Top

Product details

Parameters

Common mode voltage (Max) (V) 36 Common mode voltage (Min) (V) 2.7 Input offset (+/-) (Max) (uV) 1000 Input offset drift (+/-) (Typ) (uV/C) 1 Gain (V/V) Adjustable Gain error (%) 2 Gain error drift (+/-) (Max) (ppm/°C) 100 CMRR (Min) (dB) 100 Bandwidth (kHz) 440 Supply voltage (Max) (V) 40 Supply voltage (Min) (V) 2.7 Iq (Max) (mA) 0.125 Number of channels (#) 1 Comparators (#) 0 Features Current Output Rating Catalog Operating temperature range (C) -40 to 125 open-in-new Find other Current sense amplifiers analog output

Package | Pins | Size

SOT-23 (DBV) 5 5 mm² 2.9 x 1.6 open-in-new Find other Current sense amplifiers analog output

Features

  • Complete Unipolar High-Side Current Measurement Circuit
  • Wide Supply and Common-Mode Range
  • INA139: 2.7 V to 40 V
  • INA169: 2.7 V to 60 V
  • Independent Supply and Input Common-Mode Voltages
  • Single Resistor Gain Set
  • Low Quiescent Current: 60 µA (Typical)
  • 5-Pin, SOT-23 Packages

All trademarks are the property of their respective owners.

open-in-new Find other Current sense amplifiers analog output

Description

The INA139 and INA169 are high-side, unipolar, current shunt monitors. Wide input common-mode voltage range, high-speed, low quiescent current, and tiny SOT-23 packaging enable use in a variety of applications.

Input common-mode and power-supply voltages are independent and can range from 2.7 V to 40 V for the INA139 and 2.7 V to 60 V for the INA169. Quiescent current is only 60 µA, which permits connecting the power supply to either side of the current measurement shunt with minimal error.

The device converts a differential input voltage to a current output. This current is converted back to a voltage with an external load resistor that sets any gain from 1 to over 100. Although designed for current shunt measurement, the circuit invites creative applications in measurement and level shifting.

Both the INA139 and INA169 are available in 5-pin SOT-23 packages. The INA139 device is specified for the –40°C to +125°C temperature range, and the INA169 is specified from –40°C to +85°C.

open-in-new Find other Current sense amplifiers analog output
Download

Technical documentation

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Design tools & simulation

SIMULATION MODELS Download
SBOM946.TSC (79 KB) - TINA-TI Reference Design
SIMULATION MODELS Download
SBOM947.ZIP (8 KB) - TINA-TI Spice Model
SIMULATION TOOLS Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide

Reference designs

REFERENCE DESIGNS Download
10V-13V Input Constant Output Current Capacitor-Charger Boost Converter (28V@0.13A) Reference Design
PMP11228 — This 28V boost converter charges a capacitor "bank" at a constant 0.13A to reduce the power drawn from the 10V - 13V input. Two control loop are implemented; one to regulate output current and a second to regulate output voltage. This design can support high pulse load currents at a repetitive rate (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
SOT-23 (DBV) 5 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos