Product details

Number of channels (#) 1 Vs (Min) (V) 2.7 Vs (Max) (V) 36 CMRR (Min) (dB) 70 Common mode input low (Min) (V) -200 Common mode input high (Max) (V) 200 Input offset (+/-) (Max) (uV) 5000 Iq (Typ) (mA) 0.6 Small signal bandwidth (Typ) (MHz) 0.1 Slew rate (Typ) (V/us) 1 Gain (Min) (V/V) 1 Gain (Max) (V/V) 1 Gain error (+/-) (Max) (%) 0.075 Rating Catalog Operating temperature range (C) -55 to 125 Gain drift (Max) (ppm/C) 3
Number of channels (#) 1 Vs (Min) (V) 2.7 Vs (Max) (V) 36 CMRR (Min) (dB) 70 Common mode input low (Min) (V) -200 Common mode input high (Max) (V) 200 Input offset (+/-) (Max) (uV) 5000 Iq (Typ) (mA) 0.6 Small signal bandwidth (Typ) (MHz) 0.1 Slew rate (Typ) (V/us) 1 Gain (Min) (V/V) 1 Gain (Max) (V/V) 1 Gain error (+/-) (Max) (%) 0.075 Rating Catalog Operating temperature range (C) -55 to 125 Gain drift (Max) (ppm/C) 3
SOIC (D) 8 19 mm² 3.91 x 4.9
  • LOW NONLINEARITY: 0.002% max
  • HIGH COMMON-MODE VOLTAGE:
    • +75V at VS = +5V
    • ±200V at VS = ±15V
  • FIXED DIFFERENTIAL GAIN = 1V/V
  • LOW QUIESCENT CURRENT: 260µA
  • WIDE SUPPLY RANGE:
    • Single Supply: 2.7V to 36V
    • Dual Supplies: ±1.35V to ±18V
  • LOW GAIN ERROR: 0.075% max
  • HIGH CMR: 86dB
  • SO-8 PACKAGE
  • LOW NONLINEARITY: 0.002% max
  • HIGH COMMON-MODE VOLTAGE:
    • +75V at VS = +5V
    • ±200V at VS = ±15V
  • FIXED DIFFERENTIAL GAIN = 1V/V
  • LOW QUIESCENT CURRENT: 260µA
  • WIDE SUPPLY RANGE:
    • Single Supply: 2.7V to 36V
    • Dual Supplies: ±1.35V to ±18V
  • LOW GAIN ERROR: 0.075% max
  • HIGH CMR: 86dB
  • SO-8 PACKAGE

The INA148 is a precision, low-power, unity-gain difference amplifier with a high common-mode input voltage range. It consists of a monolithic precision bipolar op amp with a thin-film resistor network.

The on-chip resistors are laser trimmed for an accurate 1V/V differential gain and high common-mode rejection. Excellent temperature tracking of the resistor network maintains high gain accuracy and common-mode rejection over temperature. The INA148 will operate on single or dual supplies.

The INA148 is available in a small SO-8 surface-mount package and it is specified for the –40°C to +85°C extended industrial temperature range.

The INA148 is a precision, low-power, unity-gain difference amplifier with a high common-mode input voltage range. It consists of a monolithic precision bipolar op amp with a thin-film resistor network.

The on-chip resistors are laser trimmed for an accurate 1V/V differential gain and high common-mode rejection. Excellent temperature tracking of the resistor network maintains high gain accuracy and common-mode rejection over temperature. The INA148 will operate on single or dual supplies.

The INA148 is available in a small SO-8 surface-mount package and it is specified for the –40°C to +85°C extended industrial temperature range.

Download

Similar products you might be interested in

open-in-new Compare products
Drop-in replacement with upgraded functionality to the compared device.
INA149 ACTIVE High Common Mode Voltage Difference Amplifier For wider common mode input range (±275) and lower power consumption (0.81mA) see the INA149

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 5
Type Title Date
* Data sheet +/-200V Common-Mode Voltage Difference Amplifier datasheet 27 Sep 2000
Application note Supporting High Voltage Common Mode Using Difference Amplifier 08 Mar 2021
Application note 16-Bit 8-Channel PLC Analog Input Module with High Voltage (±150 V) Common Mode 27 Apr 2020
E-book The Signal e-book: A compendium of blog posts on op amp design topics 28 Mar 2017
Technical article Difference Amplifiers—the need for well-matched resistors 25 Apr 2012

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DIP-ADAPTER-EVM — DIP adapter evaluation module

Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.

The (...)

Simulation model

INA148 TINA-TI Spice Model (Rev. A)

SBFC028A.ZIP (5 KB) - TINA-TI Spice Model
Simulation model

INA148 PSpice Model (Rev. A)

SBOC019A.ZIP (55 KB) - PSpice Model
Simulation model

INA148 TINA-TI Reference Design (Rev. B)

SBOC156B.TSC (83 KB) - TINA-TI Reference Design
Simulation model

INA148 TINA-TI Linear Operation Checker

SBOMBK8.TSC (29 KB) - TINA-TI Spice Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Package Pins Download
SOIC (D) 8 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos