Home Amplifiers Difference amplifiers
Home
Amplifiers
Difference amplifiers

INA149-EP

ACTIVE

Enhanced Product High Common Mode Voltage Difference Amplifier

Order now
Data sheet

INA149-EP

ACTIVE
Data sheet Order now

Product details

Number of channels 1 Vs (min) (V) 2 Vs (max) (V) 18 CMRR (min) (dB) 84 Common-mode input low (min) (V) -275 Common-mode input high (max) (V) 275 Input offset (±) (max) (V) 0.0035 Iq (typ) (mA) 0.81 Slew rate (typ) (V/µs) 5 Voltage gain (min) (V/V) 1 Voltage gain (max) (V/V) 1 Small-signal bandwidth (typ) (Hz) 500000 Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125 Gain drift (max) (ppm/°C) 10 Gain error (±) (max) (%) 0.047
Number of channels 1 Vs (min) (V) 2 Vs (max) (V) 18 CMRR (min) (dB) 84 Common-mode input low (min) (V) -275 Common-mode input high (max) (V) 275 Input offset (±) (max) (V) 0.0035 Iq (typ) (mA) 0.81 Slew rate (typ) (V/µs) 5 Voltage gain (min) (V/V) 1 Voltage gain (max) (V/V) 1 Small-signal bandwidth (typ) (Hz) 500000 Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125 Gain drift (max) (ppm/°C) 10 Gain error (±) (max) (%) 0.047
SOIC (D) 8 29.4 mm² 4.9 x 6
  • Common-Mode Voltage Range: ±275 V
  • Minimum CMRR: 84 dB from –55°C to +125°C
  • DC Specifications:
    • Maximum Offset Voltage: 3500 µV
    • Maximum Gain Error: 0.047%
    • Maximum Gain Nonlinearity: 0.001% FSR at 25°C
  • AC Performance:
    • Bandwidth: 500 kHz
    • Typical Slew Rate: 5 V/µs
  • Wide Supply Range: ±2.0 V to ±18 V
    • Maximum Quiescent Current: 1100 µA
    • Output Swing on ±15-V Supplies: ±13.5 V
  • Input Protection:
    • Common-Mode: ±500 V
    • Differential: ±500 V
  • Common-Mode Voltage Range: ±275 V
  • Minimum CMRR: 84 dB from –55°C to +125°C
  • DC Specifications:
    • Maximum Offset Voltage: 3500 µV
    • Maximum Gain Error: 0.047%
    • Maximum Gain Nonlinearity: 0.001% FSR at 25°C
  • AC Performance:
    • Bandwidth: 500 kHz
    • Typical Slew Rate: 5 V/µs
  • Wide Supply Range: ±2.0 V to ±18 V
    • Maximum Quiescent Current: 1100 µA
    • Output Swing on ±15-V Supplies: ±13.5 V
  • Input Protection:
    • Common-Mode: ±500 V
    • Differential: ±500 V

The INA149 is a precision unity-gain difference amplifier with a very high input common-mode voltage range. It is a single, monolithic device that consists of a precision op amp and an integrated thin-film resistor network. The INA149 can accurately measure small differential voltages in the presence of common-mode signals up to ±275 V. The INA149 inputs are protected from momentary common-mode or differential overloads of up to
500 V.

In many applications, where galvanic isolation in not required, the INA149 can replace isolation amplifiers. This ability can eliminate costly isolated input side power supplies and the associated ripple, noise, and quiescent current. The excellent 0.0005% nonlinearity and 500-kHz bandwidth of the INA149 are superior to those of conventional isolation amplifiers.

The INA149 is pin-compatible with the INA117 and INA148 type high common-mode voltage amplifiers and offers improved performance over both devices. The INA149 is available in the SOIC-8 package with operation specified over the military temperature range of –55°C to +125°C.

The INA149 is a precision unity-gain difference amplifier with a very high input common-mode voltage range. It is a single, monolithic device that consists of a precision op amp and an integrated thin-film resistor network. The INA149 can accurately measure small differential voltages in the presence of common-mode signals up to ±275 V. The INA149 inputs are protected from momentary common-mode or differential overloads of up to
500 V.

In many applications, where galvanic isolation in not required, the INA149 can replace isolation amplifiers. This ability can eliminate costly isolated input side power supplies and the associated ripple, noise, and quiescent current. The excellent 0.0005% nonlinearity and 500-kHz bandwidth of the INA149 are superior to those of conventional isolation amplifiers.

The INA149 is pin-compatible with the INA117 and INA148 type high common-mode voltage amplifiers and offers improved performance over both devices. The INA149 is available in the SOIC-8 package with operation specified over the military temperature range of –55°C to +125°C.
filter Find other Difference amplifiers
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Same functionality with different pin-out to the compared device
INA117 ACTIVE High Common-Mode Voltage Difference Amplifier Industrial alternative with lower common mode input range (±200)

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 4
Top documentation Type Title Format options Date
* Data sheet High Common-Mode Voltage Difference Amplifier, INA149-EP datasheet (Rev. A) 02 Apr 2012
* VID INA149-EP VID V6212614 21 Jun 2016
* Radiation & reliability report INA149AMDREP Reliability Report 07 May 2012
E-book The Signal e-book: A compendium of blog posts on op amp design topics 28 Mar 2017

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DIP-ADAPTER-EVM — DIP adapter evaluation module

Speed up your op amp prototyping and testing with the DIP adapter evaluation module (DIP-ADAPTER-EVM), which provides a fast, easy and inexpensive way to interface with small surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them (...)

User guide: PDF
Not available on TI.com
Simulation model

INA149 PSpice Model

SBOMC47.ZIP (77 KB) - PSpice Model
Download
Simulation model

INA149 TINA-TI Reference Design

SBOM667.TSC (164 KB) - TINA-TI Reference Design
Download
Simulation model

INA149 TINA-TI Spice Model

SBOM668.ZIP (9 KB) - TINA-TI Spice Model
Download
Calculation tool

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

Supported products & hardware

Supported products & hardware
Launch Download
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
View Options
Package Pins CAD symbols, footprints & 3D models
SOIC (D) 8 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos