Top

Product details

Parameters

Common mode voltage (Max) (V) 26 Common mode voltage (Min) (V) -0.3 Input offset (+/-) (Max) (uV) 60 Input offset drift (+/-) (Typ) (uV/C) 0.1 Gain (V/V) 100 Gain error (%) 0.5, 1.0 Gain error drift (+/-) (Max) (ppm/°C) 10 CMRR (Min) (dB) 105 Bandwidth (kHz) 30 Supply voltage (Max) (V) 26 Supply voltage (Min) (V) 2.7 Iq (Max) (mA) 0.115 Number of channels (#) 1 Comparators (#) 0 Features Bi-directional, Low-side Capable Rating Automotive TI functional safety category Functional Safety-Capable Operating temperature range (C) -40 to 125 open-in-new Find other Current sense amplifiers analog output

Package | Pins | Size

SOT-SC70 (DCK) 6 4 mm² 2 x 2.1 open-in-new Find other Current sense amplifiers analog output

Features

  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • Wide common-mode range: –0.3 V to 26 V
  • Offset voltage: ±100 µV (maximum)
    (enables shunt drops of 10-mV full-scale)
  • Accuracy:
    • Gain error:
      • ±1% (max over temperature, versions A, B)
      • ±0.5% (version C)
    • Offset drift: 0.5-µV/°C (maximum)
    • Gain drift: 10-ppm/°C (maximum)
  • Choice of gain:
    • INA210-Q1: 200 V/V
    • INA211-Q1: 500 V/V
    • INA212-Q1: 1000 V/V
    • INA213-Q1: 50 V/V
    • INA214-Q1: 100 V/V
    • INA215-Q1: 75 V/V
  • Quiescent current: 100 µA (maximum)
  • Package: 6-pin SC70

All trademarks are the property of their respective owners.

open-in-new Find other Current sense amplifiers analog output

Description

The INA21x-Q1 family of devices is a voltage-output, current-shunt monitor (also called a current-sense amplifier) that can sense drops across shunts at common-mode voltages from –0.3 V to 26 V, independent of the supply voltage. Five fixed gains are available: 50 V/V, 75 V/V, 100 V/V, 200 V/V, 500 V/V, and 1000 V/V. This family of devices is commonly used for overcurrent detection, voltage feedback control loops, or as a power monitor. The low offset of the zero-drift architecture enables current sensing with maximum drops across the shunt as low as 10-mV full-scale.

The devices operate from a single 2.7-V to 26-V power supply, drawing a maximum of 100 µA of supply current. The devices are specified over the operating temperature range of –40°C to +125°C and are offered in a 6-pin SC70 package.

open-in-new Find other Current sense amplifiers analog output
Download
Similar products you might be interested in
open-in-new Compare products
Same functionality and pinout but is not an equivalent to the compared device:
INA199-Q1 ACTIVE AEC-Q100, 26V, bi-directional current sense amplifier The INA199-Q1 is functionally identical with reduced accuracy at a lower price
INA210-Q1 ACTIVE AEC-Q100, 26V, bi-directional, high-precision current sense amplifier The device has identical performance but at a gain of 200
INA213-Q1 ACTIVE AEC-Q100, 26V, bi-directional, high-precision current sense amplifier The device has identical performance but at a gain of 50
INA215-Q1 ACTIVE AEC-Q100, 26V, bi-directional, high-precision current sense amplifier The device has identical performance but at a gain of 75

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 16
Type Title Date
* Datasheet INA21x-Q1 Automotive-Grade, Voltage Output, Low-Side or High-Side Measurement, Bidirectional, Zero-Drift Series, Current-Shunt Monitors datasheet (Rev. J) Apr. 24, 2020
Technical articles How current-sense amplifiers monitor satellite health Feb. 08, 2021
Application note Precision Current Measurements on High-Voltage Power-Supply Rails (Rev. D) Dec. 29, 2020
Application note Low-Drift, Low-Side, Bidirectional Current Sensing Circuit (Rev. A) Dec. 02, 2020
Functional safety information INA21x-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA Mar. 23, 2020
Application note Precision, Low-Side Current Measurement (Rev. B) Mar. 06, 2019
Application note External current sense amps vs integrated onboard amplifiers for current sensing (Rev. B) Feb. 19, 2019
Technical articles A key to accurate system thermal management: monitoring both current flow and temperature Oct. 04, 2018
Application note Integrating a Current Sense Resistor With a Current Sense Amplifier (Rev. B) Jul. 20, 2018
Technical articles System trade-offs for high- and low-side current measurements Jun. 01, 2017
Application note Low-Side Current Sense Circuit Integration Mar. 30, 2017
Application note Integrating The Current Sensing Signal Path (Rev. A) Dec. 02, 2016
User guide INA210-215EVM User's Guide Hardware Version 2 Jul. 08, 2016
Technical articles Why should you care about overcurrent protection in your system? Jun. 16, 2016
More literature Over-Current Detection Products Brochure Aug. 14, 2014
User guide INA210-215EVM User's Guide (Rev. A) Jun. 12, 2014

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
document-generic User guide
25
Description

The INA210-215 devices are voltage output, high-side measurement, bi-directional, zero-drift current shunt monitors. The INA210-215EVM is intended to provide basic functional evaluation of this device family.  The fixture layout is not intended to be a model for the target circuit, nor is it (...)

Features
  • Evaluation of all gain options through provided device
  • Ease of access to device pins with test points
  • Space for optional input filtering capacitors and resistors
  • Multiple input signal options


Design tools & simulation

SIMULATION MODEL Download
SBOM328A.ZIP (41 KB) - PSpice Model
SIMULATION MODEL Download
SBOM329A.TSC (105 KB) - TINA-TI Reference Design
SIMULATION MODEL Download
SBOM330A.ZIP (7 KB) - TINA-TI Spice Model
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SIMULATION TOOL Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide
CALCULATION TOOL Download
SBOR020A.ZIP (525 KB)

Reference designs

REFERENCE DESIGNS Download
Current Shunt Monitor with Transient Robustness Reference Design
TIDA-00302 This high-side current shunt monitor is used to measure the voltage developed across a current-sensing resistor when current passes through it.

Additionally, an external protection circuit is implemented to provide surge and fast-transient protection and demonstrate the different immunity levels to (...)

document-generic Schematic document-generic User guide
Design files

CAD/CAE symbols

Package Pins Download
SC70 (DCK) 6 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos