® Cortex®-M4 core running at 80 MHz.

The device includes a wide variety of peripherals, including a fast parallel camera interface, I2S, SD/MMC, UART, SPI, I2C, and four-channel ADC. The CC3200 family includes flexible embedded RAM for code and data; ROM with external serial Flash bootloader and peripheral drivers; and SPI Flash for Wi-Fi network processor service packs, Wi-Fi certificates, and credentials.

The Wi-Fi network processor subsystem features a Wi-Fi Internet-on-a chip™ and contains an additional dedicated Arm® MCU that completely off-loads the applications MCU. This subsystem includes an 802.11 b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption. The CC3200MOD supports station, access point, and Wi-Fi Direct modes. The device also supports WPA2 personal and enterprise security and WPS 2.0. The Wi-Fi Internet-on-a-chip includes embedded TCP/IP and TLS/SSL stacks, HTTP server, and multiple Internet protocols. The power-management subsystem includes integrated DC/DC converters supporting a wide range of supply voltages. This subsystem enables low-power consumption modes, such as the hibernate with RTC mode requiring less than 7 µA of current.

open-in-new Find other Wi-Fi products
Download
Similar products you might be interested in
open-in-new Compare products
Same functionality and pinout but is not an equivalent to the compared device:
CC3220MOD ACTIVE SimpleLink™ 32-bit Arm Cortex-M4 Wi-Fi CERTIFIED™ wireless module This module supports the 2.4GHz band with additional security features and lower power.
Similar but not functionally equivalent to the compared device:
CC3235MODSF ACTIVE SimpleLink™ 32-bit Arm Cortex-M4 dual-band Wi-Fi CERTIFIED™ wireless module with 1MB Flash This module supports dual-band 2.4 GHz and 5 GHz Wi-Fi with enhanced security features & 1MB XIP Flash.

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 31
Type Title Date
* Datasheet CC3200MOD SimpleLink™ Certified Microcontroller and Wi-Fi® Network Processor Mod datasheet (Rev. C) Sep. 22, 2020
* User guide CC3200 SimpleLink Wi-Fi Wireless MCU Technical Reference Manual (Rev. D) May 09, 2018
Application note SimpleLink™ Wi-Fi® Enabled Electronic Smart Lock (Rev. A) Sep. 29, 2020
Application note CE Compliance Test Procedure for TI’s WiFi Devices Aug. 19, 2020
More literature Product Information for CC3xxx Devices as Per Annex-E of EN 300 328 Aug. 10, 2020
Application note CC3x00 Power Management Optimization and Measures (Rev. A) Jun. 02, 2020
Application note CE Regulations for SRDs Operating in License-Free 2.4GHz/5GHz Bands-WiFi Devices Apr. 15, 2020
Application note Transfer of TI Wi-Fi® Alliance Certifications to Products Using WFA Cert Policy (Rev. F) Jan. 30, 2020
User guide SimpleLink™ Wi-Fi® CC3100, CC3200 UniFlash User's Guide Jan. 15, 2020
Technical articles Bluetooth® Low Energy shifts gears for car access Jul. 15, 2019
White paper Low-Power Internet Connectivity Over Wi-Fi (Rev. A) May 23, 2019
Technical articles Top 3 design challenges that the new generation of SimpleLink™ Wi-Fi® devices will help you overcome Feb. 21, 2019
White paper A primer to Wi-Fi® provisioning for IoT applications (Rev. A) Jan. 31, 2019
User guide CC3200MOD SimpleLink Wi-Fi and IoT Solution With MCU-Module LaunchPad User Guide (Rev. A) Aug. 27, 2018
Technical articles Exploring the impact of IoT on innovation Jul. 17, 2018
More literature IP smart door locks: Power optimized and added security features for cloud conne (Rev. B) Jun. 26, 2018
Technical articles An out-of-the-box Internet of Things: building a seamless and secure smart home network Jun. 12, 2018
User guide CC3100/CC3200 SimpleLink Wi-Fi Internet-on-a-Chip User's Guide (Rev. B) May 09, 2018
User guide CC3200 SimpleLink Wi-Fi and IoT Solution w/ MCU LaunchPad Getting Started Guide (Rev. E) May 09, 2018
More literature Design a low power camera with optimized cloud streaming and enhanced security u (Rev. A) Apr. 24, 2018
More literature Design a video doorbell with optimized cloud streaming and enhanced security fea (Rev. A) Apr. 24, 2018
White paper Wireless Connectivity For The Internet of Things, One Size Does Not Fit All (Rev. A) Oct. 16, 2017
More literature CC3200MODR1M2AMOB EC Declaration of Conformity (DoC) Sep. 07, 2017
More literature CC3200MOD Reliability Data - Reliability Estimate Jul. 27, 2017
More literature Streamline the challenges of RF design with certified wireless modules Jan. 25, 2017
More literature TI SimpleLink™ Wi-Fi® Family - Internet-on-a-chip solutions (Rev. C) Sep. 07, 2016
User guide TI-RTOS 2.16 for CC32xx SimpleLink Wireless MCUs Getting Started Guide (Rev. F) Feb. 22, 2016
E-book Understanding Wireless Connectivity in the Industrial IoT Jul. 22, 2015
User guide Antenna Board User's Guide Aug. 07, 2014
White paper A link to the Internet of Things IoT Made Easy With SimpleLink Wi-Fi Solutions Jul. 31, 2014
Application note CC31xx/CC32xx SimpleLink™ Wi-Fi® and IoT Power Management App Report Jul. 28, 2014

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
29
Description

The SimpleLink™ Wi-Fi® CC3200 Audio BoosterPack enables the evaluation and development with the digital audio peripheral [I2S] present on the SimpleLink™ Wi-Fi® CC3200 device. It contains a Class-D power amplifier to drive speakers and an ultra-low power audio codec, TLV320AIC3254, supporting (...)

Features
  • 1 Microphone
  • 1 audio 3.5 mono jack
  • 2 audio 3.5 mm stereo jack (in and out)
  • Onboard speaker connector using terminal blocks (stereo)
  • Onboard audio codec (TLV320AIC3254)
  • Onboard class-D audio power amplifier (TPA2012D2)
DEBUG PROBE Download
149
Description

The Texas Instruments XDS110 EnergyTrace™ High Dynamic Range (ETHDR) is an accessory to the XDS110 Debug Probe (emulator) that increases the Dynamic Range of the Energy Trace feature. This allows performing very accurate power consumption measurements on all Simplelink Wireless MCUs while (...)

Features

The Texas Instruments XDS110 EnergyTrace™ High Dynamic Range (ETHDR) is the first accessory to the XDS110 Debug Probe (emulator). Designed to be a complete plug-in solution that brings EnergyTrace to the higher power wireless connectivity systems, it features an improved range, resolution and (...)

Software development

SOFTWARE DEVELOPMENT KIT (SDK) Download
SimpleLink Wi-Fi CC3200 Software Development Kit (SDK)
CC3200SDK The SimpleLink™ Wi-Fi® CC3200 SDK contains drivers for the CC3200 programmable MCU, 40+ sample applications, and documentation needed to use the solution. It also contains the flash programmer, a command line tool for flashing software, configuring network and software parameters (SSID (...)
Features

Categories of applications are outlined below:

  • Internet-on-a-chip sample applications
    • Email from SimpleLink Wi-Fi solution
    • Information center: get time and weather from the internet
    • http server: host a web page on SimpleLink Wi-Fi solution
    • XMPP: IM chat client
    • Serial interface
  • Wi-Fi sample applications
    • Easy (...)
IDE, CONFIGURATION, COMPILER OR DEBUGGER Download
SimpleLink™ Wi-Fi® radio testing tool
CC3XXXRADIOTEST The SimpleLink™ Wi-Fi® Radio Testing Tool is a Windows-based software tool for RF evaluation and testing of SimpleLink Wi-Fi CC31xx and CC32xx designs during development and certification.  The tool enables low-level radio testing capabilities by manually setting the radio into (...)
Features
  • Works seamlessly with SimpleLink Wi-Fi CC32xx LaunchPad and CC31xx BoosterPack
  • Uses 4-wire UART for control and communication
  • Transmit Wi-Fi packets in packetized and continuous modes
  • Graphical User Interface (GUI) for configuration and display
  • User-defined configuration of channel, power level (...)
IDE, CONFIGURATION, COMPILER OR DEBUGGER Download
Code Composer Studio™ integrated development environment (IDE) for wireless connectivity
CCSTUDIO-WCS Code Composer Studio is an integrated development environment (IDE) that supports TI's Microcontroller and Embedded Processors portfolio. Code Composer Studio comprises a suite of tools used to develop and debug embedded applications. It includes an optimizing C/C++ compiler, source code editor (...)
SOFTWARE PROGRAMMING TOOL Download
SimpleLink™ Wi-Fi® Embedded Programming
EMBEDDED-PROGRAMMING Each product that has an embedded CC3120/CC3220 device on board must also have a serial flash device connected. The serial flash must be formatted and, at minimum, be programmed with the Service Pack that contains necessary software updates and additional features. In the case of CC3220, a binary (...)
SOFTWARE PROGRAMMING TOOL Download
UniFlash stand-alone flash tool for microcontrollers, Sitara™; processors and SimpleLink™
UNIFLASH Supported devices: CC13xx, CC25xx, CC26xx, CC3x20, CC3x30, CC3x35, Tiva, C2000, MSP43x, Hercules, PGA9xx, IWR12xx, IWR14xx, IWR16xx, IWR18xx , IWR68xx, AWR12xx, AWR14xx, AWR16xx, AWR18xx.  Command line only: AM335x, AM437x, AM571x, AM572x, AM574x, AM65XX, K2G

CCS Uniflash is a standalone tool used to (...)

Design tools & simulation

CALCULATION TOOL Download
Pin mux tool
PINMUXTOOL The PinMux Utility is a software tool which provides a Graphical User Interface for configuring pin multiplexing settings, resolving conflicts and specifying I/O cell characteristics for TI MPUs. Results are output as C header/code files that can be imported into software development kits (SDKs) or (...)
DESIGN TOOL Download
Hardware design reviews for SimpleLink™ Wi-Fi devices
SIMPLELINK-WIFI-DESIGN-REVIEWS — To get started with the CC3XXX Wi-Fi hardware design review process: 
  • Step 1:  Before requesting a review, it is important that to review the technical documentation and design & development resources available on the corresponding product page (see CC3XXX product page links below).
  • Step 2: Download and (...)
GERBER FILE Download
SWRC294.ZIP (3477 KB)
CERTIFICATION Download
Radio certification for SimpleLink™ CC3XXX
SIMPLELINK-CC3XXX-CERTIFICATION Are you looking for CC31XX or CC32XX certification support? SIMPLELINK-CC3XXX-CERTIFCATION provides the relevant information and support for successful certification of your product. Within this page you will find the latest certification reports of our Modules as well as our evaluation boards for (...)
Features
  • The SIMPLELINK-CC3XXX-REPORTS link provides access to SimpleLink CC3xxx certification reports for:
    • CC3xxx modules
    • CC3xxx evaluation boards (note: reports for evaluation boards are for reference only)
  • The SIMPLELINK-CC3XXX-REQUEST link provides
    • A TI letter of authorization for FCC and ISED when requested (...)

Reference designs

参考设计 Download
SimpleLink Wi-Fi Antenna Selection
TIDC-CC3ANTENNA-SELECTION The SimpleLink™ Wi-Fi® Antenna BoosterPack (CC3ANTENNABOOST) enables evaluation and development of end applications requiring antenna diversity. When used with the SimpleLink Wi-Fi CC3200 Launchpad (CC3200-LAUNCHXL) or the CC3100 Boosterpack (CC3100BOOST) rev 3.1 or higher, the user can select the (...)
document-generic Schematic
参考设计 Download
SimpleLink™ Wi-Fi® CC3200 Module LaunchPad
TIDC-CC3200MODLAUNCHXL The CC3200MODLAUNCHXL is a low-cost evaluation platform which hosts the CC3200MOD. The SimpleLink™ CC3200MOD is a wireless microcontroller (MCU) module that integrates an ARM® Cortex™-M4 based MCU, allowing customers to develop an entire application using a single device. The module (...)
document-generic Schematic
参考设计 Download
Wi-Fi Audio Streaming Application for SimpleLink Wi-Fi CC3200 Launchpad
TIDC-CC3200AUDBOOST This SimpleLink Wi-Fi CC3200 LaunchPad and Audio BoosterPack design brings Wi-Fi audio streaming capability to new applications as well as existing ones such as HD digital speakers. It enables the capture, streaming and playback of audio from a digital microphone or a stereo/mono audio jack to (...)
document-generic Schematic
参考设计 Download
SimpleLink™ CC32xx-OV788 Video/Audio Streaming Over Wi-Fi Reference Design
TIDC-CC3200-VIDEO — The design enables OV788 ultra-low power video compression chip users to bring live streaming capabilities of audio and video data over Wi-Fi® very easily. It showcases a single chip implementation of RTP video streaming + Wi-Fi connection on the SimpleLink™ CC3200 Wi-Fi wireless (...)
document-generic Schematic
参考设计 Download
Isolated RS-485 to Wi-Fi Bridge with 24 VAC Power Reference Design
TIDA-00486 The TIDA-00486 TI Design uses Texas Instruments SimpleLink Wi-Fi CC3200 Internet-on-a-chip Wireless MCU module to create a data bridge between an RS-485 network and a Wi-Fi network. An ISO15 transceiver provides an isolated RS-485 interface with up to 2500 VRMS of isolation. The LM5160 (...)
document-generic Schematic
参考设计 Download
Non-Isolated RS-485 to Wi-Fi Bridge with 24 VAC Power Reference Design
TIDA-00485 The TIDA-00485 TI Design uses Texas Instruments SimpleLink Wi-Fi CC3200 Internet-on-a-chip Wireless MCU module to create a data bridge between an RS-485 network and a Wi-Fi network. An SN65HVD72 transceiver provides the RS-485 Interface with 12 kV of ESD protection, and additional protection is (...)
document-generic Schematic
参考设计 Download
UART to Wi-Fi Bridge with 24 VAC Power Reference Design
TIDA-00375 The TIDA-00375 TI Design uses Texas Instruments SimpleLink Wi-Fi CC3200 Internet-on-a-chip Wireless MCU module to create a data bridge between existing hardware with a logic-level UART interface and a Wi-Fi network. The design also contains a Simple Switcher power supply with a wide input range (...)
document-generic Schematic
参考设计 Download
Smart Plug with Remote Disconnect and Wi-Fi Connectivity
TIDC-SMARTPLUG-WIFI This design implements single-outlet energy measurement with remote connect/disconnect capability and Wi-Fi connectivity. Designers can quickly create networked load control devices for industrial building and home automation applications.
document-generic Schematic

CAD/CAE symbols

Package Pins Download
QFM (MOB) 63 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos