Top

Product details

Parameters

Architecture Current FB Number of channels (#) 2 Total supply voltage (Min) (+5V=5, +/-5V=10) 5.75 Total supply voltage (Max) (+5V=5, +/-5V=10) 12 GBW (Typ) (MHz) 250 BW @ Acl (MHz) 250 Acl, min spec gain (V/V) 1 Slew rate (Typ) (V/us) 2000 Vn at flatband (Typ) (nV/rtHz) 2 Vn at 1 kHz (Typ) (nV/rtHz) 2 Iq per channel (Typ) (mA) 9 Vos (offset voltage @ 25 C) (Max) (mV) 4.5 Rail-to-rail No Features Shutdown, Adjustable BW/IQ/IOUT Rating Catalog Operating temperature range (C) -40 to 85 CMRR (Typ) (dB) 55 Input bias current (Max) (pA) 25000000 Offset drift (Typ) (uV/C) 4 Output current (Typ) (mA) 500 2nd harmonic (dBc) 72 3rd harmonic (dBc) 81 @ MHz 5 open-in-new Find other High-speed op amps (GBW>=50MHz)

Package | Pins | Size

SOIC (D) 8 19 mm² 3.91 x 4.9 SOIC (D) 14 52 mm² 8.65 x 6 open-in-new Find other High-speed op amps (GBW>=50MHz)

Features

  • WIDEBAND +12V OPERATION: 220MHz (G = +4)
  • UNITY-GAIN STABLE: 250MHz (G = +1)
  • HIGH OUTPUT CURRENT: 500mA
  • OUTPUT VOLTAGE SWING: 10VPP
  • HIGH SLEW RATE: 2000V/µs
  • LOW SUPPLY CURRENT: 18mA
  • FLEXIBLE POWER CONTROL: SO-14 Only
  • OUTPUT CURRENT LIMIT (±800mA)
  • APPLICATIONS
    • POWER LINE MODEM
    • xDSL LINE DRIVERS
    • CABLE MODEM DRIVERS
    • MATCHED I/Q CHANNEL AMPLIFIERS
    • BROADBAND VIDEO LINE DRIVERS
    • ARB LINE DRIVERS
    • HIGH CAP LOAD DRIVER

All trademarks are the property of their respective owners.

open-in-new Find other High-speed op amps (GBW>=50MHz)

Description

The OPA2674 provides the high output current and low distortion required in emerging xDSL and Power Line Modem driver applications. Operating on a single +12V supply, the OPA2674 consumes a low 9mA/ch quiescent current to deliver a very high 500mA output current. This output current supports even the most demanding ADSL CPE requirements with > 380mA minimum output current (+25°C minimum value) with low harmonic distortion. Differential driver applications deliver < –85dBc distortion at the peak upstream power levels of full rate ADSL. The high 200MHz bandwidth also supports the most demanding VDSL line driver requirements.

Power control features are included in the SO-14 package version to allow system power to be minimized. Two logic control lines allow four quiescent power settings. These include full power, power cutback for short loops, idle state for no signal transmission but line match maintenance, and shutdown for power off with a high impedance output.

Specified on ±6V supplies (to support +12V operation), the OPA2674 will also support a single +5V or dual ±5V supply. Video applications will benefit from a very high output current to drive up to 10 parallel video loads (15Ω) with < 0.1%/0.1° dG/dP nonlinearity.

open-in-new Find other High-speed op amps (GBW>=50MHz)
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 14
Type Title Date
* Datasheet Dual Wideband High Output Current Operational Amplifier with Current Limit datasheet (Rev. C) Aug. 28, 2008
Technical articles How to reduce distortion in high-voltage, high-frequency signal generation for AWGs Oct. 30, 2018
Technical articles What are the advantages of using JFET-input amplifiers in high-speed applications? Jun. 18, 2018
Technical articles Unique active mux capability combines buffer and switch into one solution Oct. 10, 2017
White papers The Signal e-book: A compendium of blog posts on op amp design topics Mar. 28, 2017
Technical articles How to minimize filter loss when you drive an ADC Oct. 20, 2016
User guides DEM-OPA-SO-2A User's Guide (Rev. B) Apr. 30, 2010
Application notes Wireline Data Transmission and Reception Jan. 27, 2010
User guides DEM-OPA-MSOP-2A User's Guide (Rev. A) May 25, 2006
User guides DEM-OPA-SO-2D User's Guide (Rev. A) May 25, 2006
Application notes Noise Analysis for High Speed Op Amps (Rev. A) Jan. 17, 2005
Application notes Stabilizing Current-Feedback Op Amps While Optimizing Circuit Performance Apr. 28, 2004
Application notes Measuring Board Parasitics in High-Speed Analog Design Jul. 07, 2003
Application notes Current Feedback Amplifiers: Review, Stability Analysis, and Applications Nov. 20, 2000

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
5
Description
 The DEM-OPA-SO-2A demonstration fixture helps designers evaluate the operation and performance of TI's dual, high speed, wideband operational amplifiers. This unpopulated PC board (PCB) is compatible with products offered in the 8-lead SOIC (D) package.
 
For more information on these types of op amps (...)
EVALUATION BOARDS Download
document-generic User guide
5
EVALUATION BOARDS Download
document-generic User guide
Description

The DEM-OPA268xN demonstration board is an unpopulated printed circuit board (PCB) for the high speed dual op amps with disable available in SO-14 packages. The DEM-OPA268xN supports Burr-Brown's OPA2680N, OPA2681N, and OPA2682N. For more information on these op amps, and good PCB layout techniques (...)

EVALUATION BOARDS Download
document-generic User guide
Description

The DEM-OPA268xU demonstration board is an unpopulated printed circuit board (PCB) for the high speed dual op amps in SO-8 packages.

Design tools & simulation

SIMULATION MODELS Download
SBOC229A.ZIP (3 KB) - PSpice Model
SIMULATION MODELS Download
SBOMA23.TSC (2652 KB) - TINA-TI Reference Design
SIMULATION MODELS Download
SBOMA24.ZIP (6 KB) - TINA-TI Spice Model
SIMULATION TOOLS Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SIMULATION TOOLS Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide
CALCULATION TOOLS Download
Analog engineer's calculator
ANALOG-ENGINEER-CALC — The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
Features
  • Expedites circuit design with analog-to-digital converters (ADCs) and digital-to-analog converters (DACs)
    • Noise calculations
    • Common unit translation
  • Solves common amplifier circuit design problems
    • Gain selections using standard resistors
    • Filter configurations
    • Total noise for common amplifier configurations
  • (...)
CALCULATION TOOLS Download
Voltage Divider Determines A Set of Resistors for a Voltage Divider
VOLT-DIVIDER-CALC VOLT-DIVIDER-CALC quickly determines a set of resistors for a voltage divider. This KnowledgeBase Javascript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. This calculator can also be used to design non-inverting attentuation circuits.

(...)

CAD/CAE symbols

Package Pins Download
SOIC (D) 14 View options
SOIC (D) 8 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos