ADS7828

ACTIVE

12-Bit, 8-Channel SAR ADC with Internal Reference and I2C Interface

Top

Product details

Parameters

Resolution (Bits) 12 Number of input channels 8 Sample rate (Max) (kSPS) 50 Interface I2C Architecture SAR Input type Pseudo-Differential, Single-Ended Multi-channel configuration Multiplexed Rating Catalog Reference mode Ext, Int Input range (Max) (V) 5.25 Input range (Min) (V) 0 Features Operating temperature range (C) -40 to 85 Power consumption (Typ) (mW) 0.675 Analog voltage AVDD (Min) (V) 2.7 SNR (dB) 72 Analog voltage AVDD (Max) (V) 5.25 INL (Max) (+/-LSB) 1 Digital supply (Min) (V) 2.7 Digital supply (Max) (V) 5.25 Approx. price (US$) 3.15 | 1ku open-in-new Find other Precision ADCs (<=10MSPS)

Package | Pins | Size

TSSOP (PW) 16 22 mm² 4.4 x 5 open-in-new Find other Precision ADCs (<=10MSPS)

Features

  • 8-CHANNEL MULTIPLEXER
  • 50kHz SAMPLING RATE
  • NO MISSING CODES
  • 2.7V TO 5V OPERATION
  • INTERNAL 2.5V REFERENCE
  • I2C INTERFACE SUPPORTS:
    Standard, Fast, and High-Speed Modes
  • TSSOP-16 PACKAGE
  • APPLICATIONS
    • VOLTAGE-SUPPLY MONITORING
    • ISOLATED DATA ACQUISITION
    • TRANSDUCER INTERFACES
    • BATTERY-OPERATED SYSTEMS
    • REMOTE DATA ACQUISITION

I2C is a trademark of Koninklijke Philps Electronics N.V. All other trademarks are the property of their respective owners.

open-in-new Find other Precision ADCs (<=10MSPS)

Description

The ADS7828 is a single-supply, low-power, 12-bit data acquisition device that features a serial I2C interface and an 8-channel multiplexer. The Analog-to-Digital (A/D) converter features a sample-and-hold amplifier and internal, asynchronous clock. The combination of an I2C serial, 2-wire interface and micropower consumption makes the ADS7828 ideal for applications requiring the A/D converter to be close to the input source in remote locations and for applications requiring isolation. The ADS7828 is available in a TSSOP-16 package.

open-in-new Find other Precision ADCs (<=10MSPS)
Download

Technical documentation

= Featured
No results found. Please clear your search and try again. View all 5
Type Title Date
* Datasheet 12-Bit, 8-Channel Sampling Analog-to-Digital Converter with I2C Interface datasheet (Rev. C) Mar. 30, 2005
More literature Best of Baker's Best: Precision Data Converters -- SAR ADCs May 21, 2015
Application notes Determining Minimum Acquisition Times for SAR ADCs, part 2 Mar. 17, 2011
Application notes Determining Minimum Acquisition Times for SAR ADCs, part 1 (Rev. A) Nov. 10, 2010
User guides ADS7823-28EVM Jun. 16, 2004

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
Description

ADC-INPUT-CALC is an online tool that provides support for designing the input buffer to an analog-to-digital converter (ADC). It offers 24 different op-amp based buffer circuits that can be used to drive an ADC input. The available topologies cover differential, single-ended and transformer-coupled (...)

EVALUATION BOARDS Download
document-generic User guide
$49.00
Description

The ADS7823-28EVM is a circuit board for use with two 12-bit single/octal channel, inter-integrated circuit (I2C), serial interface analog-to-digital converters, ADS7823 and ADS7828. Both devices are located on this single printed wiring board, this allows exercising of both devices on a single EVM (...)

Features
  • Full-featured evaluation board for the ADS7823 and ADS7828, single/octal channel analog-to-digital converters
  • Up to eight single-ended or four differential analog inputs
  • Built in reference with buffered output
  • I2C interface
  • Modular EVM form factor for use with a variety of Texas Instruments Processors (...)

Software development

DRIVERS & LIBRARIES Download
Linux Driver for ADS7828
ADS7828SW-LINUX The Linux driver supports the ADS7828 and ADS7830 8-Channel Sampling ADCs. The Linux driver supports communication through the I2C bus and interfaces with the Hardware Monitoring sub-system.

 

Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:

  • (...)

Design tools & simulation

SIMULATION MODELS Download
SBAM143.ZIP (34 KB) - IBIS Model
SIMULATION TOOLS Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide
CALCULATION TOOLS Download
Analog engineer's calculator
ANALOG-ENGINEER-CALC — The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
Features
  • Expedites circuit design with analog-to-digital converters (ADCs) and digital-to-analog converters (DACs)
    • Noise calculations
    • Common unit translation
  • Solves common amplifier circuit design problems
    • Gain selections using standard resistors
    • Filter configurations
    • Total noise for common amplifier configurations
  • (...)

CAD/CAE symbols

Package Pins Download
TSSOP (PW) 16 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​