Product details

Resolution (Bits) 31 Number of input channels 2 Sample rate (Max) (kSPS) 4 Interface type SPI Architecture Delta-Sigma Input type Differential Multi-channel configuration Multiplexed Rating Space Reference mode Ext Input range (Max) (V) 1.15, 3.75 Input range (Min) (V) -1.9, 0.7 Features PGA Operating temperature range (C) -55 to 115, -55 to 125, 25 to 25 Power consumption (Typ) (mW) 25 Analog voltage AVDD (Min) (V) -2.5, 0 SNR (dB) 130 Analog voltage AVDD (Max) (V) 2.5, 5 INL (Max) (+/-LSB) 17179.9 Digital supply (Min) (V) 1.65 Digital supply (Max) (V) 3.6
Resolution (Bits) 31 Number of input channels 2 Sample rate (Max) (kSPS) 4 Interface type SPI Architecture Delta-Sigma Input type Differential Multi-channel configuration Multiplexed Rating Space Reference mode Ext Input range (Max) (V) 1.15, 3.75 Input range (Min) (V) -1.9, 0.7 Features PGA Operating temperature range (C) -55 to 115, -55 to 125, 25 to 25 Power consumption (Typ) (mW) 25 Analog voltage AVDD (Min) (V) -2.5, 0 SNR (dB) 130 Analog voltage AVDD (Max) (V) 2.5, 5 INL (Max) (+/-LSB) 17179.9 Digital supply (Min) (V) 1.65 Digital supply (Max) (V) 3.6
CFP (TBAR) (HKV) 28 232 mm² 12.7 x 18.2
  • QMLV (QML Class V) MIL-PRF-38535 Qualified and Radiation Hardness Assured (RHA), SMD 5962-14231
    • 5962L1423101VXC - Qualified over the Military Temperature Range (–55°C to 125°C)
    • 5962L1423102VXC - Qualified over Reduced Temperature Range (–55°C to 115°C) for Improved Dynamic Performance
  • 5962L14231:
    • Radiation Hardness Assurance (RHA) up to Total Ionizing Dose (TID) 50 kRAD (Si)
    • Single Event Latchup (SEL) Immune to LET = 50 MeV-cm2/mg at 125°C
    • Single Event Latchup (SEL) Immune to LET = 60 MeV-cm2/mg at 85°C
  • High Resolution: 124-dB SNR (1000 SPS)
  • High Accuracy: THD: –102 dB
    INL: 0.5 ppm
  • Low-Noise PGA
  • Two-Channel Input MUX
  • Inherently-Stable Modulator With Fast Responding Over-Range Detection
  • Flexible Digital Filter:
    • Sinc + FIR + IIR (Selectable)
    • Linear or Minimum Phase Response
    • Programmable High-Pass Filter
    • Selectable FIR Data Rates:
      250 SPS to 4 kSPS
  • Filter Bypass Option
  • Low-Power Consumption: 25 mW
  • Offset and Gain Calibration Engine
  • SYNC Input
  • Analog Supply: Unipolar (5 V) or Bipolar (±2.5 V)
  • Digital Supply: 1.75 to 3.3 V
  • QMLV (QML Class V) MIL-PRF-38535 Qualified and Radiation Hardness Assured (RHA), SMD 5962-14231
    • 5962L1423101VXC - Qualified over the Military Temperature Range (–55°C to 125°C)
    • 5962L1423102VXC - Qualified over Reduced Temperature Range (–55°C to 115°C) for Improved Dynamic Performance
  • 5962L14231:
    • Radiation Hardness Assurance (RHA) up to Total Ionizing Dose (TID) 50 kRAD (Si)
    • Single Event Latchup (SEL) Immune to LET = 50 MeV-cm2/mg at 125°C
    • Single Event Latchup (SEL) Immune to LET = 60 MeV-cm2/mg at 85°C
  • High Resolution: 124-dB SNR (1000 SPS)
  • High Accuracy: THD: –102 dB
    INL: 0.5 ppm
  • Low-Noise PGA
  • Two-Channel Input MUX
  • Inherently-Stable Modulator With Fast Responding Over-Range Detection
  • Flexible Digital Filter:
    • Sinc + FIR + IIR (Selectable)
    • Linear or Minimum Phase Response
    • Programmable High-Pass Filter
    • Selectable FIR Data Rates:
      250 SPS to 4 kSPS
  • Filter Bypass Option
  • Low-Power Consumption: 25 mW
  • Offset and Gain Calibration Engine
  • SYNC Input
  • Analog Supply: Unipolar (5 V) or Bipolar (±2.5 V)
  • Digital Supply: 1.75 to 3.3 V

The ADS1282-SP is a radiation-tolerant extremely high-performance, single-chip analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (MUX). ADS1282-SP is suitable for the demanding needs of space applications providing ultra-precision performance while maintaining radiation tolerance suitable for a large variety of satellites, payloads, sensing and other harsh environment applications.

The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post processing filters.

The flexible input MUX provides an additional external input for measurement, as well as internal self-test connections. The PGA features outstanding low noise (5 nV/√Hz) and high input impedance, allowing easy interfacing to transducers over a wide range of gains.

