ADS9324
- 16-channel, 16-bit Simultaneous Sampling ADC
- 1MSPS throughput on each channel
- Integrated programmable gain amplifier
- 1MΩ analog input impedance
- Supports single-ended and differential inputs
- Input ranges:
- Differential input voltage: ±12.5V, ±10V, ±6.25V, ±5V, ±2.5V
- Common mode voltage: ±12.5V
- Analog bandwidth options: 25kHz and 325kHz
- Open-wire safe inputs
- Near zero ADC output code for floating inputs
- Typical performance:
- INL: ±0.5LSB; DNL: ±0.5LSB
- SNR: 88dB; THD: –103dB; DC CMRR: 100dB
- Low-drift, on-chip reference (4.096V) and buffer
- 15ppm/°C typical temperature drift
- Digital features
- On-chip digital filters for oversampling
- System offset, gain and phase calibration
- Digital window comparators
- ADC output data randomizer
- Power Supply
- Analog supplies: 5V and 1.8V
- Digital I/O supply: 1.8V to 3.3V
- Temperature range: –40°C to +125°C
The ADS9324 is a 16-channel, integrated data acquisition (DAQ) system based on a simultaneous-sampling, 16-bit successive approximation (SAR) analog-to-digital converter (ADC) operating at a maximum of 1MSPS per channel. The device features a complete analog front-end for each channel, including a programmable gain amplifier (PGA) with input impedance of 1MΩ, input clamp, low-pass filter, and an ADC input driver. The device also features a low-drift, precision reference with a buffer to drive the ADC. The high input impedance allows direct connection with sensors and transformers, thus eliminating the need for external driver circuits. The device supports both differential and single-ended inputs, allowing it to be used with various sensor outputs.
The ADS9324 includes a flexible digital interface allowing it to be used with a variety of host controllers. Users can configure the serial interface to read the ADC output on 1-lane, 2-lane, 4-lane, and 8-lane. The device also has flexibility to operate the ADC as 2-CH, 4-CH, 8-CH and 16-CH simultaneous sampling ADC.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | ADS9324 16 -Channel, 16 -Bit, 1MSPS , Simultaneous-Sampling SAR ADC With Integrated Analog Front-End datasheet | PDF | HTML | 2025年 12月 8日 |
| Certificate | ADS9324EVM EU Declaration of Conformity (DoC) | 2025年 7月 18日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
ADS9324EVM — ADS9324 評估模組
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
支援產品和硬體
產品
精密運算放大器 (Vos < 1mV)
一般用途運算放大器
音訊運算放大器
轉阻放大器
高速運算放大器 (GBW ≥ 50 MHz)
功率運算放大器
視訊放大器
線路驅動器
轉導放大器與雷射驅動器
全差分放大器
精確 ADC
生物感測 AFE
高速 ADC (≥10 MSPS)
差分放大器
儀器放大器
類比電流感測放大器
數位電源監測器
配備整合式分流電阻器的類比電流感測放大器
具整合式分流電阻器的數位電源監測器
晶粒與晶圓服務
RF 接收器
RF 發射器
Specialty audio amplifiers
音訊 ADC
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前,建立完整的終端設備設計和解決方案原型,進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中,您可以搜尋 TI (...)
TINA-TI — 基於 SPICE 的類比模擬程式
TIDA-010086 — 數位控制成本最佳化的 10 A 電池化成與測試參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RSK) | 64 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。