Product details

Number of channels (#) 1 Total supply voltage (Min) (+5V=5, +/-5V=10) 5 Total supply voltage (Max) (+5V=5, +/-5V=10) 36 GBW (Typ) (MHz) 40 Slew rate (Typ) (V/us) 27 Rail-to-rail Out Vos (offset voltage @ 25 C) (Max) (mV) 0.5 Iq per channel (Typ) (mA) 3.6 Vn at 1 kHz (Typ) (nV/rtHz) 1.1 Features Burr-Brown™ Audio, Premium Sound THD + N @ 1 kHz (Typ) (%) 0.000015 Rating Catalog Operating temperature range (C) -40 to 85 Output current (Typ) (mA) 55 Product type Ultimate Architecture Bipolar CMRR (Typ) (dB) 120 Input bias current (Max) (pA) 250000
Number of channels (#) 1 Total supply voltage (Min) (+5V=5, +/-5V=10) 5 Total supply voltage (Max) (+5V=5, +/-5V=10) 36 GBW (Typ) (MHz) 40 Slew rate (Typ) (V/us) 27 Rail-to-rail Out Vos (offset voltage @ 25 C) (Max) (mV) 0.5 Iq per channel (Typ) (mA) 3.6 Vn at 1 kHz (Typ) (nV/rtHz) 1.1 Features Burr-Brown™ Audio, Premium Sound THD + N @ 1 kHz (Typ) (%) 0.000015 Rating Catalog Operating temperature range (C) -40 to 85 Output current (Typ) (mA) 55 Product type Ultimate Architecture Bipolar CMRR (Typ) (dB) 120 Input bias current (Max) (pA) 250000
SOIC (D) 8 19 mm² 3.91 x 4.9
  • Superior Sound Quality
  • Ultralow Noise: 1.1 nV/√Hz at 1 kHz
  • Ultralow Distortion:
    0.000015% at 1 kHz
  • High Slew Rate: 27 V/μs
  • Wide Bandwidth: 40 MHz (G = +1)
  • High Open-Loop Gain: 130 dB
  • Unity Gain Stable
  • Low Quiescent Current:
    3.6 mA per Channel
  • Rail-to-Rail Output
  • Wide Supply Range: ±2.25 V to ±18 V
  • Single and Dual Versions Available
  • Superior Sound Quality
  • Ultralow Noise: 1.1 nV/√Hz at 1 kHz
  • Ultralow Distortion:
    0.000015% at 1 kHz
  • High Slew Rate: 27 V/μs
  • Wide Bandwidth: 40 MHz (G = +1)
  • High Open-Loop Gain: 130 dB
  • Unity Gain Stable
  • Low Quiescent Current:
    3.6 mA per Channel
  • Rail-to-Rail Output
  • Wide Supply Range: ±2.25 V to ±18 V
  • Single and Dual Versions Available

The OPA1611 (single) and OPA1612 (dual) bipolar-input operational amplifiers achieve very low 1.1-nV/√Hz noise density with an ultralow distortion of 0.000015% at 1 kHz. The OPA1611 and OPA1612 offer rail-to-rail output swing to within 600 mV with a 2-kΩ load, which increases headroom and maximizes dynamic range. These devices also have a high output drive capability of ±30 mA.

These devices operate over a very wide supply range of ±2.25 V to ±18 V, on only 3.6 mA of supply current per channel. The OPA1611 and OPA1612 op amps are unity-gain stable and provide excellent dynamic behavior over a wide range of load conditions.

The dual version features completely independent circuitry for lowest crosstalk and freedom from interactions between channels, even when overdriven or overloaded.

Both the OPA1611 and OPA1612 are available in SOIC-8 packages and the OPA1612 is available in SON-8. These devices are specified from –40°C to +85°C.

The OPA1611 (single) and OPA1612 (dual) bipolar-input operational amplifiers achieve very low 1.1-nV/√Hz noise density with an ultralow distortion of 0.000015% at 1 kHz. The OPA1611 and OPA1612 offer rail-to-rail output swing to within 600 mV with a 2-kΩ load, which increases headroom and maximizes dynamic range. These devices also have a high output drive capability of ±30 mA.

These devices operate over a very wide supply range of ±2.25 V to ±18 V, on only 3.6 mA of supply current per channel. The OPA1611 and OPA1612 op amps are unity-gain stable and provide excellent dynamic behavior over a wide range of load conditions.

The dual version features completely independent circuitry for lowest crosstalk and freedom from interactions between channels, even when overdriven or overloaded.

Both the OPA1611 and OPA1612 are available in SOIC-8 packages and the OPA1612 is available in SON-8. These devices are specified from –40°C to +85°C.

Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 9
Type Title Date
* Data sheet OPA161x SoundPlus High-Performance, Bipolar-Input Audio Operational Amplifiers datasheet (Rev. C) 27 Aug 2014
Application note Understanding Op Amp Noise in Audio Circuits 14 Jun 2021
Technical article No headroom, no problem: buffering and filtering an audio signal chain in low-voltage systems 11 Apr 2019
E-book The Signal e-book: A compendium of blog posts on op amp design topics 28 Mar 2017
Technical article Amp up your cans: Is your op amp stable? (Part 2) 22 Jan 2016
Technical article Stress-induced outbursts: Microphonics in ceramic capacitors (Part 2) 23 Dec 2014
Technical article Stress-induced outbursts: Microphonics in ceramic capacitors (Part 1) 19 Dec 2014
Application note Compensate Transimpedance Amplifiers Intuitively (Rev. A) 30 Mar 2005
Application note Feedback Plots Define Op Amp AC Performance 27 Sep 2000

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Simulation model

OPA161x PSpice Model (Rev. F)

SBOM396F.ZIP (27 KB) - PSpice Model
Simulation model

OPA161x TINA-TI SPICE Model (Rev. F)

SBOM397F.ZIP (11 KB) - TINA-TI Spice Model
Simulation model

OPA161x TINA-TI Reference Design (Rev. F)

SBOM398F.TSC (302 KB) - TINA-TI Reference Design
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Calculation tool

ANALOG-ENGINEER-CALC — Analog engineer's calculator

The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
Package Pins Download
SOIC (D) 8 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos