首頁 數據轉換器 類比轉數位轉換器 (ADC) 精確 ADC
首頁
數據轉換器
類比轉數位轉換器 (ADC)
精確 ADC

ADS1234

現行

適用於橋接器感測器的 24 位元、80SPS、4 通道（差分）、針腳可編程 ΔΣ ADC

立即訂購
產品規格表

ADS1234

現行
產品規格表 立即訂購

產品詳細資料

Resolution (Bits) 24 Sample rate (max) (ksps) 0.08 Number of input channels 4 Interface type SPI Architecture Delta-Sigma Input type Differential Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 2.5 Input voltage range (min) (V) 0 Features 50/60 Hz Rejection, Oscillator, PGA Operating temperature range (°C) -40 to 105 Power consumption (typ) (mW) 4.3 Analog supply voltage (min) (V) 2.7 Analog supply voltage (max) (V) 5.3 Digital supply (min) (V) 2.7 Digital supply (max) (V) 5.3
Resolution (Bits) 24 Sample rate (max) (ksps) 0.08 Number of input channels 4 Interface type SPI Architecture Delta-Sigma Input type Differential Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 2.5 Input voltage range (min) (V) 0 Features 50/60 Hz Rejection, Oscillator, PGA Operating temperature range (°C) -40 to 105 Power consumption (typ) (mW) 4.3 Analog supply voltage (min) (V) 2.7 Analog supply voltage (max) (V) 5.3 Digital supply (min) (V) 2.7 Digital supply (max) (V) 5.3
TSSOP (PW) 28 62.08 mm² (9.7 mm × 6.4 mm)
  • Complete front-end for bridge sensors
  • 23.5-bits effective resolution at gain = 1
  • 19.2-bits noise-free resolution at gain = 64
  • Low-noise PGA
  • Selectable gains of 1, 2, 64, and 128
  • RMS noise:
    • 17nV at 10SPS at gain = 128
    • 44nV at 80SPS at gain = 128
  • 100dB simultaneous 50Hz and 60Hz rejection
  • Flexible clocking:
    • Low-drift internal oscillator
    • Optional external crystal
  • Selectable 10SPS or 80SPS data rates
  • Easy ratiometric measurements:
    • External voltage reference up to 5V
  • Two-channel differential input with internal temperature sensor (ADS1232)
  • Four-channel differential input (ADS1234)
  • Two-wire serial interface
  • Supply voltage range: 2.7V to 5.3V
  • Temperature range: –40°C to +105°C
  • Packages: TSSOP-24 (ADS1232) or TSSOP-28 (ADS1234)
  • Complete front-end for bridge sensors
  • 23.5-bits effective resolution at gain = 1
  • 19.2-bits noise-free resolution at gain = 64
  • Low-noise PGA
  • Selectable gains of 1, 2, 64, and 128
  • RMS noise:
    • 17nV at 10SPS at gain = 128
    • 44nV at 80SPS at gain = 128
  • 100dB simultaneous 50Hz and 60Hz rejection
  • Flexible clocking:
    • Low-drift internal oscillator
    • Optional external crystal
  • Selectable 10SPS or 80SPS data rates
  • Easy ratiometric measurements:
    • External voltage reference up to 5V
  • Two-channel differential input with internal temperature sensor (ADS1232)
  • Four-channel differential input (ADS1234)
  • Two-wire serial interface
  • Supply voltage range: 2.7V to 5.3V
  • Temperature range: –40°C to +105°C
  • Packages: TSSOP-24 (ADS1232) or TSSOP-28 (ADS1234)

The ADS1232 and ADS1234 (ADS123x) are precision, 24-bit, analog-to-digital converters (ADCs). With a low-noise programmable gain amplifier (PGA), a precision delta-sigma ADC, and internal oscillator. The ADS123x provides a complete front-end solution for bridge sensor applications including weigh scales, strain gauges, and pressure sensors.

An input multiplexer (MUX) accepts either two (ADS1232) or four (ADS1234) differential inputs. The ADS1232 also includes a temperature sensor to monitor ambient temperature. The low-noise PGA has a selectable gain of 1, 2, 64, or 128, supporting a full-scale differential input of ±2.5V, ±1.25V, ±39mV, or ±19.5mV.

The delta-sigma ADC provides a maximum of 23.5-bits effective resolution, and supports two data rates: 10SPS (providing 50Hz and 60Hz rejection) and 80SPS. The ADS123x can be clocked externally using an oscillator or a crystal, or by the internal oscillator.

Offset calibration is performed on-demand, and the ADS123x can be put in a low-power standby mode or shut off completely in power-down mode. The ADS123x are operated through simple pin-driven control—there are no digital registers to program.

Data are output over a two-wire serial interface that connects directly to the MSP430 and other microcontrollers.

The ADS1232 and ADS1234 (ADS123x) are precision, 24-bit, analog-to-digital converters (ADCs). With a low-noise programmable gain amplifier (PGA), a precision delta-sigma ADC, and internal oscillator. The ADS123x provides a complete front-end solution for bridge sensor applications including weigh scales, strain gauges, and pressure sensors.

An input multiplexer (MUX) accepts either two (ADS1232) or four (ADS1234) differential inputs. The ADS1232 also includes a temperature sensor to monitor ambient temperature. The low-noise PGA has a selectable gain of 1, 2, 64, or 128, supporting a full-scale differential input of ±2.5V, ±1.25V, ±39mV, or ±19.5mV.

The delta-sigma ADC provides a maximum of 23.5-bits effective resolution, and supports two data rates: 10SPS (providing 50Hz and 60Hz rejection) and 80SPS. The ADS123x can be clocked externally using an oscillator or a crystal, or by the internal oscillator.

Offset calibration is performed on-demand, and the ADS123x can be put in a low-power standby mode or shut off completely in power-down mode. The ADS123x are operated through simple pin-driven control—there are no digital registers to program.

Data are output over a two-wire serial interface that connects directly to the MSP430 and other microcontrollers.
filter 尋找其它 精確 ADC
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 9
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 ADS123x 2- and 4-Channel, 24-Bit, Delta-Sigma ADCs for Bridge Sensors datasheet (Rev. H) PDF | HTML 2025/6/2
應用說明 Calculating Conversion Latency and System Cycle Time for Delta-Sigma ADCs (Rev. A) PDF | HTML 2024/3/18
應用說明 A Basic Guide to Bridge Measurements (Rev. A) PDF | HTML 2024/3/13
應用說明 Digital Filter Types in Delta-Sigma ADCs (Rev. A) PDF | HTML 2023/3/29
電子書 Fundamentals of Precision ADC Noise Analysis (Rev. A) 2020/6/19
應用說明 Industrial data-acquisition interfaces with digital isolators (Rev. A) 2018/10/2
電子書 Best of Baker's Best: Precision Data Converters -- Delta-Sigma ADCs 2015/3/19
應用說明 Delta-Sigma ADC Design for Bridge Sensor Applications 2011/9/30
白皮書 Complete Front End Solutions for Weigh Scales 2007/6/14

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。

支援產品和硬體
設計工具

ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.

The ADC-TO-VREF-SELECT tool enables the pairing of TI analog-to-digital converters (ADCs) and series voltage references. Users can select an ADC device and the desired reference voltage, and the tool will list up to two voltage reference recommendations.
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (PW) 28 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片