Home Amplifiers Operational amplifiers (op amps) High-speed op amps (GBW ≥ 50 MHz)
Home
Amplifiers
Operational amplifiers (op amps)
High-speed op amps (GBW ≥ 50 MHz)

OPA4863

PREVIEW

Quad, low-power, 110-MHz RRIO voltage-feedback amplifier

Order now
Data sheet

OPA4863

PREVIEW
Data sheet Order now

Product details

Architecture Voltage FB Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12.6 GBW (typ) (MHz) 50 BW at Acl (MHz) 110 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 105 Vn at flatband (typ) (nV√Hz) 5.9 Vn at 1 kHz (typ) (nV√Hz) 5.9 Iq per channel (typ) (mA) 0.7 Vos (offset voltage at 25°C) (max) (mV) 1.3 Rail-to-rail In, Out Features Output short-circuit protection, Overload power limit, Shutdown Rating Catalog Operating temperature range (°C) -40 to 125 CMRR (typ) (dB) 120 Input bias current (max) (pA) 730000 Offset drift (typ) (µV/°C) 1 Iout (typ) (mA) 30 2nd harmonic (dBc) -129 3rd harmonic (dBc) -138 Frequency of harmonic distortion measurement (MHz) 0.02
Architecture Voltage FB Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12.6 GBW (typ) (MHz) 50 BW at Acl (MHz) 110 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 105 Vn at flatband (typ) (nV√Hz) 5.9 Vn at 1 kHz (typ) (nV√Hz) 5.9 Iq per channel (typ) (mA) 0.7 Vos (offset voltage at 25°C) (max) (mV) 1.3 Rail-to-rail In, Out Features Output short-circuit protection, Overload power limit, Shutdown Rating Catalog Operating temperature range (°C) -40 to 125 CMRR (typ) (dB) 120 Input bias current (max) (pA) 730000 Offset drift (typ) (µV/°C) 1 Iout (typ) (mA) 30 2nd harmonic (dBc) -129 3rd harmonic (dBc) -138 Frequency of harmonic distortion measurement (MHz) 0.02
TSSOP (PW) 14 32 mm² 5 x 6.4
  • Wide-bandwidth
    • Unity-gain bandwidth: 110-MHz (AV= 1 V/V)
    • Gain-bandwidth product: 50-MHz
  • Low power
    • Quiescent current: 700-µA/ch (typical)
    • Power down mode: 1.5-µA (maximum, VS= 3 V)
    • Supply voltage: 2.7-V to 12.6-V
  • Input voltage noise: 5.9-nV/√Hz
  • Slew rate: 105-V/µs
  • Rail-to-rail input and output
  • HD2/HD3: –129 dBc/–138 dBc at 20 kHz (2-VPP)
  • Operating temperature range: –40°C to +125°C
  • Additional features:
    • Overload power limit
    • Output short-circuit protection
  • High-precision version: OPAx863A
  • Wide-bandwidth
    • Unity-gain bandwidth: 110-MHz (AV= 1 V/V)
    • Gain-bandwidth product: 50-MHz
  • Low power
    • Quiescent current: 700-µA/ch (typical)
    • Power down mode: 1.5-µA (maximum, VS= 3 V)
    • Supply voltage: 2.7-V to 12.6-V
  • Input voltage noise: 5.9-nV/√Hz
  • Slew rate: 105-V/µs
  • Rail-to-rail input and output
  • HD2/HD3: –129 dBc/–138 dBc at 20 kHz (2-VPP)
  • Operating temperature range: –40°C to +125°C
  • Additional features:
    • Overload power limit
    • Output short-circuit protection
  • High-precision version: OPAx863A

The OPAx863 devices are low-power, unity-gain stable, rail-to-rail input and output, voltage-feedback operational amplifiers designed to operate over a power supply range of 2.7-V to 12.6-V. Consuming only 700-µA per channel, the OPAx863 devices offer a gain-bandwidth product of 50-MHz, slew rate of 105-V/µs with a voltage noise density of 5.9-nV/√Hz.

The rail-to-rail input stage with 2.7-V supply operation is useful in portable battery powered applications. The rail-to-rail input stage is well matched for gain-bandwidth product and noise across the full input common-mode voltage range, enabling superior performance with wide-input dynamic range. The OPA863 features a power-down (PD) mode with a PD quiescent current (IQ) of 1.5-µA (maximum) with turn-on or turn-off within 6.5-µs with a 3-V supply.

The OPAx863 devices include overload power limiting to limit the increase in IQ with saturated outputs, thereby preventing excessive power dissipation in power conscious battery-operated systems. The output stage is short-circuit protected, making it conducive to ruggedized environments.

The OPAx863 devices are low-power, unity-gain stable, rail-to-rail input and output, voltage-feedback operational amplifiers designed to operate over a power supply range of 2.7-V to 12.6-V. Consuming only 700-µA per channel, the OPAx863 devices offer a gain-bandwidth product of 50-MHz, slew rate of 105-V/µs with a voltage noise density of 5.9-nV/√Hz.

The rail-to-rail input stage with 2.7-V supply operation is useful in portable battery powered applications. The rail-to-rail input stage is well matched for gain-bandwidth product and noise across the full input common-mode voltage range, enabling superior performance with wide-input dynamic range. The OPA863 features a power-down (PD) mode with a PD quiescent current (IQ) of 1.5-µA (maximum) with turn-on or turn-off within 6.5-µs with a 3-V supply.

The OPAx863 devices include overload power limiting to limit the increase in IQ with saturated outputs, thereby preventing excessive power dissipation in power conscious battery-operated systems. The output stage is short-circuit protected, making it conducive to ruggedized environments.
open-in-new Find other High-speed op amps (GBW ≥ 50 MHz)
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 1
Type Title Date
* Data sheet OPAx863 Low-Power, 110-MHz, Rail-to-Rail Input and Output Amplifier datasheet (Rev. I) PDF | HTML 16 Dec 2022

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DEM-OPA-TSSOP-4A — Quad op amp evaluation module for TSSOP-14 package

User guide: PDF
Not available on TI.com
Calculation tool

ANALOG-ENGINEER-CALC — Analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
Download
Calculation tool

VOLT-DIVIDER-CALC — Voltage Divider Determines A Set of Resistors for a Voltage Divider

VOLT-DIVIDER-CALC quickly determines a set of resistors for a voltage divider. This KnowledgeBase Javascript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. This calculator can also be used to design non-inverting attentuation circuits.

(...)

Design now
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
View options
Package Pins Download
TSSOP (PW) 14 View options
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos