OPA454
- Wide Power-Supply Range:
±5 V (10 V) to ±50 V (100 V) - High-Output Load Drive: IO > ±50 mA
- Wide Output Voltage Swing: 1 V to Rails
- Independent Output Disable or Shutdown
- Wide Temperature Range: –40°C to +85°C
- 8-Pin SO Package
The OPA454 device is a low-cost operational amplifier with high voltage (100 V) and relatively high current drive (50 mA). It is unity-gain stable and has a gain-bandwidth product of 2.5 MHz.
The OPA454 is internally protected against overtemperature conditions and current overloads. It is fully specified to perform over a wide power-supply range of ±5 V to ±50 V or on a single supply of 10 V to 100 V. The status flag is an open-drain output that allows it to be easily referenced to standard low-voltage logic circuitry. This high-voltage operational amplifier provides excellent accuracy, wide output swing, and is free from phase inversion problems that are often found in similar amplifiers.
The output can be independently disabled using the Enable or Disable Pin that has its own common return pin to allow easy interface to low-voltage logic circuitry. This disable is accomplished without disturbing the input signal path, not only saving power but also protecting the load.
Featured in a small exposed metal pad package, the OPA454 is easy to heatsink over the extended industrial temperature range, –40°C to +85°C.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | OPA454 High-Voltage (100-V), High-Current (50-mA) Operational Amplifiers, G = 1 Stable datasheet (Rev. B) | PDF | HTML | 2016/3/31 | ||
| Application brief | How to Select Precision Amplifiers for Semiconductor Testers (Rev. A) | PDF | HTML | 2020/12/3 | |||
| 電子書 | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 2017/3/28 | |||
| 應用說明 | Power Amplifier Stress and Power Handling Limitations | 2000/9/27 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。
除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。
TIDA-010962 — 自動測試設備 (ATE) 80V 離散式浮動 VI 參考設計
此參考設計展現四象限離散式浮動電壓與電流 (VI) 設計。電壓輸出支援 ±40V 和 0V 至 80V 範圍，並提供 500mA、10mA 和 10μA 三種電流範圍。此設計可在強制電壓 (FV)、強制電流 (FI)、緩衝器及具有類比回饋迴路的 Gang 模式下運作。憑藉 20 位元強制數位轉類比轉換器 (DAC) 和 18 位元、2 通道類比轉數位轉換器 (ADC) 以及精密訊號鏈，該參考設計可實現校準後控制與測量具備 0.01% 準確度。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| HSOIC (DDA) | 8 | Ultra Librarian |