The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration.

The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1282s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source.

Together, the amplifier, modulator, and filter dissipate 30 mW. The ADS1282-SP is fully specified from –55°C to 125°C.

The ADS1282-SP is a radiation-tolerant extremely high-performance, single-chip analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (MUX). ADS1282-SP is suitable for the demanding needs of space applications providing ultra-precision performance while maintaining radiation tolerance suitable for a large variety of satellites, payloads, sensing and other harsh environment applications.

The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post processing filters.

The flexible input MUX provides an additional external input for measurement, as well as internal self-test connections. The PGA features outstanding low noise (5 nV/√Hz) and high input impedance, allowing easy interfacing to transducers over a wide range of gains.

The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration.

The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1282s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source.

Together, the amplifier, modulator, and filter dissipate 30 mW. The ADS1282-SP is fully specified from –55°C to 125°C.

Download

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 18
Type Title Date
* Data sheet ADS1282-SP Radiation Hardness Assured High-Resolution Delta Sigma ADC datasheet (Rev. B) PDF | HTML 22 Oct 2018
* Radiation & reliability report ADS1282-SP Total Ionizing Dose (TID) Radiation Report (Rev. A) 17 May 2022
* Radiation & reliability report Single-Event Effects Characterization of TI ADS1282-SP High-Resolution ADC 09 Oct 2017
* Radiation & reliability report ADS1282-SP Total Ionizing Dose (TID) Radiation Report 09 Nov 2016
* SMD ADS1282-SP SMD 5962-14231 08 Jul 2016
Application note Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. A) PDF | HTML 17 Nov 2022
Application note Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 19 Oct 2022
Design guide Series Resistance Temperature Detector (RTD) Sensing Reference Design PDF | HTML 26 Sep 2022
Application note Calculating Conversion Latency and System Cycle Time for Delta-Sigma ADCs PDF | HTML 23 Mar 2022
Application note Analog Front-End Design With Texas Instruments’ Tooling Landscape PDF | HTML 07 Mar 2022
Selection guide TI Space Products (Rev. I) 03 Mar 2022
E-book Fundamentals of Precision ADC Noise Analysis 19 Jun 2020
More literature TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing 17 Jun 2019
User guide ADS1282-SP Evaluation Module 19 Jul 2016
Technical article 7 things to know about spacecraft subsystems before your next trip to Mars 06 Jul 2016
User guide ADS1282-SP Overview User’s Guide 23 Jun 2016
User guide MSP430FR5969 Launchpad Firmware Flashing Guide for ADS1282-SP 15 Jun 2016
Technical article Leverage coherent sampling and FFT windows when evaluating SAR ADCs (Part 1) 13 Mar 2015

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

ADS1282EVM-CVAL

ADS1282-SP radiation-tolerant evaluation module

The ADS1282-SP EVM is a compact evaluation kit for evaluating the ADS1282-SP, a radiation-tolerant, extremely high-performance, dual-channel ADC. The ADS1282-SP EVM plugs directly to the MSP430FR5959 launchpad (not included with ADS1282-SP EVM) which connects to PC via USB. Complete evaluation (...)

User guide: PDF
Not available on TI.com
Development kit

MSP-EXP430FR5969

MSP430FR5969 LaunchPad™ development kit

Download Design Files

Ultra-low-power FRAM technology now joins the LaunchPad family.

The MSP-EXP430FR5969 LaunchPad Development Kit is an easy-to-use microcontroller development board for the MSP430FR5969 MCU. It contains everything needed to start developing quickly on the MSP430FRxx FRAM platform, (...)

User guide: PDF | HTML
Not available on TI.com
Firmware

MSP430FR5969 Launchpad Firmware Source for ADS1282-SP (Rev. A)

SBAC149A.ZIP (5404 KB)
lock = Requires export approval (1 minute)
Support software

ADS1282-SP EVM GUI Software (Rev. A)

SBAC150A.ZIP (74475 KB)
Support software

ADS1282 Example C Code

SBAC300.ZIP (533 KB)
Simulation model

ADS1282-SP IBIS MODEL

SLAM283.ZIP (80 KB) - IBIS Model
Calculation tool

ADC-INPUT-CALC — Analog-to-digital converter (ADC) input driver design tool supporting multiple input types

ADC-INPUT-CALC is an online tool that provides support for designing the input buffer to an analog-to-digital converter (ADC). It offers 24 different op-amp based buffer circuits that can be used to drive an ADC input. The available topologies cover differential, single-ended and (...)
Calculation tool

ANALOG-ENGINEER-CALC — Analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
lock = Requires export approval (1 minute)
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
Reference designs

TIDA-060042 — Series resistance temperature detector (RTD) sensing reference design

The TIDA-060042 reference design demonstrates a fully space-graded ratiometric temperature sensing circuit using ADS1282EVM-PDK. This circuit measures temperature at up to 10 different locations without any use of buffers. The majority of space applications require temperature measurement in (...)
Design guide: PDF
Package Pins Download
CFP (HKV) 28 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos