首頁 數據轉換器 類比轉數位轉換器 (ADC) 精確 ADC
首頁
數據轉換器
類比轉數位轉換器 (ADC)
精確 ADC

ADS1282

現行

具 PGA 且適用地震和能源勘探的超高解析度 4-kSPS 2 通道 ΔΣ ADC

立即訂購
產品規格表

ADS1282

現行
產品規格表 立即訂購

產品詳細資料

Resolution (Bits) 31 Sample rate (max) (ksps) 4 Number of input channels 2 Interface type SPI Architecture Delta-Sigma Input type Differential Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 1.15, 3.75 Input voltage range (min) (V) -1.9, 0.7 Features PGA Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 25 Analog supply voltage (min) (V) -2.5, 0 Analog supply voltage (max) (V) 2.5, 5 SNR (dB) 130 Digital supply (min) (V) 1.65 Digital supply (max) (V) 3.6
Resolution (Bits) 31 Sample rate (max) (ksps) 4 Number of input channels 2 Interface type SPI Architecture Delta-Sigma Input type Differential Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 1.15, 3.75 Input voltage range (min) (V) -1.9, 0.7 Features PGA Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 25 Analog supply voltage (min) (V) -2.5, 0 Analog supply voltage (max) (V) 2.5, 5 SNR (dB) 130 Digital supply (min) (V) 1.65 Digital supply (max) (V) 3.6
TSSOP (PW) 28 62.08 mm² (9.7 mm × 6.4 mm)
  • High Resolution:
    130-dB SNR (250 SPS)
  • High Accuracy:
    THD: –122 dB
    INL: 0.5 ppm
  • Low-Noise PGA
  • Two-Channel Input Mux
  • Inherently-Stable Modulator with Fast Responding
    Overrange Detection
  • Flexible Digital Filter:
    Sinc + FIR + IIR (Selectable)
    Linear or Minimum Phase Response
    Programmable High-Pass Filter
    Selectable FIR Data Rates: 250 SPS
    to 4 kSPS
  • Filter Bypass Option
  • Low Power Consumption: 25 mW
    Shutdown: 10 µW
  • Offset and Gain Calibration Engine
  • SYNC Input
  • Analog Supply:
    Unipolar (+5 V) or Bipolar (±2.5 V)
  • Digital Supply: 1.8 V to 3.3 V
  • High Resolution:
    130-dB SNR (250 SPS)
  • High Accuracy:
    THD: –122 dB
    INL: 0.5 ppm
  • Low-Noise PGA
  • Two-Channel Input Mux
  • Inherently-Stable Modulator with Fast Responding
    Overrange Detection
  • Flexible Digital Filter:
    Sinc + FIR + IIR (Selectable)
    Linear or Minimum Phase Response
    Programmable High-Pass Filter
    Selectable FIR Data Rates: 250 SPS
    to 4 kSPS
  • Filter Bypass Option
  • Low Power Consumption: 25 mW
    Shutdown: 10 µW
  • Offset and Gain Calibration Engine
  • SYNC Input
  • Analog Supply:
    Unipolar (+5 V) or Bipolar (±2.5 V)
  • Digital Supply: 1.8 V to 3.3 V

The ADS1282 is an extremely high-performance, single-chip analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (mux). The ADS1282 is suitable for the demanding needs of energy exploration and seismic monitoring environments.

The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post processing filters.

The flexible input MUX provides an additional external input for measurement, as well as internal self-test connections. The PGA features outstanding low noise (5 nV/√Hz) and high input impedance, allowing easy interfacing to geophones and hydrophones over a wide range of gains.

The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration.

The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1282s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source.

Together, the amplifier, modulator, and filter dissipate 25 mW. The ADS1282 is available in a compact TSSOP-28 package and is fully specified from –40°C to +85°C, with a maximum operating range to +125°C.

The ADS1282 is an extremely high-performance, single-chip analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (mux). The ADS1282 is suitable for the demanding needs of energy exploration and seismic monitoring environments.

The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post processing filters.

The flexible input MUX provides an additional external input for measurement, as well as internal self-test connections. The PGA features outstanding low noise (5 nV/√Hz) and high input impedance, allowing easy interfacing to geophones and hydrophones over a wide range of gains.

The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration.

The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1282s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source.

Together, the amplifier, modulator, and filter dissipate 25 mW. The ADS1282 is available in a compact TSSOP-28 package and is fully specified from –40°C to +85°C, with a maximum operating range to +125°C.
filter 尋找其它 精確 ADC
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
ADS1285 現行 適用於地震與近地太空探索的 32 位元、高解析度、雙通道 ΔΣ ADC Higher dynamic range (134 dB) and lower power (4.8 mW)

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 High-Resolution ADC datasheet (Rev. I) 2015/3/6
應用說明 Calculating Conversion Latency and System Cycle Time for Delta-Sigma ADCs (Rev. A) PDF | HTML 2024/3/18
應用說明 Digital Filter Types in Delta-Sigma ADCs (Rev. A) PDF | HTML 2023/3/29
電子書 Fundamentals of Precision ADC Noise Analysis (Rev. A) 2020/6/19

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

支援軟體

ADS1282-C-EXAMPLE-CODE — ADS1282 example C code

Expedite your embedded design using this example C code for the ADS1282
支援產品和硬體
模擬型號

ADS1282 IBIS Model

SBAM093.ZIP (79 KB) - IBIS 模型
支援產品和硬體
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。

支援產品和硬體
設計工具

ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.

The ADC-TO-VREF-SELECT tool enables the pairing of TI analog-to-digital converters (ADCs) and series voltage references. Users can select an ADC device and the desired reference voltage, and the tool will list up to two voltage reference recommendations.
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (PW) 28 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片