Product details

Number of channels (#) 1 Total supply voltage (Min) (+5V=5, +/-5V=10) 5 Total supply voltage (Max) (+5V=5, +/-5V=10) 36 GBW (Typ) (MHz) 11 Slew rate (Typ) (V/us) 20 Rail-to-rail In to V-, Out Vos (offset voltage @ 25 C) (Max) (mV) 3.5 Iq per channel (Typ) (mA) 1.8 Vn at 1 kHz (Typ) (nV/rtHz) 5.1 Features Burr-Brown™ Audio, Premium Sound THD + N @ 1 kHz (Typ) (%) 0.00005 Rating Catalog Operating temperature range (C) -40 to 85 Output current (Typ) (mA) 30 Architecture FET CMRR (Typ) (dB) 126 Input bias current (Max) (pA) 20
Number of channels (#) 1 Total supply voltage (Min) (+5V=5, +/-5V=10) 5 Total supply voltage (Max) (+5V=5, +/-5V=10) 36 GBW (Typ) (MHz) 11 Slew rate (Typ) (V/us) 20 Rail-to-rail In to V-, Out Vos (offset voltage @ 25 C) (Max) (mV) 3.5 Iq per channel (Typ) (mA) 1.8 Vn at 1 kHz (Typ) (nV/rtHz) 5.1 Features Burr-Brown™ Audio, Premium Sound THD + N @ 1 kHz (Typ) (%) 0.00005 Rating Catalog Operating temperature range (C) -40 to 85 Output current (Typ) (mA) 30 Architecture FET CMRR (Typ) (dB) 126 Input bias current (Max) (pA) 20
SOIC (D) 8 19 mm² 4.9 x 3.9 VSSOP (DGK) 8 15 mm² 3 x 4.9
  • Superior Sound Quality
  • True JFET Input Operational Amplifier
    With Low Input Bias Current
  • Low Noise: 5.1 nV/√Hz at 1 kHz
  • Ultralow Distortion: 0.00005% at 1 kHz
  • High Slew Rate: 20 V/µs
  • Unity Gain Stable
  • No Phase Reversal
  • Low Quiescent Current:
    1.8 mA per Channel
  • Rail-to-rail Output
  • Wide Supply Range: ±2.25 V to ±18 V
  • Single, Dual, and Quad Versions Available
  • Superior Sound Quality
  • True JFET Input Operational Amplifier
    With Low Input Bias Current
  • Low Noise: 5.1 nV/√Hz at 1 kHz
  • Ultralow Distortion: 0.00005% at 1 kHz
  • High Slew Rate: 20 V/µs
  • Unity Gain Stable
  • No Phase Reversal
  • Low Quiescent Current:
    1.8 mA per Channel
  • Rail-to-rail Output
  • Wide Supply Range: ±2.25 V to ±18 V
  • Single, Dual, and Quad Versions Available

The OPA1641 (single), OPA1642 (dual), and OPA1644 (quad) series are JFET-input, ultralow distortion, low-noise operational amplifiers fully specified for audio applications.

The OPA1641, OPA1642, and OPA1644 rail-to-rail output swing allows increased headroom, making these devices ideal for use in any audio circuit. Features include 5.1-nV/√Hz noise, low THD+N (0.00005%), a low input bias current of 2 pA, and low quiescent current of 1.8 mA per channel.

These devices operate over a very wide supply voltage range of ±2.25 V to ±18 V. The OPA1641, OPA1642, and OPA1644 series of operational amplifiers are unity-gain stable and provide excellent dynamic behavior over a wide range of load conditions.

The dual and quad versions feature completely independent circuitry for lowest crosstalk and freedom from interactions between channels, even when overdriven or overloaded.

The OPA1641, OPA1642, and OPA1644 are specified from –40°C to +85°C.

The OPA1641 (single), OPA1642 (dual), and OPA1644 (quad) series are JFET-input, ultralow distortion, low-noise operational amplifiers fully specified for audio applications.

The OPA1641, OPA1642, and OPA1644 rail-to-rail output swing allows increased headroom, making these devices ideal for use in any audio circuit. Features include 5.1-nV/√Hz noise, low THD+N (0.00005%), a low input bias current of 2 pA, and low quiescent current of 1.8 mA per channel.

These devices operate over a very wide supply voltage range of ±2.25 V to ±18 V. The OPA1641, OPA1642, and OPA1644 series of operational amplifiers are unity-gain stable and provide excellent dynamic behavior over a wide range of load conditions.

The dual and quad versions feature completely independent circuitry for lowest crosstalk and freedom from interactions between channels, even when overdriven or overloaded.

The OPA1641, OPA1642, and OPA1644 are specified from –40°C to +85°C.

Download

Similar products you might be interested in

open-in-new Compare products
Pin-for-pin with same functionality to the compared device.
NEW OPA1655 ACTIVE SoundPlus™ ultra-low noise and distortion, Burr-Brown™ single audio operational amplifier

SoundPlus™ audio op amp with wider bandwidth and lower noise

Technical documentation

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Simulation model

OPA164x TINA-TI Spice Model (Rev. D)

SBOM407D.ZIP (11 KB) - TINA-TI Spice Model
Simulation model

OPA164xTINA-TI Reference Design (Rev. D)

SBOM408D.TSC (289 KB) - TINA-TI Reference Design
Simulation model

OPA164x PSpice Model (Rev. D)

SBOM627D.ZIP (30 KB) - PSpice Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
Calculation tool

ANALOG-ENGINEER-CALC — Analog engineer's calculator

The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
lock = Requires export approval (1 minute)
Package Pins Download
SOIC (D) 8 View options
VSSOP (DGK) 8 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos