Home Amplifiers Operational amplifiers (op amps) High-speed op amps (GBW ≥ 50 MHz)
Home
Amplifiers
Operational amplifiers (op amps)
High-speed op amps (GBW ≥ 50 MHz)

OPA814

ACTIVE

600-MHz, high-precision unity-gain-stable FET-input operational amplifier

Order now
Data sheet

OPA814

ACTIVE
Data sheet Order now

Product details

Architecture FET / CMOS Input, Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 6 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12.6 GBW (typ) (MHz) 250 BW at Acl (MHz) 600 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 750 Vn at flatband (typ) (nV√Hz) 5.3 Vn at 1 kHz (typ) (nV√Hz) 9.5 Iq per channel (typ) (mA) 16 Vos (offset voltage at 25°C) (max) (mV) 0.25 Rail-to-rail No Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 100 Input bias current (max) (pA) 20 Offset drift (typ) (µV/°C) 1 Iout (typ) (mA) 70 2nd harmonic (dBc) -110 3rd harmonic (dBc) -130 Frequency of harmonic distortion measurement (MHz) 1
Architecture FET / CMOS Input, Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 6 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12.6 GBW (typ) (MHz) 250 BW at Acl (MHz) 600 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 750 Vn at flatband (typ) (nV√Hz) 5.3 Vn at 1 kHz (typ) (nV√Hz) 9.5 Iq per channel (typ) (mA) 16 Vos (offset voltage at 25°C) (max) (mV) 0.25 Rail-to-rail No Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 100 Input bias current (max) (pA) 20 Offset drift (typ) (µV/°C) 1 Iout (typ) (mA) 70 2nd harmonic (dBc) -110 3rd harmonic (dBc) -130 Frequency of harmonic distortion measurement (MHz) 1
SOIC (D) 8 29.4 mm² 4.9 x 6 SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8
  • Wide bandwidth:
    • Gain-bandwidth product: 250 MHz
    • Bandwidth (G = 1 V/V): 600 MHz
    • Large-signal bandwidth (2 V PP): 200 MHz
    • Slew rate: 750 V/µs
  • High precision:
    • Input offset voltage: 250 µV (maximum)
    • Input offset voltage drift: 3.5 µV/°C (maximum)
  • Input voltage noise: 5.3 nV/√Hz
  • Input bias current: 2 pA
  • Low distortion (R L = 100 Ω, V O = 2 V PP):
    • HD2, HD3 at 10 MHz: –75 dBc, –85 dBc
  • Supply range: 6 V to 12.6 V
  • Supply current: 16 mA
  • Performance upgrade to OPA656
  • Wide bandwidth:
    • Gain-bandwidth product: 250 MHz
    • Bandwidth (G = 1 V/V): 600 MHz
    • Large-signal bandwidth (2 V PP): 200 MHz
    • Slew rate: 750 V/µs
  • High precision:
    • Input offset voltage: 250 µV (maximum)
    • Input offset voltage drift: 3.5 µV/°C (maximum)
  • Input voltage noise: 5.3 nV/√Hz
  • Input bias current: 2 pA
  • Low distortion (R L = 100 Ω, V O = 2 V PP):
    • HD2, HD3 at 10 MHz: –75 dBc, –85 dBc
  • Supply range: 6 V to 12.6 V
  • Supply current: 16 mA
  • Performance upgrade to OPA656

The OPA814 is a unity-gain stable, voltage-feedback operational amplifier for high-speed, high-precision, and wide-dynamic-range applications.

The OPA814 has a low-noise junction gate field-effect transistor (JFET) input stage that features a wide gain bandwidth of 250 MHz and a supply range from 6 V to 12.6 V. The fast slew rate of 750 V/µs allows a wide large-signal bandwidth and low distortion when used as high impedance buffer in high-speed digitizers, active probes, and other test and measurement applications.

The OPA814 offers extremely low input offset voltage of ±250 µV and offset voltage drift of ±3.5-µV/°C. The combination of picoamperes of input bias current and low input voltage noise (5.3 nV/√ Hz) makes the OPA814 an excellent wideband transimpedance amplifier in optical test and communication equipment, as well as medical and scientific instrumentation.

The OPA814 is available in an 8-pin SOIC package. This device is specified to operate over the industrial temperature range of –40°C to +85°C.

The OPA814 is a unity-gain stable, voltage-feedback operational amplifier for high-speed, high-precision, and wide-dynamic-range applications.

The OPA814 has a low-noise junction gate field-effect transistor (JFET) input stage that features a wide gain bandwidth of 250 MHz and a supply range from 6 V to 12.6 V. The fast slew rate of 750 V/µs allows a wide large-signal bandwidth and low distortion when used as high impedance buffer in high-speed digitizers, active probes, and other test and measurement applications.

The OPA814 offers extremely low input offset voltage of ±250 µV and offset voltage drift of ±3.5-µV/°C. The combination of picoamperes of input bias current and low input voltage noise (5.3 nV/√ Hz) makes the OPA814 an excellent wideband transimpedance amplifier in optical test and communication equipment, as well as medical and scientific instrumentation.

The OPA814 is available in an 8-pin SOIC package. This device is specified to operate over the industrial temperature range of –40°C to +85°C.
filter Find other High-speed op amps (GBW ≥ 50 MHz)
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 5
Top documentation Type Title Format options Date
* Data sheet OPA814600-MHz, High-Precision, Unity-Gain Stable, FET-Input Operational Amplifier datasheet (Rev. A) PDF | HTML 06 Nov 2023
Product overview High Speed Amplifiers for Motor Encoders and Position Sensing PDF | HTML 11 Apr 2025
Product overview High Speed Amplifiers for In-Vitro Diagnostics (IVD) Analog Front End PDF | HTML 10 Apr 2025
Product overview Pairing High-Speed JFET Amplifiers With Hi-Z DAQ Systems PDF | HTML 08 Apr 2024
Application note Noise Analysis for High Speed Op Amps (Rev. A) 17 Jan 2005

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DEM-OPA-DTK-EVM — Evaluation module for high-speed, wide-bandwidth op amp in 8-pin SON (DTK and DRG) packages

The DEM-OPA-DTK-EVM is a demonstration fixture that helps designers evaluate the operation and performance of our high-speed, wide-bandwidth operational amplifiers. This unpopulated board is compatible with single-channel amplifier products offered in the 8-pin SON (DTK and DRG) packages. The board (...)

User guide: PDF | HTML
Not available on TI.com
Evaluation board

DEM-OPA-SO-1A — Single op-amp evaluation module for SO-8 package

The DEM-OPA-SO-1A demonstration fixture helps designers evaluate the operation and performance of TI's High Speed, Wide Bandwidth Operational Amplifiers. This unpopulated PC board is compatible with products offered in the 8-lead SOIC (D) package.

User guide: PDF
Not available on TI.com
Evaluation board

DEM-OPA-SOT-1A — Single operational amplifier evaluation module for SOT-23 5-pin and 6-pin packages

DEM-OPA-SOT-1A is a demonstration board that evaluates the operation and performance of high-speed, wide-bandwidth operational amplifiers. This unpopulated PC board is compatible with products offered in the small-outline transistor (SOT) DBV package.

User guide: PDF
Not available on TI.com
Simulation model

OPA814 TINA-TI Reference Design

SBOMCE1.ZIP (15 KB) - TINA-TI Reference Design
Download
Calculation tool

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

Supported products & hardware

Supported products & hardware
Launch Download
Calculation tool

VOLT-DIVIDER-CALC — Voltage divider calculation tool

The voltage divider calculation tool (VOLT-DIVIDER-CALC) quickly determines a set of resistors for a voltage divider. This KnowledgeBase JavaScript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. VOLT-DIVIDER-CALC can also be used to (...)
Design now
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
View Options
Package Pins CAD symbols, footprints & 3D models
SOIC (D) 8 Ultra Librarian
SOT-23 (DBV) 5 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos