首頁 放大器 電流感測放大器 數位電源監測器
首頁
放大器
電流感測放大器
數位電源監測器

INA209

現行

具類比比較器的 26V、12 位元、i2c 輸出電流/電壓/電源監控器

立即訂購
產品規格表

INA209

現行
產品規格表 立即訂購

產品詳細資料

Common-mode voltage (max) (V) 26 Common-mode voltage (min) (V) 0 Digital interface I2C, SMBus Resolution (Bits) 12 Input offset (±) (max) (µV) 100 Input offset drift (±) (max) (µV/°C) 0.5 Input offset drift (±) (typ) (µV/°C) 0.1 Voltage gain (V/V) 0.125, 0.25, 0.5, 1 CMRR (min) (dB) 120 Iq (max) (mA) 1.5 Gain error (%) 0.5 Gain error drift (±) (max) (ppm/°C) 83, 167 Features Alert Function, Bidirectional, Intergrated Power Monitor, Low-side Capable, Programmable Gain Number of channels 1 Power measurement accuracy (%) 1 Rating Catalog Operating temperature range (°C) -40 to 125
Common-mode voltage (max) (V) 26 Common-mode voltage (min) (V) 0 Digital interface I2C, SMBus Resolution (Bits) 12 Input offset (±) (max) (µV) 100 Input offset drift (±) (max) (µV/°C) 0.5 Input offset drift (±) (typ) (µV/°C) 0.1 Voltage gain (V/V) 0.125, 0.25, 0.5, 1 CMRR (min) (dB) 120 Iq (max) (mA) 1.5 Gain error (%) 0.5 Gain error drift (±) (max) (ppm/°C) 83, 167 Features Alert Function, Bidirectional, Intergrated Power Monitor, Low-side Capable, Programmable Gain Number of channels 1 Power measurement accuracy (%) 1 Rating Catalog Operating temperature range (°C) -40 to 125
TSSOP (PW) 16 32 mm² (5 mm × 6.4 mm)
  • SENSES BUS VOLTAGES FROM 0V TO +26V
  • REPORTS CURRENT, VOLTAGE, AND POWER; STORES PEAKS
  • TRIPLE WATCHDOG LIMITS:
    • Lower Warning with Delay
    • Upper Over-limit, No Delay
    • Fast Analog Critical
  • HIGH ACCURACY: 1% MAX OVER TEMP
  • APPLICATIONS
    • SERVERS
    • TELECOM EQUIPMENT
    • AUTOMOTIVE
    • POWER MANAGEMENT
    • BATTERY CHARGERS
    • WELDING EQUIPMENT
    • POWER SUPPLIES
    • TEST EQUIPMENT

I2C is a trademark of NXP Semiconductors.
All other trademarks are the property of their respective owners.
  • SENSES BUS VOLTAGES FROM 0V TO +26V
  • REPORTS CURRENT, VOLTAGE, AND POWER; STORES PEAKS
  • TRIPLE WATCHDOG LIMITS:
    • Lower Warning with Delay
    • Upper Over-limit, No Delay
    • Fast Analog Critical
  • HIGH ACCURACY: 1% MAX OVER TEMP
  • APPLICATIONS
    • SERVERS
    • TELECOM EQUIPMENT
    • AUTOMOTIVE
    • POWER MANAGEMENT
    • BATTERY CHARGERS
    • WELDING EQUIPMENT
    • POWER SUPPLIES
    • TEST EQUIPMENT

I2C is a trademark of NXP Semiconductors.
All other trademarks are the property of their respective owners.

The INA209 is a high-side current shunt and power monitor with an I2C interface. The INA209 monitors both shunt drop and shunt bus voltage. A programmable calibration value, combined with an internal multiplier, enables direct readouts in amperes. An additional multiplying register calculates power in watts. The INA209 features two separate, onboard watchdog capabilities: a warning comparator and an over-limit comparator. The warning comparator is useful for monitoring lower warning limits and incorporates a user-defined delay. The over-limit comparator assists with monitoring upper limits that could require immediate system shutdown.

The INA209 also includes an analog comparator and a programmable digital-to-analog converter (DAC) that combine to provide the fastest possible responses to current overload conditions.

The INA209 can be used together with hot swap controllers that already use a current sense resistor. The INA209 full-scale range can be selected to be either within the hot-swap controller sense limits, or wide enough to include them.

The INA209 senses across shunts on buses that can vary from 0V to 26V. The device uses a single +3V to +5.5V supply, drawing a maximum of 1.5mA of supply current. It is specified for operation from -25°C to +85°C.

The INA209 is a high-side current shunt and power monitor with an I2C interface. The INA209 monitors both shunt drop and shunt bus voltage. A programmable calibration value, combined with an internal multiplier, enables direct readouts in amperes. An additional multiplying register calculates power in watts. The INA209 features two separate, onboard watchdog capabilities: a warning comparator and an over-limit comparator. The warning comparator is useful for monitoring lower warning limits and incorporates a user-defined delay. The over-limit comparator assists with monitoring upper limits that could require immediate system shutdown.

The INA209 also includes an analog comparator and a programmable digital-to-analog converter (DAC) that combine to provide the fastest possible responses to current overload conditions.

The INA209 can be used together with hot swap controllers that already use a current sense resistor. The INA209 full-scale range can be selected to be either within the hot-swap controller sense limits, or wide enough to include them.

The INA209 senses across shunts on buses that can vary from 0V to 26V. The device uses a single +3V to +5.5V supply, drawing a maximum of 1.5mA of supply current. It is specified for operation from -25°C to +85°C.
filter 尋找其它 數位電源監測器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 10
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 High-Side Measurement, Bi-Directional Current/Power Monitor with I2C Interface datasheet (Rev. B) 2009/3/27
應用說明 Using a PCB Copper Trace as a Current Sense Shunt Resistor (Rev. A) PDF | HTML 2026/4/27
應用說明 Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers PDF | HTML 2024/11/18
Application brief Measuring Current for Handle Multiple Out-of-Range Conditions (Rev. C) PDF | HTML 2021/10/4
應用說明 Digital Interfaces for Current Sensing Devices (Rev. A) PDF | HTML 2021/9/30
Application brief Integrated, Current Sensing Analog-to-Digital Converter (Rev. A) PDF | HTML 2021/9/28
應用說明 Getting Started with Digital Power Monitors (Rev. A) PDF | HTML 2021/9/2
應用說明 Understanding the I2C Bus PDF | HTML 2015/6/30
使用指南 USB DIG Platform User's Guide (Rev. A) 2010/2/14
更多文件說明 INA209EVM Quick-Start Guide (Video) (Rev. A) 2008/4/17

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

程式碼範例或展示

SBOC251 — INA209EVM Source Code

支援產品和硬體
驅動程式或資料庫

INA209SW-LINUX — 適用於 INA209 的 Linux 驅動程式

The Linux driver supports the INA209 Current/Power Monitor. The Linux driver supports communication through the I2C bus and interfaces with the Hardware Monitoring sub-system.

Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:
  • ina209
Linux Source (...)
支援產品和硬體
開發模組 (EVM) 的 GUI

SBOC248 — INA209EVM Software

支援產品和硬體
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。

支援產品和硬體
計算工具

CS-AMPLIFIER-ERROR-TOOL — Current Sense Amplifier Comparison and Error Tool

此 Excel 計算機提供兩個與五個標準電流感測放大器的比較，並提供包含各裝置基本參數的圖表。此計算機也會採用使用者的系統條件輸入，例如共模電壓、供應電壓、分流電阻器值與公差，然後在可調整電流範圍中繪製錯誤曲線。此外，計算機會根據計算的全刻度輸入電壓除以最大量測電流，輸出最大分流值 (mΩ)。
支援產品和硬體
計算工具

SBOR021 — Power Monitor Tool

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (PW) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片