Product details

Common mode voltage (Max) (V) 60 Common mode voltage (Min) (V) 2.7 Input offset (+/-) (Max) (uV) 1000 Input offset drift (+/-) (Typ) (uV/C) 1 Gain (V/V) Adjustable Gain error (%) 2 Gain error drift (+/-) (Max) (ppm/°C) 100 CMRR (Min) (dB) 100 Bandwidth (kHz) 440 Supply voltage (Max) (V) 60 Supply voltage (Min) (V) 2.7 Iq (Max) (mA) 0.125 Number of channels (#) 1 Comparators (#) 0 Features Current Output Rating Catalog Operating temperature range (C) -40 to 125
Common mode voltage (Max) (V) 60 Common mode voltage (Min) (V) 2.7 Input offset (+/-) (Max) (uV) 1000 Input offset drift (+/-) (Typ) (uV/C) 1 Gain (V/V) Adjustable Gain error (%) 2 Gain error drift (+/-) (Max) (ppm/°C) 100 CMRR (Min) (dB) 100 Bandwidth (kHz) 440 Supply voltage (Max) (V) 60 Supply voltage (Min) (V) 2.7 Iq (Max) (mA) 0.125 Number of channels (#) 1 Comparators (#) 0 Features Current Output Rating Catalog Operating temperature range (C) -40 to 125
SOT-23 (DBV) 5 5 mm² 2.9 x 1.6
  • Complete Unipolar High-Side Current Measurement Circuit
  • Wide Supply and Common-Mode Range
  • INA139: 2.7 V to 40 V
  • INA169: 2.7 V to 60 V
  • Independent Supply and Input Common-Mode Voltages
  • Single Resistor Gain Set
  • Low Quiescent Current: 60 µA (Typical)
  • 5-Pin, SOT-23 Packages
  • Complete Unipolar High-Side Current Measurement Circuit
  • Wide Supply and Common-Mode Range
  • INA139: 2.7 V to 40 V
  • INA169: 2.7 V to 60 V
  • Independent Supply and Input Common-Mode Voltages
  • Single Resistor Gain Set
  • Low Quiescent Current: 60 µA (Typical)
  • 5-Pin, SOT-23 Packages

The INA139 and INA169 are high-side, unipolar, current shunt monitors. Wide input common-mode voltage range, high-speed, low quiescent current, and tiny SOT-23 packaging enable use in a variety of applications.

Input common-mode and power-supply voltages are independent and can range from 2.7 V to 40 V for the INA139 and 2.7 V to 60 V for the INA169. Quiescent current is only 60 µA, which permits connecting the power supply to either side of the current measurement shunt with minimal error.

The device converts a differential input voltage to a current output. This current is converted back to a voltage with an external load resistor that sets any gain from 1 to over 100. Although designed for current shunt measurement, the circuit invites creative applications in measurement and level shifting.

Both the INA139 and INA169 are available in 5-pin SOT-23 packages. The INA139 device is specified for the –40°C to +125°C temperature range, and the INA169 is specified from –40°C to +85°C.

The INA139 and INA169 are high-side, unipolar, current shunt monitors. Wide input common-mode voltage range, high-speed, low quiescent current, and tiny SOT-23 packaging enable use in a variety of applications.

Input common-mode and power-supply voltages are independent and can range from 2.7 V to 40 V for the INA139 and 2.7 V to 60 V for the INA169. Quiescent current is only 60 µA, which permits connecting the power supply to either side of the current measurement shunt with minimal error.

The device converts a differential input voltage to a current output. This current is converted back to a voltage with an external load resistor that sets any gain from 1 to over 100. Although designed for current shunt measurement, the circuit invites creative applications in measurement and level shifting.

Both the INA139 and INA169 are available in 5-pin SOT-23 packages. The INA139 device is specified for the –40°C to +125°C temperature range, and the INA169 is specified from –40°C to +85°C.

Download

Similar products you might be interested in

open-in-new Compare products
Pin-for-pin with same functionality to the compared device.
INA139 ACTIVE 2.7 to 36V, 440kHz Variable gain current sense amplifier The INA139 is functionally equivalent supporting up to 36 V
INA168 ACTIVE 2.7 to 60V, 800kHz Variable gain current sense amplifier The INA168 is functionally equivalent with lower bandwidth

Technical documentation

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Simulation model

INA169 PSpice Model (Rev. B)

SBOC008B.ZIP (38 KB) - PSpice Model
Simulation model

INA169 TINA-TI Reference Design (Rev. C)

SBOC162C.TSC (82 KB) - TINA-TI Reference Design
Simulation model

INA169 TINA-TI Spice Model (Rev. B)

SBOM223B.ZIP (4 KB) - TINA-TI Spice Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Reference designs

TIDA-01081 — LED-Lighting Control Reference Design for Machine Vision

This LED lighting control reference design demonstrates a unique approach to drive and control a string of multiple high-power light-emitting diodes (LEDs). This reference design is targeted for industrial machine vision systems and is also suitable for other industrial or automotive lighting (...)
Reference designs

PMP9010 — Range boost converter reference design to drive two strings of automotive LEDs

This wide input voltage range boost operates from an input of 9V - 32V and regulates current in two strings of 13 LEDs. A second control loop monitors and regulates the input current during drop outs or faults. Discrete linear regulators at the bottom of each string control the individual string (...)
Reference designs

PMP8948 — Automotive Range Boost Converter Drives Two Strings of LEDs Reference Design

This wide input voltage range boost operates from an input of 9V - 32V and regulates current in two strings of 13 LEDs. Additionally, a second control loop monitors and regulates the input current during drop outs or faults. This low cost design operates at greater than 94% efficiency.
Package Pins Download
SOT-23 (DBV) 5 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos